Sirius Satellite Radio SIRIUS Satellite Music for Your Business... Originalbetriebsanleitung

Business Equipment Package

Owner's Manual and Installation Instructions

Satellite Music for Your Business

727.531.3105 727.531.3965

[email protected] www.amtc.com

)

4091 AMTC Center Drive Clearwater, Florida 33764.6976

Applied Media Technologies Corporation

Limited Warranty

Applied Media Technologies Corporation ("AMTC") warrants this product against defective material and workmanship for a period of one

year from the date of purchase. Except as specified below, this warranty covers parts and labor. The following are not covered by this

warranty:

1. Damage, deterioration, malfunction or failure to meet performance specifications resulting from:

a) Accident, acts of nature, misuse, abuse, neglect or unauthorized product modification.

b) Improper installation, removal or maintenence, or failure to follow the instructions contained in the manual.

c) Repair or attempted repair by anyone other than AMTC.

d) Any shipment of this product (claims must be presented to the carrier).

e) Any cause other than a product defect.

2. Cleaning, initial setup, check-ups with no defects found, or charges incurred for installation, removal or reinstallation of the product.

3. Any product on which the serial number has been defaced, modified or removed.

4. Accessories, including but not limited to, cables, mounting shelves or stands, detachable power cords, and timer units.

5. Any product purchased outside the U.S.A., its possessions or territories.

6. Compatibility of this product with any particular interface.

This warranty may be enforced only by the original purchaser. In the event this product needs service, contact AMTC at 1.800.741. AMTC

(2682). We will advise you of proper procedure. Please do not return the product to AMTC without prior authorization. Whenever warranty

service is required, you may be required to present original proof of purchase.

All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to the length of this

warranty. Liability for any defect is limited to repair or replacement of this product at the option of AMTC. AMTC shall not be liable for

damage to other products caused by defects in this product, damages based on inconvenience or loss of use of this product, or any other

damages, whether incidental, consequential or otherwise.

Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you

may also have other rights which vary from state to state. This warranty is enforceable only inside the U.S.A., its possessions and territories.

FCC Warning:

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference

unless the modifications are expressly approved in this user guide. The user could lose authority to operate the equipment if an unautho-

rized change or modification is made.

This equipment has been tested and found to comply with Part 15 of the FCC rules. These rules are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications

if it is not installed and used in accordance with these instructions. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the unit on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult AMTC for further technical assistance.

Check Package Contents:

Receiver (Model EQ-SIRRCV) - Box includes:

Receiver

Mounting Bracket (2 pieces)

120VAC to 12VDC 1.2A wall adapter

6-ft.stereo audio cable with 3.5mm stereo plug and dual RCA plugs

25cm dual RCA female to single RCA male (stereo to mono) adapter cable

RCA female to 1/4" male mono adapter

Earbuds

Commercial antenna (Model EQ-SIRANT)

100 ft. low-loss commercial coaxial antenna cable (Model EQ-SIRCBL)

Placement and Mounting of the Antenna

You will need the following to complete the installation:

• electric drill

• 3/8” drill bit suitable for the construction material used in the exterior walls of your building (e.g.; masonry, metal, wood, etc.)

• (4) 3/16” fasteners suitable for the construction material used in the exterior walls of your building

• driver bit for selected fasteners

• caulk

1. Determine antenna mounting location. The best location for your antenna is on the roof of your building. If this is inconvenient,

acceptable reception may often be achieved by mounting the antenna on an exterior sidewall. Due to the unique paths of the SIRIUS

satellites, the proper sidewall will depend on where you are located. Please reference the following chart to identify the optimum antenna

placement:

Area 1: Place the antenna at an EAST-FACING sidewall.

Area 2: Sidewall mounting not recommended. Antenna should be mounted on roof away from any obstructions.

Area 3: Place the antenna at a WEST-FACING sidewall.

Area 4: Place the antenna at a NORTH or EAST-FACING sidewall.

Area 5: Place the antenna at a NORTH-FACING sidewall.

Area 6: Place the antenna at a WEST or NORTH-FACING sidewall.

Remember that SIRIUS Satellite Radio is a LINE OF SIGHT technology. There must be a clear view from the antenna to the satellite, with no

blockage by surrounding buildings, dense trees, etc.

As an alternative to mounting the antenna to a flat surface using fasteners, the antenna is designed to easily mount to an existing 1 3/4”

diameter antenna mast. Pole clamps are provided for this purpose.

NOTE: Do not permanently attach your antenna immediately. Because the SIRIUS satellites orbit over the United States, it is possible that

an antenna placement that achieves good signal strength at one time of day will not maintain good signal strength at other times of the day.

Monitor signal strength for at least one full day before making your antenna placement permanent.

2. Uncoil the 100 ft. low-loss coaxial antenna cable and attach to the connector on the underside of the antenna using the THREADED plug.

IMPORTANT!: When “pulling” the cable, DO NOT GRAB/PULL BY THE CONNECTORS! Pull /grab the cable itself. Failure to heed this

warning could result in the connectors pulling off the cable!

3. Drill a hole 3/8” in diameter in the building exterior to allow the antenna cable to be routed into the building. Once the excess cable is

pulled inside the building, caulk around the cable to create a water-tight seal.

4. Plug the NON-THREADED connector on the antenna cable into the receptacle labeled ANTENNA on the upper right end of the receiver. If

you must increase the distance between the antenna and the receiver, we stock 50-foot amplified extension cables (AMTC P/N EQ-SIR50X)

for $39.95 (+ $5.00 S/H). Up to two of these may be daisy-chained together for a total extension of 100 feet. IMPORTANT!: To unplug

the antenna cable, grab the CONNECTOR and pull firmly. DO NOT PULL BY THE CABLE! Failure to heed this warning could cause the

connector to become detached from the cable.

Positioning the Receiver and Connecting to Your Amplifier

The receiver should typically be positioned as close as possible to the amplifier into which it will be connected. The provided audio cable is

6 feet long. If you prefer to position your receiver further than 6 ft. from your amplifier, we stock inexpensive 25-foot audio extension

cables, as well as couplers to "daisy-chain" the extension cables. Our labs have tested daisy-chaining four extension cables, for a length of

100 feet, with no noticeable loss of signal. Call AMTC at 800-741-AMTC(2682) for further information or to order.

Connect the 3.5mm stereo plug on the provided audio cable to the receptacle labeled “AUDIO OUT” on the lower right end of the receiver.

3.5mm stereo plug

If your amplifier is stereo:

Connect the dual RCA plugs of the provided audio cable into the L and R auxiliary inputs of your amplifier. Do NOT connect to the

PHONO input.

dual RCA plugs

If your amplifier is mono:

Connect the dual RCA plugs of the provided cable into the dual jacks of the provided 25cm dual RCA female to single RCA male (stereo to

mono) adapter cable:

25cm dual RCA female to single RCA male (stereo to mono) adapter cable

Connect the single RCA plug into the RCA input jack of your amplifier. If your amplifier has a 1/4” input jack, use the provided RCA female

to 1/4" male mono adapter:

RCA female to 1/4" male mono adapter

Connecting Power

A 12VDC 1.2A power adapter is provided with the receiver. The adapter should be plugged into the jack labeled “DC12V” on the upper left

end of the receiver, and into 110-120 VAC wall power. Avoid using a circuit also powering any heavy equipment or appliances, particularly

air conditioners or refrigeration equipment. We highly recommend that you use a quality surge protection device to protect your receiver.

1. Button: Turns receiver on and off.

2. Channel Switch (CHAN) & Select Button: Navigates through channels & display screens and makes selections of

items highlighted on the display. Pressing up increases or moves up in the menus. Pressing down decreases or

moves down in the menus. Pressing in duplicates the function of the Select button.

3. < > Buttons: Navigates through Category List Screen which displays SIRIUS Channel Categories.

4. Display Button: Toggles display between category/channel name and time/date.

5. Menu Button: Used to access menu options to make setup and feature changes.

6. Select Button: Selects an option on the screen.

7. Preset Number Buttons (0-6): Sets and selects preset channels.

8. Memory (MEMO) Button (S-Seek Function): Saves and recalls artist names and song titles. You can store up to

20 artist/song title combinations.

9. Band Button (P.Tune): Pressing and releasing switches between the five preset banks (A... E), which hold six

presets each. Pressing and holding enables “Preset Tune Mode”, which allows for viewing and listening of stored

presets with the Channel Switch.

10. Remote Control Receiver: Receives signals from wireless remote control (sold separately).

11. DC 12V: Input jack for cigarette lighter adapter or 12V DC power supply.

12. FM OUT: FM Output for use with wired FM switch box accessory (sold separately).

13. ANTENNA: Input jack for SIRIUS antenna.

14. VOL: Volume control for audio out jack.

15. AUDIO OUT: Audio line output or headphone jack.

Receiver Controls and Features

Activating your SIRIUS Satellite Music for Your Business Subscription

Turn the receiver on by pressing the button. If the receiver is installed incorrectly, it may read “ANTENNA ERROR”. If this happens,

unplug power from the receiver and double check the antenna cable connections. If the error message continues after verifying good cable

connections, this may indicate poor antenna placement. Please revisit “Placement and Mounting of Your Antenna” on Page 3. For

assistance, call AMTC Technical Support at 800-741-AMTC(2682) between the hours of 9am to 5pm EST. If the receiver is installed

correctly, it will automatically receive the SIRIUS Satellite Radio signal. You will see on the display “UPDATING CHANNELS” (0%, 20%, 40%,

60%, 80%, 100%). During this process, please do not press any buttons. Once the channels are updated, the screen will change to the

PREVIEW Channel 184. On this channel, you will see the message “Call 1-888-539-SIRIUS to Subscribe.” DO NOT CALL THIS NUMBER -

THIS NUMBER IS NOT FOR BUSINESS SUBSCRIPTIONS! Call AMTC at 800-741-AMTC(2682).

When you call, you will need the SIRIUS ESN for your receiver. Press the MENU button to enter the “Menu Options” mode. The “SIRIUS ID”

menu option will now be highlighted. Push the Select button to select “SIRIUS ID”. This will display your receiver’s unique 12-digit SIRIUS

ESN. The ESN should also be available on a label on the back of the receiver (look for a bar code with a number underneath starting with the

letters ESN), as well as on the receiver packaging. Write the ESN down in the space provided at the end of this manual.

Basic Operation

Within a few hours from the time you call us to activate your SIRIUS Satellite Music for Your Business subscription, your receiver will be

activated via satellite and will then be able to receive any of the 65 commercial-free SIRIUS music channels (or a few less if you have

selected the “Restricted” programming option). In order for activation to occur, your receiver must be left ON. Once activated, the Normal

Operation (Default) screen will appear (Below):

Selecting Channels

Use the Channel Switch (CHAN) to select channels. Pressing the Channel Switch up will increase or move up to the next channel. Pressing

the Channel Switch down will decrease or move to the previous channel. The selected channel will automatically start playing after a few

seconds. You may also select the highlighted channel by pressing the Channel Switch in or pressing the SELECT button. The name and artist

of the currently playing song will scroll across the display.

Display Button

Pressing the DISPLAY button from the Default display toggles the top line of the display between the channel name & time and the category

& date.

Pressing and holding the DISPLAY button for 3 seconds will enter Channel List mode, described in the next section.

Search Modes (Category, Channel, Artist, Song Title)

The receiver has several ways to search for and select music: by channel, by category, by artist and by song title.

Searching Channels

If you want to find a different channel to listen to, press and hold the DISPLAY button to enter Channel List mode:

1. Use the CATEGORY buttons to scroll through music and entertainment categories.

2. Use the Channel Switch to scroll through the available channels in each category.

3. When the channel you want is highlighted, press SELECT to tune to it. The channel will change and the display will revert to the Default

screen for the new channel.

• Pressing the DISPLAY button while in the Channel List Mode will change between Channel Name, Artist Name and Song Title to preview

what is playing on other channels before selecting.

To exit this mode without changing to a new channel, press and hold the DISPLAY button for 1 second.

Setting Channel Presets

You can store up to 30 of your favorite channels as presets, for quick access. Presets are stored in 5 banks, each containing 6 channel

presets.

1. Press the BAND button to activate the preset bank you want. The selected bank is shown in the top right corner of the Default screen.

2. Select the channel you want to preset (see the Basic Operation and Changing Channels section).

3. Hold the numbered preset button you want to store the channel in for at least 2 seconds.

• You will hear a beep and “Preset Stored” will flash to indicate that the channel has been memorized.

• If the preset button already has a channel stored in it, it will be replaced by the new channel.

Recalling Channel Presets

The 6 presets in the active bank (A - E) can be selected by pressing the “0” – “6” buttons.

1. Press the BAND button to activate the preset bank you want. The selected bank is shown in the top right corner of the Default screen.

2. Press the desired preset button to recall the preset. The channel will change and the display will revert to the Default screen for the new

channel.

Searching for a Channel Preset (P.TUNE Mode)

It is possible to quickly search through all of your presets using the Channel Switch.

1. Press and hold the BAND button to enter the Preset Tune Mode (P.TUNE).

2. “Preset Tuning Mode” will be displayed and the top corners of the display will invert to indicate Preset Tune Mode.

3. Use the Channel Switch to move up or down through your presets. Only channels stored in your presets will be displayed, regardless of

which bank they are stored in.

• Presets will be grouped and displayed by preset bank and number (ex. A-1, A-2...B-1, B-2) and rotate back to the beginning.

To exit Preset Tune Mode and return to Channel Tuning Mode, press and hold the BAND button.

Preset Tune List Mode

In the Preset Tuning Mode you can view your list of presets showing Channel Name, Artist Name, or Song Title just like in the Channel List

Mode:

1. Press and hold the BAND button to enter the Preset

Tune Mode (P.TUNE).

2. Press the DISP button for 2-seconds which will bring up the Preset Tune List Mode displaying up to 3 preset channel names.

• Pressing the DISP button while in this mode will change between Channel Name, Artist Name and Song Title list modes.

• The name field will scroll only if the length of the artist or song title cannot be viewed in its entirety.

3. Use the Channel Switch to select the desired preset.

4. Push SELECT to select the channel. The channelwill change and the display will revert to the P.TUNE Display.

Memory (MEMO) and Song Seek (S-Seek) Functions:

This feature allows the user to capture and store information about the programming (Artist/Song, sports team or traffic city) on the

currently tuned channel, up to a total of 10 listings. The receiver also has the capability to continuously search all incoming SIRIUS channels

and alert the user when a saved program is being played.

Storing Song Titles

1. While the Receiver is in the Default display mode, momentarily pressing and releasing the MEMO button stores the current program data

information within the Receiver’s memory. A memory “Stored” pop-up screen, followed by “X Used/Y Empty” will each appear for 1 second

(below).

2. If the MEMO button is pressed and all of the memory spaces are full, S-Seek Full will flash on the display for 1 second, followed by a pop-

up screen presenting the Replace-Cancel options. This prompt allows you to make the following Replace/Cancel choices:

• By selecting Replace, the memory list will appear, and you can use the Channel Switch to select the data that you would like to overwrite

with the new Artist/Song Title. After highlighting the selected title in the list, press SELECT to delete the stored Artist/Song Title and

replace it with the updated information. The display will show the “Stored” screen.

• By selecting Cancel, the prompt screen will disappear and revert to the original screen. Nothing will be stored.

Viewing Program Information stored in Memory

1. Press and hold the MEMO button for 3 seconds to enter S-Seek Mode. The program information stored in memory will be displayed one-

at-a-time in page format.

2. Use the Channel Switch to scroll through the listings. This function allows you to review previously stored program information.

Deleting a Song Title Stored into Memory

1. Press SELECT while in S-Seek Mode. A pop-up screen displaying two selectable options - “Delete” and “S-Seek” - is displayed.

2. Use the Channel Switch to highlight the “Delete” option.

3. Press SELECT and a Delete confirmation screen will appear.

4. To permanently delete the program from your list, select “Yes” using the Channel Switch and press SELECT to confirm.

Activating the Song (S-Seek) Alert

1. Press and hold the MEMO button for 3 seconds to enter the S-Seek Mode.

2. Press and release SELECT. A pop-up screen displaying two selectable options - “Delete” and “S-Seek” will appear (below left).

3. Use the Channel Switch to highlight the “S-Seek” option.

4. Press and release SELECT and an S-Seek confirmation screen will appear. Select the “Yes” option using the Channel Switch and press

SELECT to confirm (below right).

With the S-Seek option enabled, whenever the receiver is turned on, it automatically searches the incoming channels to determine if a

match exists with the program information stored in receiver’s memory. If one or more matches are found, a pop-up screen momentarily

appears for 2- seconds and displays “S-Seek Alert”. An audible beep tone will be heard indicating that a match has been found. The display

then reverts to the S-Seek Alert screen which displays the current matches. You can now select the Artist/Song Title or game that you wish

to listen to. No stored match alert is provided for the currently selected channel. To ensure that no duplicate entries are stored in memory,

the receiver will check the stored input data to ensure the information about to be stored is not already in memory.

• If one or more matches are found, a list appears. You can scroll through the list and select a program using the Channel Switch. Your

selection will be tuned and the display will revert to the last active display mode.

• If a selection is not chosen within 10 seconds, the screen will revert to the last active display and tuning modes.

NOTE: Play of the current selection will continue until a new selection is made.

Menu Display Options

To enter the Menu Options page, press and release the MENU Button. The “Menu Options” list will appear on the display (below).

Using the Channel Switch, highlight the option you wish to adjust and press SELECT. The following options are available:

Sirius ID

Signal Indicator

FM Transmitter

Confirm Tone

Brightness Control

Channel Block

Contrast Control

Time Based Features

Auto Select

Factory Default

Note: If a button is not pressed within 10 seconds, the Receiver will exit the “Menu Options” function and revert back to the Default screen

display.

Sirius ID

Displays your 12 digit Sirius ID (SID) number. The SID is unique to every Streamer GT Receiver and is required to activate your service. It is

recommended that you write this number in the space provided on the last page of this user guide. No adjustments are allowed in this

mode. To exit this option, press the SELECT or Menu Button.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sirius Satellite Radio Radio Handbücher

Sirius Satellite Radio

Sirius Satellite Radio XM Snap! Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio Satellite Stratus 4 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio Xact XS028 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio PowerConnect XMP3I Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio ST2C STARMATE REPLAY Handbuch

Sirius Satellite Radio

Sirius Satellite Radio Starmate 3 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SP3 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio TTR1C Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio TTR1 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SC-H1W Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio Stratus Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SIRIUS STILETTO 2 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio XMsnap Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SIRIUS InV2 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio XMsnap Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio Model Satellite Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio Satellite Stratus 4 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SIRIUS S50 S50 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio GS1SI2TK1 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio Home Signal Distribution Kit Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio Xact XTR1 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio Sirius Starmate 4 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio STILETTO 10 100306B Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio Starmate 3 Bedienungsanleitung

Beliebte Radio Handbücher anderer Marken

EisSound

EisSound KBSound iSelect Bedienungsanleitung

Midland

Midland 1001LWX Bedienungsanleitung

Konig

Konig HAV-SR41 Bedienungsanleitung

Roberts

Roberts exprssion Bedienungsanleitung

VDigi

VDigi DD3.0 Bedienungsanleitung

Radio Shack

Radio Shack 21-1863 Bedienungsanleitung

Roberts

Roberts Stream 207 Bedienungsanleitung

Sony

Sony Walkman SRF-M97 Bedienungsanleitung

Stanley

Stanley FatMax FMC770 Bedienungsanleitung

auna

auna DAB-Radio 10026947 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR190 Bedienungsanleitung

HYT

HYT TC-320 Bedienungsanleitung

B-Tech

B-Tech GMRS-V2 Bedienungsanleitung

Weierwei

Weierwei VEV-V8 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER DAB750 Bedienungsanleitung

Telefunken

Telefunken TF-1505 Bedienungsanleitung

Makita

Makita LXRM03 Bedienungsanleitung

PRESIDENT

PRESIDENT TEDDY R. Bedienungsanleitung