Singer SGR-20100 Bedienungsanleitung

SGR-20100 & SGR-20200

Reﬁll steam generator

Reﬁll σύστημα σιδερώματος ατμού

Ютия спарогенератор

INSTRUCTION MANUAL

ΒΙΒΛΙΟ ΟΔΗΓΙΩΝ

ИНСТРУКЦИИ ЗА ЕКСПЛОАТАЦИЯ

ENGLISH

Read this manual thoroughly before using the

appliance and save it for future reference

IMPORTANT SAFEGUARDS

Before using the electrical appliance, basic precautions should

always be followed including the following:

Read all instructions.

1. Before using, check that the voltage of wall outlet corresponds

to the one shown on the rating plate.

2. Do not use the appliance if the main cord, plug, light or the

appliance itself shows visible damage, neither when the

appliance has been dropped or is leaking. Take it to the

nearest authorized service facility or a qualiﬁed repair agent

for examination and repair in order to avoid any hazard.

3. Do not allow the cord to come in contact with the soleplate

when this is hot.

4. Burns may occur from touching hot metal parts, hot water, or

steam.

5. Do not let cord hang over the edge of table or any hot surface.

6. To protect against the risk of electric shock, never immerse the

iron in water or other any other liquid. If this happens, do not

use the appliance again. Dispose the appliance.

7. Keep the appliance out of the reach of children.

8. Do not leave the appliance unattended while connected to the

power supply, or on an ironing board.

9. Always place or use the appliance on a stable and horizontal

surface.

10. The use of any accessory not recommended by manufacturer

may cause injuries to the person using the appliance or

damage the appliance.

11. When placing the iron on its stand, ensure that the surface on

ENGLISH

which the stand is placed is stable.

12. The drain water cap must always be well closed during the use

of the appliance.

13. Never ﬁll the water tank with hot water, scent, vinegar, starch,

descaler, fabric softener or any other chemical reagent.

14. Unplug the appliance from wall outlet when not in use, before

ﬁlling with water or cleaning it.

15. Do not use the appliance for any other purpose than its

intended use.

16. This appliance can be used by children from 8 years old and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning how to use

the appliance in a safe way and understand the hazards

involved.

17. Children shall not play with the appliance. Cleaning and

maintenance shall not be made by children without supervision.

18. The iron must not be left unattended while it is connected to

the mains supply.

19. The plug must be removed from the socket-outlet before the

water reservoir is ﬁlled with water.

20. The iron must be used and rested on a stable surface.

21. The iron is not to be used if it has been dropped, if there are

visible signs of damage or if it is leaking.

22. Keep the iron and its cord out of reach of children less than 8

years of age when it is energized or cooling down.

23. Do not use this appliance outdoors.

24. Do not touch the surfaces marked with symbol during

or just after ironing. It is hot!

25. Save these instructions.

ENGLISH

FOR HOUSEHOLD USE ONLY

SERVICE & REPAIR

1. For service or repair under warranty, please contact the authorized service

company that is mentioned on the guarantee card that accompanies the

product.

2. Do not operate any product with a damaged cord or plug. If the supply cord is

damaged, return the appliance to a SINGER service center for examination

repair or adjustment. Do not attempt to dismantle any part of the appliance.

This should only be done at an authorized SINGER service centre.

3. The partial or total non-respect of the safety instructions in the present

instruction manual will automatically release Singer of any type of

responsibility in case of malfunction of the machine or injuries to persons

or animals.

4. In case of manipulation, repairing or any modiﬁcation of the machine made

by unqualiﬁed persons or in case of improper use, the guarantee will be

automatically cancelled.

ENGLISH

KNOW YOUR STEAM STATION

1 Clean indicator light / Self-clean button

2.Temperature indicator light

3. Iron handset

4. Steam trigger

5. Temperature control dial

6. Lock button

7. Unlock button

8. Removable water tank

9. Power switch on (I)/off (O)/Indicator light for low water level

10.Base station

11.Steam cord

12.Power cord

ENGLISH

BEFORE FIRST USE

1. Remove any sticker, protective foil or storage cover from the soleplate.

2. Put the power cable into the socket. Note: Make sure the voltage which

is indicated on the device matches the local voltage before connecting

the device.

3. Place your steam generator on a stable, horizontal heat-resistant surface.

4. Never use the steam generator when water tank is empty, reﬁll it before use

it again.

5. Always make sure the continuous steam button is in the off position

before you will turn on the appliance. Only use the steam functions when

the appliance is preheated otherwise the water will not evaporate and the

appliance will leak water.

6. Heat up the iron to maximum temperature and iron over a piece of damp

cloth for several minutes for the purpose of removing any residue on the

soleplate according to the section of “Steam ironing”.

NOTE: It is normal that strange odor comes out from the unit for the ﬁrst

use. This will cease after a short while.

NOTE: Some particles may come out of the soleplate when you use the

iron for the ﬁrst time. This is normal; the particles are harmless and stop

coming out of the iron after a short while.

NOTE: When you switch on the appliance, the steam generator may

produce a pumping sound. This is normal; the sound tells you that water

is pumped into the steam generator.

NOTE: During the heating process of the soleplate, there will be little

steam coming out from the soleplate automatically and this phenomenon

will continue for about 3 seconds, this is normal.

USING YOUR STEAM STATION

The appliance has following ironing option: dry, vertical or steam ironing, the

details are referred below:

Dry ironing

If you intend to dry-iron fabrics, there is no need to ﬁll the water tank. However,

if water is already in the water tank, you do not need to empty it.

ENGLISH

1. Place the steam station on a stable and horizontal surface.

2. Rotate the temperature control dial to set the pointer to the desired heat

setting.

3. When the temperature indicator light turns solid your steam generator is

ready to use.

4. Iron your laundry without pressing the steam trigger.

WARNING: Never touch the hot soleplate before cooling down!

Vertical ironing

It is possible to iron hanging curtains and clothes on a hanger, etc. To do so:

1. Select the maximum iron temperature, turning the iron temperature

adjustment clockwise. Once the temperature indicator light turns solid, your

appliance is ready to use.

2. Hold the iron in a vertical position and press the steam trigger as required.

IMPORTANT: Place the iron base in contact with the fabric for cotton and

linen. Keep the iron base a few centimeters away for other more delicate

fabrics.

WARNING: Hot steam is emitted from the soleplate. Do not iron a garment

whilst wearing it. Do not operate steam in the direction of yourself or

anybody else.

Steam ironing

The smart features of the iron prevent you from creating steam in temperature

settings below ●●. This is to ensure that delicate fabrics are protected from

ironing with steam. It is recommended that for harder to iron fabrics such as

cotton and linen, steam should be used when ironing.

Warning: When ironing delicate fabrics like nylons, acrylics and

synthetics steam should never be used.

1. Fill the water tank with water.

2. Plug your steam generator into the mains supply and press the on (I) /off (O)

button to switch your steam generator on.

3. Rotate the temperature control dial to set the pointer to between the ●●

setting and the maximum heat (MAX) setting.

4. The temperature indicator light will pulse as your steam generator heats

up. When the temperature indicator light turns solid your steam generator

is ready to use.

ENGLISH

5. With the soleplate in contact with the garment, press the steam trigger for a

couple of seconds. It is not necessary to hold the trigger down continuously

as steam will still be emitted from the soleplate for a short time after the

trigger has been released. If more steam is required, press the steam trigger

again.

6. To operate the steam boost function, double-click the steam trigger quickly.

The iron will generate a highly concentrated steam boost for a short period

of time.

Always release the steam trigger and allow any residual steam to be released

before replacing the iron on its stand.

Caution: 1) Do not touch hot soleplate before cooling down!

2) Never direct the steam at people!

7. After ironing, press down the On/Off switch for a while and the appliance will

be turned off, all the indicators will be extinguished. Remove the plug from

the wall socket. But the soleplate is still hot, never touch it.

8. After cooling down, you can place the iron onto the thermal insulating

cushion.

Caution: During the operation or after ﬁnish ironing, never place the hot

soleplate on any area except the thermal insulating cushion.

Filling your steam generator

1. Remove the water tank by holding the handle and pulling the tank forwards

from the base station.

2. Slide the water tank out.

3. Fill the water tank with cold tap water to the MAX mark.

4. Slide the water tank back into the base unit until it latches securely into

place. You should hear an audible click.

Filling during use

You can ﬁll your steam generator during use. Simply remove the water tank as

described above and add water as required.

Do not ﬁll past the MAX indicator mark on the tank.

ΝΟΤΕ: the power indicator light will ﬂash to let you know that the water

tank needs ﬁlling.

ENGLISH

Self-cleaning

Only activate the self-clean when you want to activate the self-cleaning

system. Never activate the self-clean function when ironing.

The self-clean function removes scale and impurities. The steam generator

has an intelligent reminder cleaning mode which activates after continuous

steam ironing over a total of 25 hours. If you are in a hard water area you can

perform the cleaning cycle sooner than the allocated 25 hours by following the

steps below:

The cleaning indicator light will illuminate to remind users to clean the

machine.

1. Hold the iron horizontally over the sink.To activate the self-clean function,

adjust the temperature control knob to the Max setting. Press and hold the

self-clean button for 3 seconds. The clean indicator light will ﬂash, pull the

steam trigger once then remove hands from the handset, this will initiate the

cleaning function.

2. CAUTION: It is hot!!! Hot water and steam will be ejected from

the holes in the soleplate along with any impurities. During the

cleaning process there is no need to hold the product.

3. The cleaning cycle takes approximately 1 minute. When the clean indicator

light stops ﬂashing, the cleaning cycle is complete, and you can switch off

your unit and store when cooled.

4. To cancel the self-clean function, press and hold the self-clean button for 3

seconds. The clean indicator light will stop ﬂashing.

WARNING: Do not attempt to pick up the handset while the clean indicator

light is ﬂashing as hot water and steam may be ejected.

CLEANING AND MAINTENANCE

Before cleaning, ﬁrstly disconnect the power outlet and let the appliance cool

down.

1. Empty the boiler above a sink and rinse it a few times with clear water. Wipe

ﬂakes and any other deposits on the soleplate with a damp cloth or a non-

abrasive (liquid) cleaner.

NOTE: Do not use chemical, steel, wooden or abrasive cleaners to

scrape the soleplate.

ENGLISH

2. Clean the upper part of iron with a soft damp cloth. Wipe the water drop on

the steam generator and the thermal insulating cushion with dry cloth.

3. To not damage the soleplate, we advise you never to put the soleplate on

a metal surface. Clean your steam generator after every 10 times of use.

4. When do not use the appliance for a long time, pour out the water in the

tank, and store the iron on the thermal insulating cushion.

Type of water to use

• You can use normal tap water to ﬁll the tank. Therefore, especially if your

tap water is very hard, we advise you to mix it with distilled water or use

distilled water only. We advise you to empty the water tank after use.

Do not add anything to the contents of the boiler and do not use water

from clothes dryers, scented or softened water, water from refrigerators,

batteries, air conditioners and rain water. These contain organic waste

or mineral elements that become concentrated when heated and cause

brown staining or premature wear to the steam generator. Use of these

types of water will negate the guarantee provided with the product.

REDUCE LIMESCALE

• In order to improve the effectiveness of steam and prolong the boiler life

of your product, you can reduce the formation of limescale by using the

household descale for cleaning steam generators SINGER CALC OUT

(follow directions on the packaging).

• You can ﬁnd SINGER CALC OUT in authorized SINGER service centers.

IRONING TIPS

- Always check ﬁrst whether a label with ironing instructions is attached to

the article. Follow these ironing instructions in any case.

- The iron heats up quicker than cooling down; therefore, you should start

ironing the articles requiring the lowest temperature such as those made

of synthetic ﬁber.

- If the fabric consists of various kinds of ﬁbers, you must always select the

lowest ironing temperature to iron the composition of those ﬁbers.

- Silk and other fabrics that are shiny should be ironed on the inner side.

-Velvet and other textures that rapidly become shiny should be ironed in

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Singer Eisen Handbücher

Singer

Singer SGR-20420 Bedienungsanleitung

Singer

Singer 7-24 Bedienungsanleitung

Singer

Singer SGR-500LCD Bedienungsanleitung

Singer

Singer Steam care 170 LIMITED EDITION Bedienungsanleitung

Singer

Singer SG-2530C Bedienungsanleitung

Singer

Singer Household Steam Iron Bedienungsanleitung

Singer

Singer STI-1710-SSBW Bedienungsanleitung

Singer

Singer Perfect Steam Plus STI-2040 Bedienungsanleitung

Singer

Singer SGR-19400 Bedienungsanleitung

Singer

Singer SGR-17200-CRMG Bedienungsanleitung

Singer

Singer SNG 4.23 Bedienungsanleitung

Singer

Singer Steam Choice 1.0 Iron Bedienungsanleitung

Singer

Singer Sani Steam Care SGR-20430 Bedienungsanleitung

Singer

Singer SGR-17300-CRBS Bedienungsanleitung

Singer

Singer SG2428C Bedienungsanleitung

Singer

Singer SteamChoice 3.0 Bedienungsanleitung

Singer

Singer 92-6 Bedienungsanleitung

Singer

Singer Household Steam Iron Bedienungsanleitung

Singer

Singer SNG 1.10 Bedienungsanleitung

Singer

Singer Perfect Finish II Bedienungsanleitung

Singer

Singer SteamCraft Plus Bedienungsanleitung

Singer

Singer Comfort Steam Care Bedienungsanleitung

Singer

Singer SGR-17100-CRBS Bedienungsanleitung

Singer

Singer 220013096 Bedienungsanleitung

Beliebte Eisen Handbücher anderer Marken

Clatronic

Clatronic DB 3703 Bedienungsanleitung

TEFAL

TEFAL FV4093Z0 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 BS Bedienungsanleitung

Philips

Philips GC6012 Bedienungsanleitung

Bosch

Bosch 2 Series Bedienungsanleitung

Riffel

Riffel Catena KB-819 Bedienungsanleitung

Texi

Texi Hestia Bedienungsanleitung

Maxwell

Maxwell MW-3010 Bedienungsanleitung

TREVIDEA

TREVIDEA Girmi ST60 Bedienungsanleitung

Philips

Philips HI5914/30 Bedienungsanleitung

Primula

Primula Vapormat Bedienungsanleitung

Magio

Magio MG-541 Bedienungsanleitung

Scarlett

Scarlett SC-1334S Bedienungsanleitung

Bosch

Bosch Sensixx B22L Bedienungsanleitung

Philips

Philips GC651 Bedienungsanleitung

Vitek

Vitek VT-1247 VT Bedienungsanleitung

Cleanmaxx

Cleanmaxx 3397 Bedienungsanleitung

Philips

Philips GC800 Bedienungsanleitung