ROMEO™ GENERAL WARNINGS
Siser S.r.l.
Viale della Tecnica, 18 - 36100 Vicenza - Italy
phone +39 0444 287960
fax +39 0444 287959
Thank you for buying one of our Siser ROMEOTM High-Definition Cutting
Machines. We are sure you will capitalize on this excellent unit for years if you
take the time to read these instructions carefully.
Introduction
Please study these instructions carefully before transporting, mounting, using
or maintaining the cutting machine, as they will give you important directions
for a safe handling. Moreover you will find information about how to order
spare parts in this manual.
Please retain these instructions for later reference in a safe, easily accessible
place.
Please make sure that all operators of the cutting machine have understood all
instructions and graphic symbols labelled on the press. Accidents can also be
avoided by strictly following the safety regulations according to the machine
directive 2006/42/CE, LVD 2014/30/CE and EMC 2014/30/CE.
It is specifically prohibited to remove or manipulate shrouds or legally
compulsory labels or plates.
The cutting machine has been designed in compliance with the principles of
the Machinery Directive. Already at the design stage, solutions have been
adopted that eliminate risks for the operator in all phases of use: transport,
regulation and maintenance. The materials used for the construction and the
components used are not dangerous and make the cutting machine
compliant with current regulations.
Siser is not liable for faults, accidents, damages, losses etc. resulting from not
following the instructions in this manual.
Note: It is strictly forbidden to operate or mount this cutting machine contrary
to the directions made in this manual.
Before operating the transfer press, the operator must have fully understood
the handling and function of the electric components of this cutting machine
and must have read and grasped all information provided in this manual.
