Singer SGR-500LCD Bedienungsanleitung
Refill steam generator
Refill σύστημα σιδερώματος ατμού
Ютия спарогенератор
SGR-500LCD
GB
INSTRUCTION MANUAL
GR
ΒΙΒΛΙΟ ΟΔΗΓΙΩΝ
BG
ИНСТРУКЦИИ ЗА ЕКСПЛОАТАЦИЯ
2
ENGLISH
IMPORTANT
For safety purpose you should read the instructions care-
fully before using the appliance for the first time. Save the
instructions for future reference.
The appliance is designed for domestic use and may only
be operated in accordance with these instructions for use.
The appliance generates high temperature steam. Always
handle with care and warn other users of potential danger.
DO’S
1. Check the mains voltage stated on the rating plate corre-
sponds to the local electricity supply.
2. Unwind and straighten the power cord and supply cord be-
fore use.
3. Place the appliance on a firm and steady surface.
4. The appliance must be used and rested on a stable surface
5. Avoid power cord or supply cord touches the sole plate.
6. The plug of the supply cord must be removed from the
socket-outlet before the water reservoir is filled with water
7. Keep electrical appliances out of reach from Children or in-
firm persons. Do not let them use the appliances without
supervision.
8. When placing the iron on its stand, ensure that the surface
on which the stand is placed is stable.
9. If the power cord or supply cord is damaged, the manufac-
turer or its service agent or similarly qualified person must
replace it in order to avoid a hazard.
10. Empty the water tank after use.
3
ENGLISH
11. Children shall not play with the appliance
12. This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the haz-
ards involved.
13. Keep the iron and its cord out of reach of children less than
8 years of age when it is energized or cooling down.
DO NOT’S
1. Do not allow children touch the appliance when ironing.
2. Do not leave the appliance unattended when it is connected
to a mains supply outlet.
3. Do not use an extension power cord set unless competent
authority has approved it.
4. Do not add perfumed, vinegar or other chemical liquids into
the water tank; they can damage the appliance seriously.
5. Do not immerse the appliance in water or any other liquid.
6. Do not use the appliance when it is damaged or performs
abnormally.
7. The appliance is not to be used if it has been dropped, if
there are visible signs of damage or if it is leaking.
8. Do not touch the iron rest during or just after ironing. It is
hot!
9. Do not roll the power cord or supply cord around the iron
unit or base console for storage until it has cooled down
completely.
10. Do not attempt to open the cabinet or dismantle any parts
from the appliance, there is no serviceable part inside.
4
ENGLISH
11. The filling aperture must not be opened during use. Instruc-
tions for the safe refilling of the water reservoir shall be giv-
en.
12. When cleaning, never unscrew the boiler cap whilst the
unit is pressed. Steam will shoot out and burn you. Always
switch off, unplug and leave overnight before commencing
to clean the boiler.
13. Do not allow children to perform cleaning and user mainte-
nance when they are without supervision.
14. Do not touch the surfaces marked with symbol during
or just after ironing. It is hot!
(Please refer to the following figure 1 and figure 2)
Figure 1: Left Side-Hot Surface
CAUTION: Hot surface!
5
ENGLISH
Figure 2: Right Side-Hot Surface
CAUTION: Hot surface!
6
ENGLISH
GET TO KNOW YOUR STEAM GENERATOR
1. Spray Knob
2. Steam Knob
3. Control Dial
4. Temperature Indicator
5. Pilot Light
6. Filling Cover
7. Water Tank
8. Cable storage clip
9. Power On/Off Button
10. Water Hardness Setting Button
11. Steam level button “- ”
12. Steam level button “+ ”
13. LCD screen
Control Panel
A. Steam Level
B. No Steam
C. Fill Indicator
D. Steam Chamber heat-up indicator
E. Auto Shut Off Indicator
F. Water hardness level indicator
G. Replace anti-cal cartridge
H. Anti-scale filter
7
ENGLISH
READ THE GARMENT LABELS AND FOLLOW THE MANUFACTURER’S
IRONING INSTRUCTIONS THAT ARE OFTEN SHOWN BY SYMBOLS SI-
MILIAR TO THE FOLLOWING.
Temperature control setting
Acetat
Elastane
Polyamide
Polypropylene
Polyester
Silk
Triacetate
Viscose
Cotton
Linen
HINT FOR IRONING
1. Sort out the articles to be ironed according to the type of fabric. This will
minimize the frequency of temperature adjustment for different garment.
2. Test ironing a small area on the backside or inside the garment if you are
unsure about the type of fabric. Start with a low temperature and increase
gradually.
3. Wait for 2 minutes before ironing heat sensitive fabrics. Temperature ad-
justment needs certain time to reach the required level no matter it is
higher or lower.
4. Delicate fabrics such as silk, wool, velour, etc. are best ironed with an
ironing cloth to prevent shine marks
OPERATING INFORMATION
The appliance has a high technology steam chamber, water is converted to
steam vapor in the chamber and transported to the iron unit through the sup-
ply cord.
8
ENGLISH
HOW TO FILL WATER
The appliance has an electronic system to monitoring the water level. When
the water level is lower than min level, the Fill Indicator will blink with
beep sound until the water is re-filled.
1. Disconnect the power cord from mains supply outlet.
2. Pull out the water tank water tank, see Fig 4
3. Open the water inlet cover
4. Fill water through the water inlet up to MAX level.
5. Replace the water tank in its place.
Due to the life cycle of anti-calcium resins and the water hardness, Suggest
replace the anti-cal cartridge when the indicator go blinking.
If new cartridge is unavailable you may use distilled water and continue operat-
ing the appliance.
FIRST TIME IRONING
1. Remove any protective films or sticker from the sole plate and the cabi-
net, if any.
2. Unwind and straighten the power cord and supply cord.
3. Fill the water tank with tap water. (See HOW TO FILL WATER)
4. Connect the appliance to a suitable mains supply outlet.
5. LCD will display a second then off with beep sound.
6. Press the power On/Off button
7. The min steam level and medium hard water level indicators will display
with a beep sound.
8. The Steam Chamber heat-up indicator will goes blinking which in-
dicate the steam chamber heating up. The warning beep sound will be
heard if press steam knob and steam will not release.
Fig. 4
9
ENGLISH
9. Select the max steam level by press the Steam level button “+ ”.
10. Turn the Temperature Dial on the Iron unit in clockwise direction to Maxi-
mum position, the Pilot Light will glows.
11. The Steam Chamber heat-up indicator will goes off when steam
chamber ready.
12. Pilot Light goes off when the required temperature for the iron unit is
reached.
13. The appliance is ready to use.
14. Depress the Steam Button for 1 minute to clean the steam generating
system.
15. Begin first time ironing with an old towel
Note:
1. The steam never come out until the steam generator reached the re-
quired temperature
2. It takes about one minutes to reach its required temperature.
DRY / STEAM IRONING
1. Unwind and straighten the power cord and
supply cord.
2. Fill the water tank with tap water. (See HOW
TO FILL WATER)
3. Connect the appliance to a suitable mains
supply outlet.
4. LCD will display a second then off with beep
sound.
5. Press the power On/Off button,
6. The min steam level and hard water level in-
dicator will display with a beep sound.
7. The Steam Chamber heat-up indicator will blink to indicate the
steam chamber is heating up. The warning beep sound will be heard if
press steam knob and steam will not release.
8. Turn the Temperature Dial in clockwise direction; select ‘·’ (dot 1), ‘··’
(dot2) or ‘···’ (dot 3) according to the recommendation of garment label.
9. Pilot Light glow until the required temperature for the iron unit is reached.
10. Select your required steam level by press the Steam level button “+ ” / “-”,
10
ENGLISH
Display Temperature Adjustment
min • •• ••• max
11. The Steam Chamber heat-up indicator will goes off when steam
chamber ready.
12. Pilot Light goes off when the required temperature for the iron unit is
reached.
13. The appliance is ready to use.
14. Press the Steam Button for steam ironing or ironing in dry mode.
15. Turn the Temperature Dial on the iron unit in anti-clockwise direction to
“Min” and the iron is switched off.
16. Press the Power On/Off switch, the base console will switch to “Off mode”
with a beep sound.
17. Disconnect the power cord from mains
supply outlet.
18. When the appliance gets cool complete-
ly, store it in a safe place. For the power
cord & steam supply cord storage see
the Fig 5
Fig. 5
Inhaltsverzeichnis
Sprachen:
Andere Singer Eisen Handbücher
Singer
Singer 92-6 Bedienungsanleitung
Singer
Singer Household Steam Iron Bedienungsanleitung
Singer
Singer SG-2530C Bedienungsanleitung
Singer
Singer Perfect Steam STI-2030 Bedienungsanleitung
Singer
Singer SG450R Bedienungsanleitung
Singer
Singer SG2428C Bedienungsanleitung
Singer
Singer SNG 5.22 Bedienungsanleitung
Singer
Singer SGR-18100 Bedienungsanleitung
Singer
Singer STI-1715 OCEAN Bedienungsanleitung
Singer
Singer COMPACT STEAM PRESS CSP1 Bedienungsanleitung
Singer
Singer SP 1000 Bedienungsanleitung
Singer
Singer STI-1710-SSBW Bedienungsanleitung
Singer
Singer SHG 2627 Bedienungsanleitung
Singer
Singer SteamLogic Bedienungsanleitung
Singer
Singer SG2030 Bedienungsanleitung
Singer
Singer STI-1740-CRBF Bedienungsanleitung
Singer
Singer 7-24 Bedienungsanleitung
Singer
Singer 580 ROTARY STEAM PRESS Bedienungsanleitung
Singer
Singer SG-2030S Bedienungsanleitung
Singer
Singer SSG 9000 Bedienungsanleitung
