Sirius Satellite Radio Smart Alarm AW-200 Bedienungsanleitung

AW-200 Smart Alarm

Quick Guide

When you purchase a Sirius AW200 Smart Alarm Base Station every device will be pre programmed

for you, Motion detectors, Remotes, Sirens.

In the smart alarm kit box the Devices are labeled as Motion Detector 1 and Motion Detector 2, and

the Remotes are Remote 1 and Remote 2 on the App. The detector number will be written on the

base of the device. The Sirens will also be programmed

Download the Smart life or Tuya App.

Upon installation of the APP on your phone, the App will guide you through the registering process.

Find a location for the base station (usually within the routes WiFi range the base station also

requires a power point connection)

Make sure you know the Routers User Name and Password for your Router as they will be needed

in the installation process.

Base Station App Connection Setup

1 Open the Smart Life or Tuya App.

2 Tap Add the new device icon and then add device.

3 Scroll to the Sensor icon and Tap.

4 Tap Alarm WiFi.

5 On the App enter your Routers User Name and Password then Tap next.

6 On your Base Station push the Menu icon and then Tap WiFi and then Tap Smart link.

7 On the App Tap Confirm the indicator is blinking rapidly.

8 Wait for the configuration to finish then tap Done.

Once you are connected to your router you can now install the devices.

By default the Entry and Exit delays are set to 30 seconds and the user code is 1234.

Best way to install your devices

1 Place the Base Station in central location that is reasonably close to the router for best

WiFi range.

2 You will need to test the WiFi range off the devices to the router.

3 Take the first device to the area that you want to install, then use a remote control and

arm the system and then trigger the device, if the alarm sounds then that device is within

range, disarm the system. and now the device can be installed.

4 Then name the device in the App.

5 Repeat this for the other devices.

Motion Detector

After mounting the Motion Detector don’t forget to take the detector out of walk test mode. After

installation the device should be be in Normal mode. See diagram 1.

The detector number will be written on the base of the device.

Diagram 1

App Instructions

Open up your AW200 App home page. Go to the Accessories page.

Type of Devices for the Sirius AW200.

Detector Remote Wired detector RFID Fingerprint

Edit a device

Tap on a Detector to edit.

Zone Name You can now change the Zone name.

Repeat for each devices.

Zone Mode How the zone Works.

Go to zone Mode and scroll to the Mode want for this device.

Normal, 24 Hours, Delay, Home, 24hr Hour Silent, Home with Delay and, Off.

Repeat for each devices.

Type of zone

Go to zone Mode and scroll to the Mode want. Motion detector, remote etc.

Repeat for each devices.

Delete a Detector

Scroll from right to left then tap the red rubbish bin icon to delete the Detector

Settings

On this page you can set the Entry, Exit, Alarm Siren Duration, Factory Reset and Turn off Push

Notifications etc.

Exit delay 1 - 300 Seconds

Timer Refer to main manual

Alarm sound On by Default

Alarm duration 1 - Minutes

Sensor low battery alarm On by Default

Alarm notification On by Default

Entry delay 1 - 300 Minutes

Countdown with tick tone On by Default

CPG - 64 Base Station only

Alarm call number

Alarm SMS number

Alarm call

Alarm SMS

Unanswered phone redial times

Factory reset Return base station back to factory settings

Hub language 12 languages

Virtual password

How to Add Finger Prints For Arming & Disarming

Tap the Menu icon on the Base Station then the Finger Print icon, Tap +now set which user number

Finger Print you are setting up (0 to 8) then push the Tick icon, now you will have to present the

Finger you wish to use to the finger print scanner. You will have present your finger a total off four

times then Tap the Tick icon to save.

To delete a Finger Print Tap on the rubbish bin icon off the Finger Print to be deleted. To delete all

Finger Prints, Tap on the X and the Tap the Tick icon.

It is recommended to keep a record of which number is assigned Finger Prints

Advance Settings

Smart alarm touch Name your Base Station

Device information Device settings

Tap to run and automation Refer to main manual

Offline notification Off by Default

Share device Share your Device to another phone

Create group Refer to main manual

FAQ Feedback Advanced help manual

Add to home screen Add device to main screen

Check device network Network diagnostics

Device update A red dot indicates update available

Remove device Deletes your device from your phone

Pairing New Device

Tap the +icon.

Activate the Device your installing

Push confirm.

Repeat for each devices.

View Event Log

From the App Home page Tap the me icon, now Tap Message Center.Tap on the the event message

you want to view.

Deleting Event Logs

After viewing the event logs you can delete a selected event or all the events.

Tap now you can select one event by Tapping the circle beside the event and Tapping. You can

select all then Tap .

Sharing Your Device to another phone

From the Home page open up the device you want to share. Tap on the Settings icon. Scroll down

to share device and open that page and Tap on Add Sharing

now Tap on more. Tap on the Gmail icon and your email page will open, now enter the email

address of the person that is sharing that device and send.

The person that is sharing the device need the open the link and follow the on screen prompts to

setup the Smart Life or Tuya App onto the phone.

Log on by using the senders login password. The person will now be able to receive notification.

Wireless Sirens

Connecting to the Base Station

Pressing and hold the SET button until the siren sounds 1 x then release the set button, the strobe

lights flash to indicating that the siren is in sniffer mode. Then press the SOS Icon on the Base

Station, The siren will sounds, this indicates that the pairing with the Base Station is successful.

Now disarm the Base Station.

The Siren will automatically exit the sniffer mode if no any operation is made for more than 20s.

Disconnect Wireless Sirens from the Base Station

Pressing and hold the SET button until the siren sounds 3 x then release the Set button,

Hard wired Zones Lead Setup

Tap the Menu Button and the the Parts button.

The Tap the EOL Zones button.

Now select the Type of zone it is going to

(Door Contact, Motion Detector

Smoke Detector)

Now select what type of zone it is going to be.

( Delay, Instant,24 Hr)

Now confirm the zone number you are using.

Then Tap the Tick Button to save.

CP - G64 SMS Text Messaging

To set up a SMS Text Message number open up your Base Station App and Tap the Settings icon this

will display the settings page. Turn on Alarm SMS (Green) then Tap on the Alarm SMS number. Tap

the Add phone number icon, now you can type in the phone number you want to Text to the Tap

Save. Repeat for extra numbers.

SMS Text Messaging

To set up a SMS Text Message number open up your Base Station App and Tap the

Settings icon this will display the settings page. Turn on Alarm SMS (Green) then

Tap on the Alarm SMS number. Tap the Add phone number icon, now you can type

in the phone number you want to Text to the Tap Save. Repeat for extra numbers.

Sim Card Installation

For more advanced programming please refer to the main installation manual.

Optional Extras

Internal Siren External Siren Smoke Detectors Remotes

Motion Detector Indoor Camera

For more advanced programming please refer to the main installation manual.

Inhaltsverzeichnis

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung

UniPOS

UniPOS 6202L Bedienungsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Rondish

Rondish Nexus Bedienungsanleitung