1. Safety instructions
•
This device is suitable for indoor use (not outdoors) only.
•
All modifications to the device will void the warranty.
•
Repairs are to carry out by skilled personnel o
•
Use only fuses of the same type and original parts as spare parts.
•
Protect the unit from rain and humidity to avoid fire and electric shocks.
•
Make sure to unplug the power supply before opening the housing
1.1.
For safe and efficient operation
Be
careful with heat and extreme temperature
Avoid exposing it to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 32
Keep away from humidity, water and dust
Do not place the set in a
location with high humidity or lots of dust.
Containers with water should not be placed on the set.
To avoid placing on un-
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use
a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing, do not
open the cabinet by yourse
lf, it might result a danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not
using the device for an extended period of time, be sure to disconnect th
IMPORTANT!
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
accept liability for any resulting defects or problems. Make sure the electrical connection is carried out
by qual
ified personnel. All electrical and mechanical connections have to be carried out according to
the European safety standards.
3 / 8
This device is suitable for indoor use (not outdoors) only.
All modifications to the device will void the warranty.
Repairs are to carry out by skilled personnel o
nly.
Use only fuses of the same type and original parts as spare parts.
Protect the unit from rain and humidity to avoid fire and electric shocks.
Make sure to unplug the power supply before opening the housing
For safe and efficient operation
careful with heat and extreme temperature
!
Avoid exposing it to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 32
°F /0°C, or exceeding 104°F /40°C.
Keep away from humidity, water and dust
!
location with high humidity or lots of dust.
Containers with water should not be placed on the set.
!
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
!
a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
!
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing, do not
lf, it might result a danger of electric shock.
Take care with the power cable
!
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not
using the device for an extended period of time, be sure to disconnect th
e plug from the receptacle.
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
accept liability for any resulting defects or problems. Make sure the electrical connection is carried out
ified personnel. All electrical and mechanical connections have to be carried out according to
Use only fuses of the same type and original parts as spare parts.
Protect the unit from rain and humidity to avoid fire and electric shocks.
Make sure to unplug the power supply before opening the housing
.
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing, do not
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not
e plug from the receptacle.
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
accept liability for any resulting defects or problems. Make sure the electrical connection is carried out
ified personnel. All electrical and mechanical connections have to be carried out according to
