Sinclair ASH-13AIA PT Bedienungsanleitung
ARCTIC SERIES
indoor unit
ASH-13AIA PT, ASH-18AIA PT
USER'S MANUAL
„Original instruction“
Matching instructions
Specialties note
Matching of remote controller
Please done the following operation within 2m from the unit. Matching is not
needed anymore once it is done.
During matching, please keep the remote controller and air conditioner under
standby status.
When the signal of remote controller can’t be received, please match the remote
controller with the unit again.
This model adopts RF remote control. The remote controller
shall be matched with the air conditioner before operation,
otherwise the remote control will be invalid.
Before operation, please read the instructions in this page
carefully and then do the corresponding matching operation.
Note
When the unit is under standby status, please get close to the air conditioner within 2m
and then hold on pressing button for 3s. The remote controller and air
conditioner will enter matching automatically. If matching is done, the unit will give out
three sounds; if matching is failed, please get closer to the unit and arrange matching
again.
Humidify/Health
3
Precautions
WARNING
Do not connect air conditioner to multi-purpose socket.
This appliance can be used by children aged from 8
Operation and Maintenance
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Do not spray water on indoor unit. It may cause electric
shock or malfunction.
Otherwise, it may cause fire hazard.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Do not wash the air conditioner with water to avoid
electric shock.
After removing the filter, do not touch fins to avoid injury.
Do not use fire or hair dryer to dry the filter to avoid
deformation or fire hazard.
Do disconnect power supply when cleaning air
conditioner. Otherwise, it may cause electric shock.
.
5
Do not block air outlet or air inlet. It may cause
malfunction.
remote controller may be broken.
●Power cord is overheating or damaged.
●There’s abnormal sound during operation.
●Circuit break trips off frequently.
●Air conditioner gives off burning smell.
●Indoor unit is leaking.
contact the dealer or qualified professionals for service.
When turning on or turning off the unit by emergency
operation switch, please press this switch with an insulating
object other than metal.
outlet. It may cause personal injury or damage.
Precautions
WARNING
conditioner and disconnect power immediately, and then
If the air conditioner operates under abnormal conditions,
it may cause malfunction, electric shock or fire hazard.
Do not spill water on the remote controller, otherwise the
electric shock or damage. Please contact dealer when
you need to repair air conditioner.
Do not repair air conditioner by yourself. It may cause
objects. It may cause damage or personal injury.
Do not step on top panel of outdoor unit, or put heavy
When below phenomenon occurs, please turn off air
Do not extend fingers or objects into air inlet or air
Maintenance must be performed by qualified
professionals. Otherwise, it may cause personal injury
or damage.
6
Do install the circuit break. If not, it may cause malfunction.
of at least 3mm in all poles should be connected in fixed
wiring.
magnet buckle
and heating buckle function, it can protect
the circuit-short and
overload.
power supply circuit and circuit break.
Precautions
WARNING
note
the following table.Air switch should be included
Make sure the power supply matches with the
requirement of air conditioner.Unstable power supply or
incorrect wiring or malfunction. Please install proper power
supply cables before using the air conditioner.
An all-pole disconnection switch having a contact separation
Must follow the electric safety regulations when installing
the unit.
grounding wire of power socket.
Properly connect the live wire, neutral wire and
any work related to electricity and safety.
Be sure to cut off the power supply before proceeding
Including an circuit break with suitable capacity, please
Air Conditioner should be properly grounded. Incorrect
Don't use unqualified power cord.
grounding may cause electric shock.
According to the local safety regulations, use qualified
Installation must be performed by qualified professionals.
Otherwise, it may cause personal injury or damage.
Attachment
7
Installation must be performed in accordance with the
persons in order to avoid a hazard.
must be properly grounding with specialized grounding
device by a professional. Please make sure it is always
grounded effectively, otherwise it may cause electric shock.
The appliance must be positioned so that the plug is
accessible.
If the length of power connection wire is insufficient, please
contact the supplier for a new one. Avoid extending the
wire by yourself.
All wires of indoor unit and outdoor unit should be
connected by a professional.
national wiring regulations.
requirement of NEC and CEC by authorized personnel
only.
Precautions
WARNING
wire, which can't be used for other purposes.
The grounding resistance should comply with national
electric safety regulations.
The air conditioner is the first class electric appliance. It
keep the interconnection cable away from the copper
tube.
The temperature of refrigerant circuit will be high, please
the manufacturer, its service agent or similarly qualified
If the supply cord is damaged, it must be replaced by
The yellow-green wire in air conditioner is grounding
The appliance shall be installed in accordance with
Do not put through the power before finishing installation.
8
The indoor unit should be installed close to the wall.
reachable after finishing installation.
far away from animals or plants.If it is unavoidable,
please add the fence for safety purpose.
Precautions
WARNING
place, only the qualified person can perform the work.
Otherwise, it may cause personal injury or damage.
If you need to relocate the air conditioner to another
must be installed in the line.
For the air conditioner without plug, an circuit break
Select a location which is out of reach for children and
For the air conditioner with plug, the plug should be
Working temperature range
NOTICE:
Indoor side DB/WB(°C) Outdoor side DB/WB(°C)
Maximum cooling 32/23 54/26
Maximum heating 27/- 24/18
●
The operating temperature range (outdoor temperature) for cooling is -18℃~54℃;
The operating temperature range (outdoor temperature) for heating is -30°C~24°C
is -15℃~24 Heating temperature range for the model with electric heating belt
for chassis is -20℃~24℃.
9
Parts name
Indoor Unit
air inlet
panel
filter
power wire
horizontal louver
remote controller air outlet
tem.display power
display
NOTICE:
Actual product may be different from above graphics, please refer to actual
products.
10
Buttons on remote controller
Introduction for icons on display screen
3
2
5 6
10
11
12
15
9
17
14
13
16
8
7
4
1
1ON/OFF button
2+/- button
3Cool button
4Heat button
6I FEEL button
7up down swing button
9Left right swing button
14
X-fan button
15
Sleep button
Light button
16
17 WIFI button
11 Clock button
12
13
Humidity button/Health button
Air button
10 T-ON/T-OFF button
8Mode button
5Fan button
battery power
Send signal
8℃heating function
I feel function
Set fan speed
Temp. display type
:Set temp.
:Outdoor ambient temp.
:Indoor ambient temp.
Heat mode
Fan mode
Dry mode
Cool mode
Auto mode
Operation mode
humidity functions
Temp.display type
Healthy mode
Set temperature
INTELLIGENT
HOUR ON OFF
WIFI
Up & down swing
Left & right swing
child lock
Replacing air
Quiet mode
Auto quiet mode
X-FAN function
Turbo fan speed
Sleep mode
Set time
11
Andere Handbücher für ASH-13AIA PT
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Sinclair Klimaanlage Handbücher
Sinclair
Sinclair AMC-14Aa MOBILE SERIES Bedienungsanleitung
Sinclair
Sinclair MS-H07AIC PT Bedienungsanleitung
Sinclair
Sinclair ASF BI Series Bedienungsanleitung
Sinclair
Sinclair SDV4 series Bedienungsanleitung
Sinclair
Sinclair SF-85H Bedienungsanleitung
Sinclair
Sinclair Alpha Inverter Series Bedienungsanleitung
Sinclair
Sinclair Spectrum Series Bedienungsanleitung
Sinclair
Sinclair MULTI VARIABLE Bedienungsanleitung
Sinclair
Sinclair ASF-12A Bedienungsanleitung
Sinclair
Sinclair ASD-**BI series Bedienungsanleitung
Sinclair
Sinclair SF2 D3 Series Bedienungsanleitung
Sinclair
Sinclair SF C2M Series Bedienungsanleitung
Sinclair
Sinclair FC-D09AI Betriebsanleitung
Sinclair
Sinclair MV-H09BIF Bedienungsanleitung
Sinclair
Sinclair MULTI SYSTEM SERIES Bedienungsanleitung
Sinclair
Sinclair ASC-18AIA Bedienungsanleitung
Sinclair
Sinclair SOH-09BIK2 Bedienungsanleitung
Sinclair
Sinclair ASD-30BI Bedienungsanleitung
Sinclair
Sinclair ASH-18AK Series Bedienungsanleitung
Sinclair
Sinclair ASC-60AN Bedienungsanleitung
