Singsation Bravo Bedienungsanleitung
QUICK START
GUIDE
Instructions en français..................................... 10
Instrucciones en español....................................19
BRAVO
A L L -IN - O N E P A R T Y SY S T E M
2
Step 1: Unpack
Make sure the following items came in this package:
Singsation Bravo AC power adapter
2 Microphones
Step 2: Install battery in the remote
Remove the battery door from the back of the remote control.
Insert the provided AAA battery in the battery compartment. Make sure
you match the direction of the + and – markings in the compartment.
Put the battery door back on the remote and snap it into place.
POWER/PAIR
SND Fx Voice Fx
VOLUME
VOL
MODE
EQ
Light Fx Color
Dome Light
Remote
control
and
battery
3
Press and hold the POWER/
PAIR button on the front of the
Singsation Bravo (or on the remote)
to turn it on. The Bravo plays its
startup sound and the BLUETOOTH
indicator starts blinking slowly).
After 15–30 seconds, the Bravo
announces “Pairing” and goes to
Bluetooth pairing mode to set up
with your Bluetooth device. The
BLUETOOTH indicator starts blinking
faster.
Step 3: Plug in and charge
Step 4: Turn on
Before you start using the Singsation Bravo for the
first time, it’s a good idea to charge it completely.
To charge the Bravo: Attach one end of the AC
adapter to the DC 10V jack on the left side of
the Singsation Bravo. Plug the other end of the
adapter into a working outlet or surge protector.
The charging indicator is red while the speaker is
charging. It turns green when it’s fully charged.
Note: You can use the speaker while it’s charging.
To charge faster, turn o lighting eects and the
light dome.
Bravo, front
Bravo, left
Charging
indicator
4
Enable Bluetooth on your smartphone or other
Bluetooth device.
Step 5: Pair + Connect
Wi-Fi
Bluetooth
Bluetooth Settings
VPN Settings
Wi-Fi Settings
8:45PM
Make sure the BLUETOOTH indicator on the front
of the Singsation Bravo is blinking rapidly. (If it
isn’t, give a short double-press on the POWER/
PAIR button. The Bravo announces “Pairing.”)
If you’ve previously paired your phone or other Bluetooth device with
the Singsation Bravo, it will automatically attempt to reconnect to
that device when you switch it on. If you want to pair to a new device,
give a short double-press to the POWER/PAIR button. The Singsation
Bravo announces “Pairing” and the BLUETOOTH indicator starts
blinking.
Choose SINGSATION BRAVO from the pairing
options on your Bluetooth device. (If it’s not
in the list, choose “Scan” from your device’s
Bluetooth menu.)
The Bravo announces “Device Connected” when it’s finished pairing and
connecting to your Bluetooth device. The BLUETOOTH indicator turns solid
blue.
Note: The process of enabling Bluetooth and connecting varies from device to device. See your device’s owners
manual for more information and specific instructions.
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• Make sure there’s nothing plugged into the Singsation Bravo’s AUX IN jack when you’re
trying to use Bluetooth.
• The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters).
This range may vary, however, based on other factors, such as room layout, wall
material, obstacles, your device’s Bluetooth performance, etc. If you’re having problems
connecting to the speaker, move closer to it.
• If your device asks you for a password to connect, use “0000”.
Bravo, front
5
Step 6: Sing along!
The Singsation Bravo comes with 2 microphones you can use to sing along
or make announcements!
To sing along: Plug the provided microphones into the MIC 1 and MIC 2
jacks on the left side of the Singsation Bravo. Start playing music on your
Bluetooth device, move your mic’s switch to ON, and start singing!
To adjust the volume of your voice: Use the MIC VOLUME knob on the
front of the Bravo.
To adjust the volume of your music: Use the MUSIC VOLUME knob on the
front of the Bravo, or use the volume controls on your Bluetooth device.
To adjust the volume of everything: Use the MASTER VOLUME knob on
the front of the Bravo, or press VOLUME + or –on the remote.
Fun with Voice and Sound Eects
To use sound eects: Press the SOUND EFFECTS button on the Bravo or
the SND FX key on the remote. The Bravo’s display shows the name of the
eect as it plays. A single press plays the same eect again. Press and
hold the button or remote key to change eects.
To change voice eects: Turn the VOICE EFFECTS dial on the Bravo, or
press VOICE FX on the remote. The Bravo’s display tells you the name of the
current eect. Keep pressing or turning the dial to try all the eects!
Bravo, frontBravo, left
TOO QUIET?
Make sure the
volume of your
Bluetooth device is
turned all the way
up (or at least to
75%). Then turn up
the MUSIC VOLUME
and MASTER
VOLUME.
6
Using Dynamic Lighting
The FRONT COLOR,FRONT LIGHT FX, and LIGHT DOME buttons on the front
of the Bravo give you control over its built-in dynamic lighting, as do the same
buttons on the remote. Press the FRONT LIGHT FX button to cycle through
the multiple lighting modes for the front of the Bravo (see the table below for
reference). Press the LIGHT DOME button to cycle through the light modes for
the dome on top of the Bravo.
Chill: The light color gradually changes as it loops.
Breathe: The light loops in a single color. Press the LIGHT COLOR button on the
Bravo or remote to change colors.
Dance: The light pulses to the beat of your music. Press the LIGHT COLOR button
on the Bravo or remote to change colors.
Party: The light changes colors to the beat of the music.
Rave 1/2: The light loops clockwise/counterclockwise and changes colors.
Spin 1/2: The light loops clockwise/counterclockwise. Press the LIGHT COLOR
button on the Bravo or remote to change colors.
Multi-Color Chase 1–6: Multiple colors loop in six variations. Press FRONT LIGHT
FX to go through the variations.
Still: The light stays on in a single color. Press the LIGHT COLOR button on the
Bravo or remote to change color.
Single-Color Chase 1–6: A single color loops in six variations. Press FRONT LIGHT
FX to go through the variations.
Disco The ring light changes color every 10s.
Demo Mode
The Bravo has a demo mode that shows o all of its lighting options.
To activate/deactivate demo mode: Make sure the Bravo is on. Then press and hold the
LIGHT COLOR button for 10 seconds (until you hear 2 beeps).
Front
7
Tour of the Singsation Bravo
BLUETOOTH indicator shows the Bluetooth status of the Bravo (solid is
connected; fast flashing means pairing, and slow flashing means not connected).
This indicator turns solid white when AUX IN is connected.
POWER/PAIR button turns the Bravo on/o (press and hold) and puts it into
pairing mode (short double-press when the Bravo is on).
SOUND EFFECTS plays one of the available sound eects. Press once to play the
current eect. Press and hold to change eects.
EQ switches between the Bravo’s sound equalization settings.
LCD Display shows the name of the current voice eect. It also shows the name
of the sound eect as it plays.
MIC VOLUME dial adjusts the volume of the MIC 1 and MIC 2 microphones.
VOICE EFFECTS dial cycles through the available voice eects.
MASTER VOLUME dial adjusts the Bravo’s volume.
Bravo Front Panel
LCD Display
8
LIGHT DOME button controls the lighting eects of the Bravo’s top dome. Press
to cycle through the light dome modes. Press and hold to turn the light dome o.
FRONT LIGHT FX button controls the speaker’s front multi-mode lighting. Press
to cycle through the light modes. Press and hold to turn lighting o.
FRONT COLOR button changes the color of the front light in light modes where
you can select color.
MUSIC VOLUME dial adjusts the volume of the music playing.
Bravo Left Side Panel
MIC 1 and MIC 2 jacks let you connect up to two
microphones (including the provided mic) to use
with the speaker, for karaoke or announcements.
AUX IN jack lets you connect to an external audio device with a 3.5mm audio
cable. The speaker switches automatically to this input when you insert the
cable.
AUX OUT jack lets you connect to an external amplified speaker.
DC 10V connects to the provide power adapter.
9
Remote
POWER/PAIR button turns the Singsation Bravo o (press
and hold) and puts it into pairing mode (short double-press when
the Singsation Bravo is on).
IMPORTANT: To conserve the Bravo’s battery life, the main unit
turns on via the POWER/PAIR button on its front panel. The
remote control POWER/PAIR button does not turn the Bravo on,
only o.
SND FX button plays one of the available sound eects. Press
once to play the current eect. Press and hold to change eects.
VOICE FX button changes voice eects.
VOLUME + and — buttons increase/decrease the volume.
VOL MODE toggles volume control between master, music, and
mic control.
EQ button changes the Bravo’s EQ setting.
(mute) button mutes/unmutes all sound from the Bravo.
LIGHT FX button changes the Bravo’s front light eects.
COLOR button changes the color of the Bravo’s front light
eects.
DOME LIGHT changes the light eects of the Bravo’s dome.
POWER/PAIR
SND Fx Voice Fx
VOLUME
VOL
MODE
EQ
Light Fx Color
Dome Light
10
GUIDE DE
DÉMARRAGE
RAPIDE
English instructions..............................................1
Instrucciones en español....................................19
BRAVO
A L L -IN - O N E P A R T Y SY S T E M
SYSTÈME TOUT-EN-UN POUR LA FÊTE
Inhaltsverzeichnis
Sprachen:
