Sirit IDENTITY 5100 Bedienungsanleitung

IDentity 5100

SER’s

UIDE

V1.03

January 10, 2008

Disclaimer and Limitation of Liability

The content of this manual is for information use only and is subject to change without notice. Sirit assumes no responsibility or liability for

any errors or inaccuracies that may appear in this publication. No part of this manual may be reproduced in any form or by any means,

electronic, mechanical, recording, or otherwise, without the prior written permission of Sirit.

Sirit products are not designed, intended, authorized or warranted to be suitable for life support applications or any other life critical

applications which could involve potential risk of death, personal injury, property damage, or environmental damage.

About Sirit

Sirit Technologies designs, develops, manufactures and sells Radio Frequency Identification (RFID) technology. Targeted at a diverse set of

markets RFID technology has become a core technology for applications including: electronic toll collection, access control, cashless

payment systems, product identification, and supply chain management systems including logistics, warehousing and manufacturing, and

asset management.

Head Office - Canada

372 Bay Street, Suite 1100

Toronto, Ontario, M5H 2W9 Canada

Tel: 416.367.1897

Fax: 416.367.1435

Toll Free: 1.800.498.8760

Email: [email protected]

Sirit Technologies - US

1321 Valwood Parkway, Suite 620

Carrollton, Texas 75006 United States

Tel: 972.243.7208

Fax: 972.243.8034

Toll Free: 1.866.338.9586

Web: www.sirit.com

Preface

IDentity 5100 User’s Guide

Preface

Intended audience

This document is intended for professional installers setting up and

installing the IDentity 5100 Radio Frequency Identification system. Before

attempting to install, configure, and operate this product, you should be

familiar with the following:

hMicrosoft®Windows®based software installation and operation

hDevice communication parameters including Ethernet and serial

communications

hRFID reader configuration including antenna placement

hBasic digital input/output control

What’s in this guide

The information in this guide is presented as follows:

Reader Overview – This chapter provides a brief overview of the IDentity

5100 hardware and software.

Reader Equipment Installation – This chapter describes how to

mechanically and electrically install the reader.

Reader Startup Tool (RST) Software Installation – This chapter describes

how to install the Microsoft Windows based RST application.

Reader Operation – This chapter describes how to initially test a reader and

how to operate deployed readers.

Reader Startup Tool (RST) – This chapter describes the RST and the various

functions you can perform with this Microsoft Windows based application.

Embedded Reader Configuration Tool (RCT) – This chapter describes the

RCT and the various functions you can perform with this embedded reader

application.

Configuring Digital Inputs and Outputs – This chapter describes how to

setup the reader’s digital inputs and outputs.

Specifications – This chapter detailed mechanical, electrical, and

environmental specifications for the IDentity 5100.

Safety Instructions – This chapter provides important safety information

about the IDentity 5100. All users must read this section before installing or

operating this reader.

Preface

IDentity 5100 User’s Guide

What’s New in this Version

Version 1.0 is the initial release of this document.

Conventions used in this manual

The following conventions are used in this manual:

Bold courier font indicates code entered by the user

(values) within parentheses indicate parameters

(values)

in italics indicate user defined variables.

<n> indicates a variable number used in a function that can apply to

several different devices such as antennas or I/O ports.

WARNING:

Warnings advise the reader that a hazardous condition can be created by a

particular action that can cause bodily injury or extreme damage to equipment

ATTENTION:

This warning indicates that the device is susceptible to Electro Static

Discharge and appropriate precautions must be taken to avoid

equipment damage.

Caution:

Cautions advise the reader that a condition can be created by a particular action

that can cause equipment damage or result in equipment operation that violates

regulatory requirements.

NOTES

Important information

and other tips are

presented in light

blue boxes to the left

of the applicable

section.

Contents

IDentity 5100 User’s Guide

iii

Table of Contents

Chapter 1 – Reader Overview..................................................................................................................1

Reader Hardware...................................................................................................................................1

Reader Software....................................................................................................................................2

Chapter 2 – Reader Equipment Installation ..........................................................................................3

Mechanical Installation.........................................................................................................................3

Mounting the Reader.........................................................................................................................3

Electrical Installation.........................................................................................................................5

Connecting the Serial Port.................................................................................................................6

Connecting and Configuring the Ethernet Port.................................................................................6

Connecting the External Antenna .....................................................................................................7

Connecting Digital Inputs/Outputs....................................................................................................7

Connecting the Power .......................................................................................................................7

Chapter 3 – Reader Startup Tool (RST) Software Installation.............................................................8

Installing RST Software........................................................................................................................8

Reader Startup.....................................................................................................................................10

Initial Reader Setup.............................................................................................................................11

Chapter 4 – Reader Operation...............................................................................................................14

Basic Operation with RST...................................................................................................................14

Deployed Reader Operation with RCT...............................................................................................16

Chapter 5 – Reader Startup Tool (RST).................................................................................................18

View Readers on the Network ............................................................................................................18

Configure Reader with the Setup Wizard ...........................................................................................19

View or Change the Reader’s Network Settings.................................................................................20

Reader Test Tool (RTT)......................................................................................................................21

General Page ...................................................................................................................................21

Tag Performance Page ....................................................................................................................22

Tag Management Page....................................................................................................................24

Macros Page....................................................................................................................................25

Event Handling Page.......................................................................................................................27

Reader Diagnostics Tool (RDT) .........................................................................................................28

Channel Statistics............................................................................................................................28

Alarms.............................................................................................................................................29

Tag Report.......................................................................................................................................30

Spectrum Analyzer..........................................................................................................................31

Contents

IDentity 5100 User’s Guide

Chapter 6 – Embedded Reader Configuration Tool (RCT)..................................................................32

Basic Configuration ............................................................................................................................33

Configuration Page Header.............................................................................................................33

Manage Profiles ..............................................................................................................................34

Set Tag Protocol..............................................................................................................................35

Setup Ethernet/LAN........................................................................................................................36

Setup Serial Port..............................................................................................................................37

Setup Digital Accessories ...............................................................................................................38

Setup Antenna/Cables.....................................................................................................................39

Set Regulatory Mode (Region) .......................................................................................................40

Advanced Functions............................................................................................................................41

Firmware Management ...................................................................................................................41

Import/Export Configuration (Upload/Download).........................................................................42

Command Line................................................................................................................................43

Expert Configuration...........................................................................................................................44

Expert Configuration – Setup .........................................................................................................44

Expert Configuration – Tag ............................................................................................................45

Expert Configuration – Version......................................................................................................46

Expert Configuration – Information ...............................................................................................46

Expert Configuration – Communication.........................................................................................47

Expert Configuration – Antennas....................................................................................................48

Expert Configuration – Digital I/O.................................................................................................49

Expert Configuration – Modem......................................................................................................50

User Application Management ...........................................................................................................51

Change Operating Mode.....................................................................................................................52

View Tags ...........................................................................................................................................53

Check Reader Status ...........................................................................................................................54

Review Logs .......................................................................................................................................54

Chapter 7 – Configuring Digital Inputs and Outputs...........................................................................55

Digital Inputs.......................................................................................................................................55

Digital Outputs....................................................................................................................................55

Digital I/O Monitoring and Control Scripts........................................................................................55

Digital Input Alarm Generation..........................................................................................................58

Digital I/O Hardware Connection.......................................................................................................59

Contents

IDentity 5100 User’s Guide

Chapter 8 – Specifications.....................................................................................................................60

Reader Specifications..........................................................................................................................60

Environmental Specifications .............................................................................................................61

Battery Specifications (Optional)........................................................................................................61

Power Supply Specifications...............................................................................................................61

RS-232 Specifications.........................................................................................................................62

Ethernet LAN Specifications ..............................................................................................................62

Antenna Cable Specifications .............................................................................................................62

Internal Antenna Specifications ..........................................................................................................63

External Antenna Specifications.........................................................................................................63

Bulkhead Connector/Interface Cable Pinout.......................................................................................64

Chapter 9 – Safety Instructions.............................................................................................................65

Power Disconnect Device ...................................................................................................................65

RF Safety.............................................................................................................................................65

Electrostatic Discharge........................................................................................................................66

Regulatory Compliance.......................................................................................................................66

Contents

IDentity 5100 User’s Guide

2 3 4 5 6 7 8 9

Reader Overview

IDentity 5100 User’s Guide

Reader Overview

Reader Hardware

The IDentity 5100 is a multi-protocol, multi-regional Radio Frequency

Identification (RFID) System that operates in the 860 – 960 MHz UHF band.

The reader is configured at the factory to operate within a specific

regulatory region (for example: FCC in the 902-928 MHz ISM band).

Figure 1

IDentity 5100 UHF Reader with Universal Mount

As shown in the following figure, the IDentity 5100 reader contains one

integrated antenna and supports one additional Tx/Rx antenna. The reader

is equipped with both RS-232 serial and Ethernet interfaces.

Figure 2

IDentity 5100 Power and I/O Connections

2 3 4 5 6 7 8 9

Reader Overview

IDentity 5100 User’s Guide

Reader Software

The IDentity 5100 is shipped with two software applications that you can

use to configure and control the reader.

Reader Startup Tool (RST)

The RST is a Microsoft Windows based application you install on your

computer. With RST, you can view all readers on your network. After

selecting a reader, you can modify its communication, network, and

operational parameters. You can also read tags, review tag data, perform

diagnostics, and upload new software. This RST is primarily intended for

initially configuring a reader prior to deployment. After deployment, use the

Embedded Reader Configuration Tool (RCT). Detailed information on the

RST is provided in Chapter 5.

Embedded Reader Configuration Tool (RCT)

This RCT is an embedded reader application that allows you to access your

readers across a LAN or WAN. Enter the IP address of the reader into your

Web browser and the RCT allows you to fully modify and operate the reader.

With the same functionality as the RST, this application allows you to modify

the reader’s communication, network, and operational parameters. You can

also read tags, review tag data, perform diagnostics, and upload new

software. This application is primarily intended for configuring and

managing deployed readers. Detailed information on the RCT is provided in

Chapter 6.

Inhaltsverzeichnis

Andere Sirit RFID-System Handbücher

Sirit

Sirit IDentity Flex Bedienungsanleitung

Sirit

Sirit IDentity 6204 Bedienungsanleitung

Beliebte RFID-System Handbücher anderer Marken

Chainway

Chainway R1 Bedienungsanleitung

IFM

IFM DTC600 Bedienungsanleitung

Elatec

Elatec TWN4 MULTITECH NANO LEGIC 63 M Bedienungsanleitung

RHOMBUS

RHOMBUS DR20 Bedienungsanleitung

SOREX

SOREX FLEX Bedienungsanleitung

Omron

Omron V780-HMD68-EIP-KR Bedienungsanleitung

IDENTEC SOLUTIONS

IDENTEC SOLUTIONS iPOINT Si Gebrauchsanweisung

Shuttle

Shuttle BR06 Gebrauchsanweisung

Digilock

Digilock Curve Keypad Basic Bedienungsanleitung

Atid

Atid AT870 Bedienungsanleitung

Chacon

Chacon 34958 Bedienungsanleitung

Paxton

Paxton PROXIMITY architectural reader Bedienungsanleitung

CipherLab

CipherLab 1800 series Bedienungsanleitung

Brady

Brady FR22 Bedienungsanleitung

Kronotech

Kronotech BLUEBOX GEN2 M30 UHF Bedienungsanleitung

Unitech

Unitech RH767 Bedienungsanleitung

Honeywell

Honeywell 026366.00 Bedienungsanleitung

Elatec

Elatec TCPConv Bedienungsanleitung