SINOPUREN OL403M Bedienungsanleitung
for Laminator
Models OL403M/OL303M
www.sinopuren.com
86 - 755 - 2832 1289
User Manual
Contace customer service at
Please be assured that we offer our
warranty and qtechnical support.
Do not return this product
to place of purchase.
Contents
Welcome / Registrtion Guide......................1
Know Your Laminator......................2
Specifications......................4
Laminating Guide......................3
Warnning......................5
Trouble Shooting Guide......................6
3 - Year Limited Warranty......................7
1
Thank you for choosing
to buy a Sinopuren machine
After registering your free 36 months warranty,
your Sinopuren machine will be covered for
parts and labor for 36 months from the date
of purchase, subject to the terms of the
warranty. If you have any questions about
your Sinopuren machine, contact us with your
serial number and details of where/ when you
bought the machine.
Most questions can be solved over the email
by one of our trained Sinopuren Helpline staff.
Your serial number can be found on your rating
plate which is on the base of the machine.
Alternatively, visit www.sinopuren.com/support for
online help, general tips and useful information
about Sinopuren.
Sinopuren customer care
NOTE: Normal Warranty is 12 months, but now,
you can UP TO 3 YEARS Warranty.
JUST need to REGISTER your products, and done
within 1 months after you purchased.
Easy to register your free 3 years warranty
Email
Send Serial and Order ID number to:
Also, If you get any questions for your item
or want to get After Sales Service just send
email to us, we will reply within 24hs.
Please do not return this product to
place of purchase, that was not
neccessary.
Please be assured that we offer our warranty
and technical support.
For Household Use Only
SAVE THESE INSTRUCTIONS
This illustration is for example purposes only.
Note your serial number for future reference.
Serial Number:
Serial Number:
Order ID:
2
Know Your Laminator
ABS
Laminator Pouch Exit
Lamvinator Pouch Entrance
Laminator Pouch Entrance
Cable StorageHeat sink holes Carrying Handle
345
Laminating Guide
Plug the unit in to the halls ocket. Make sure the reis enough space behind the laminator to allow the
pouch free passage through the machine. [fig. 1]
Connect to the power source, the machine will enter into auto-detect mode. All the LED indicators
will flash 1 time, and the buzzer will beep 1 time.
Press the power button [fig.2] to turn on the machine, Power LED indicator turns green, buzzer will beep
1 time [fig.3]. Motor will run in forward direction. The LED indicator in the laminating entrance turns red
and flashes. Machine is not ready for lamination at this moment. Machine will enter into cold lamination
mode after power on in 3 seconds as per the default setting. While the temperature is ready for cold
lamination, buzzer will beep twice and the LED indicator in the laminating entrance will turn green.
Go ahead with the lamination.
will turn green and the buzzer will beep 1 time, LED indicator in the laminating entrance turns red and
flashes, machine starts to heat up. Lamination will be ready to go in 4-6 minutes after the machine
reaches the required temperature. In the ready mode, buzzer will beep twice and the LED indicator
in the entrance will turn green.
• If pouch film jam or other abnormal cases happened, press and hold the manual reverse button to
pull out the pouch from the entrance. Release the reverse button to get back to normal laminating
status. Repeat step 3 to go on the lamination.
• Press the power button again to turn off the machine. All the LED indicators will turn off. Machine stops
to heat up and motor stops to run.
• Machine will enter into sleep mode after 30 minutes inactivity while power on by 3 beep sound
after the buzzer gives a beep sound.
Installation
Operation
3
Specifications
Attention things
Important Safety Instructions
Attention: Check that the voltage specifications of the
machine correspond to that of your power supply
network (120 V, 60 Hz).
Note: To prevent the laminating foil from creasing,
never feed the open side of the foil pocket first in the
insertion slot of the laminator. The laminating process
occurs automatically.
Note: To flatten the laminated product, place a book
or similar heavy, flat object,on it.
Attention: If you have just finished using the laminator for
hot laminating, you must let the laminator cool down.
The cool down phase can take up to 30 minutes.
120V
30 minutes
OL403M
Laminating system:
Maximum foil thickness:
Hot roller technology
COLD/3/4/5mil ( 75 -100 - 125 micron)
Laminating speed: 400 mm/min
Power supply: 120 Volt, 60 Hz
Working width: 230 mm (A4)
Power consumption: 700 W
Dimensions (LxWxH): 367 x 162 x 75 mm
Weight: Approx. 1.5 kg
340 mm (A3)
800 W
467 x 162 x 75 mm
Approx. 1.86 kg
OL303M
4
Warnning
Important Safety Instructions
NO PAPER CLIPS
KEEP AWAY FROM CHILREN
NEVER OPEN THE UNIT
Carefully read this operation manual before
operating the unit.
Never attempt to open and service the unit. There
are no user serviceable parts inside the laminator.
Repairs must be done by authorized personnel.
Unauthorized servicing of the unit will render the
warranty invalid.
Use only the pouches with the right thickness and
size. Pouches that are too thin will easily be caught
and result in documnet jams.
Never laminate heat sensitive material such as
thermal fax paper.
Machine surface is hot during operation. Children
operating the machine must be supervised by adults.
Never laminate over stanples or paper clips.
1.
2.
3.
4.
5.
6.
7.
5
1. Do not use empty
film to laminate
2. Feed pouches from
the front, closed
end first
3. Pay attention to the
position of alignment
parallel placement
not put crooked
4.Please choose the
right size of pouches
5.Do not connect
the pouches to
use
6.Do not cut open the
pouches to use
7.Do not use the
deformed pouches
8.No oversized photos
Trouble Shooting Guide
Troubleshooting
Fault Corrective measures
LED does not light up
Device does not respond
Check that the power cable has been correctly
plugged into the power socket and that the
On/Off button is on.
If the fault cannot be cleared, please contact
the sales outlet where you purchased the device.
Paper jam Check the pouches being used are the
correct size.
Only use pouches of the sizes prescribed.
Ensure that the pouches has been inserted
correctly in the unit.
To clear the fault, follow the instructions in the
Section "Clearing Foil Jams".
Laminated is not
completel transparent
Laminate the same pouche again to improve the
lamination result.
Conformity of the equipment to the
EU directives is confirmed by the
CE symbol.
Disposal
This symbol (crossed out waste bin) indicates that the product must be
returned to an authorised recycling centre or collection point when it
has reached the end of its service life. The symbol only applies to states
within the EEA. EEA = European Economic Area, which is comprised of
the member states of the EU plus Norway, Island and Liechtenstein.
6
3 - Year Limited Warranty
After registered your item(s), Sinopuren Inc. warrants that for a period of 3 years from the date
of purchase, this product will be free from defects in material and workmanship. at its option,
will repair or replace this product or any component of the product found to be defective
during the warranty period. Replacement will be made with a new or remanufactured
product or component. If the product is no longer available, replacement may be made
with a similar product of equal or greater value. This is your exclusive warranty. Do NOT
attempt to repair or adjust any electrical or mechanical functions on this product. Doing so
will void this warranty.
This warranty is valid for the original retail purchaser from the date of initial retail purchase and
is nottransferable. Keep the original sales receipt. Proof of purchase is required to obtain
warranty performance. Sinopuren dealers, service centers, or retail stores selling Sinopuren
products do not have the right to alter, modify or any way change the terms and conditions
of this warranty.This warranty does not cover normal wear of parts or damage resulting from
any of the following: negligentuse or misuse of the product, use on improper voltage or
current, use contrary to the operating instructions,disassembly, repair or alteration by anyone
other than Sinopuren or an authorized Sinopuren service center. Further, the warranty does
not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.
Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty lasts, so the above
limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary from
province to province, state to state or jurisdiction to jurisdiction.
How to Obtain Warranty Service
All countries
If you have any question regarding this warranty or would like to obtain warranty service,
please send email to [email protected] and our service dept. will be reply you in 24h.
PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF
PURCHASE
7
8
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere SINOPUREN Laminiergerät Handbücher
