Sistemes Electronics Progres Agronic Smart Bedienungsanleitung
User’s Manual
TABLE OF CONTENTS
1. BASIC FUNCTIONAL DESCRIPTION................................................................................ 2
2. SPECIFICATIONS.......................................................................................................................... 3
3. CONTROLLER.................................................................................................................................4
3.1. TECHNICAL CHARACTERISTICS.............................................................................4
3.2. INSTALLATION...................................................................................................................4
3.3. CONNECTIONS .................................................................................................................4
3.4. CONTROL AND MANAGEMENT OF THE CONTROLLER......................6
4. LINKING THE CONTROLLER TO THE MOBILE APP..............................................7
5. QUICK GUIDE TO CONFIGURING PROGRAMMING.............................................8
6. MOBILE APP .................................................................................................................................10
6.1. AVAILABLE PROGRAMS............................................................................................10
6.2. UNAVAILABLE CONTROLLERS (NO CONNECTION).............................10
6.3. CONFIGURING THE MOBILE APP ...................................................................... 11
6.4. MENU..................................................................................................................................... 11
6.5. START..................................................................................................................................... 12
6.6. CONFIGURING THE CONTROLLER...................................................................14
6.7. CONFIGURING THE INSTALLER.......................................................................... 17
6.8. SECTORS............................................................................................................................. 18
6.9. CONFIGURING A SECTOR...................................................................................... 20
6.10. PROGRAMS..................................................................................................................... 21
6.11. CONFIGURING A PROGRAM............................................................................... 24
6.12. STATUS OF THE CONTROLLER ......................................................................... 26
6.13. CONTROLLER MANUAL AND MORE INFORMATION........................ 26
7. MANUAL BUTTON.................................................................................................................... 27
8. TROUBLESHOOTING GUIDE AND Q&A .................................................................... 28
Version 1
AGRÓNIC
SMART
2· Manual - Agrónic Smart
1. Basic functional description
The Agrónic Smart is a battery-powered controller for latch-type solenoid valves with two or
three wires, without a screen or a keypad, for use on small land parcels and in gardens.
Using a Bluetooth connection, you can view and manage your controller through the free
Agrónic Smart mobile app, available in the Google Play and App Stores.
There are 2 versions of the controller: the Basic version and the Plus version, which oers additional
features including fertilizer management and an alternating sector sequence in a single program.
The controller has 10 outputs, which are managed based on the established configuration:
• 10 sectors
• 9 sectors + 1 general
• 9 sectors + 1 fertilizer (Plus version)
• 8 sectors + 1 general + 1 fertilizer (Plus version)
It also has 2 digital inputs, which can be used as digital sensors to establish dierent determining
factors for starting or stopping.
Each of the 5 irrigation programs has 5 schedules to start up to 9 sectors, sequentially or grouped
in flexible formats, in a weekly format or once every certain number of days.
It has a button on the controller sheet that permits basic options to be carried out without the
need to connect to the app.
Manual - Agrónic Smart · 3
2. Specications
10 outputs (10 sectors, or 8 sectors with
general and fertilizer outputs)
• 2-wire, 2-inverted-wire and 3-wire outputs
• Output activation voltage may be selected
from: 13V, 19V, 5V (4700 µF condenser)
2 digital inputs
‒ Meter/rain gauge
‒ Digital sensor (temporary stop,
conditional stop, start program)
Sectors
‒ Designation of name for each sector
‒ Specification of time for water hammer
and “stop by sector”
Programs
‒ 5 programs
‒ 10 sectors/program
‒ Various sectors (up to 10) may be
grouped into the same program to
irrigate at the same time.
‒ Specification of irrigation time and
fertilizer for each sector
‒ 5 start hours per program
‒ Irrigation on specific days or by
frequency of days
‒ Start based on schedule, manually or by
digital input
‒ Plus version:
∙ Alternating sequence: Each time
the program starts, it will do so in a
dierent sector, in accordance with the
defined sequence.
∙ Fertilizer: Use of fertilizer and
specification of fertilization time for
each sector in the program sequence.
Manual actions accessible from the Agrónic
Smart app:
‒ Controller: Set the clock
‒ Controller: Enter/Exit Stop
‒ Controller: Enter/Exit Out of service
‒ Program: Start/Stop a specific program
‒ Program: Erase 1 or all programs
‒ Program: Place in Out of service
‒ Program: Pause for a certain amount
of time
‒ Program: Specify a particular manual
factor (=variation in program time)
‒ Sector: Start/Stop/Automatic
‒ Totals: Erasure (coming soon)
Basic manual actions available through the
use of a button:
‒ Output test
‒ Activation of programs
‒ Activation of sectors
‒ Battery test
‒ Reset PIN
4· Manual - Agrónic Smart
The controller is contained in a box suitable for outdoor use with the following characteristics:
Height 150 mm
Width 150 mm
Depth 90 mm
Weight
(approx.) 0.8 Kg
Box dimensions
Power source 2 D batteries, 1.5 V-3 V
Usage 3 V-0.70 mW (average)
Power
Environment
3. Controller
3.1. TECHNICAL CHARACTERISTICS
The Agrónic Smart controller may be installed on a wall or on the upper part of a pole. It includes
a stainless support that facilitates mounting.
3.2. INSTALLATION
Temperature -10°C to +60°C
Humidity < 95 %
Altitude 2000 m
Pollution Degree II
IP 67
3.3. CONNECTIONS
The controller is delivered with a 15-wire hose to facilitate the connections.
In order to ensure that the cables on the module hose are watertight, the use of watertight
terminals is recommended. The connection between these two terminals must be made without
stripping the cables.
Watertight
connection terminals
Manual - Agrónic Smart · 5
Agrónic Smart
Wire colour Cable ID Functionality 1
(2-wire latch) Funcionality 2
(3-wire latch*)
White 1 R1+
Brown 2 R2+
Green 3 R3+
Yellow 4 R4+
Grey 5 R5+
Pink 6 R6+
Blue 7 R7+
Red 8 R8+
Black 9 R9+ (Fertilizer)
Purple 10 R10+ (General)
Grey-pink 11
R1-, R2-, R3-, R4-, R5-,
R6-, R7-, R8-, R9-, R10-
Common stop
Common start
Common stop (CP)
on diode box
Red-blue 12 - Common start (CM)
on diode box
White-green 13 Input 1
Brown-green 14 Input 2
White-yellow 15 Common inputs
The cables on the dierent hoses are identified by colour and number. Connect them using the
following table based on their functionality.
*For 3-wire models, a diode box is required. See assembly diagram on the next page.
You may use 3M Scotchlok connectors (www.3m.com), TYCO Electronics ES Caps (www.tycoelec-
tronics.com) or Cellpack resin splice kits (www.cellpackiberica.com).
6· Manual - Agrónic Smart
The controller is configured and managed through the Agrónic Smart app, which must be
installed on a mobile device (smartphone or tablet).
The controller and mobile device communicate using standard Bluetooth. This means that the
mobile device must be located near the controller in order to be able to communicate with it.
The typical coverage that it oers ranges from 200m if there is a direct line of sight to a few
metres if there are many objects between the controller and the mobile device.
The app can operate and connect to the controller even without an Internet connection.
3.4. CONTROL AND MANAGEMENT OF THE CONTROLLER
ASSEMBLY DIAGRAM 3WIRE LATCH WITH DIODE BOX
Manual - Agrónic Smart · 7
The steps to follow to connect the app to the controller are:
4. Linking the controller to the mobile app
Red switch
In the controller, open the cover
and slide the red button to the “on”
position.
On the mobile device, open Google
Play or the App Store and download the
Agrónic Smart app.
1 2
Activate Bluetooth on the device.
The first time a mobile device
connects to the controller, it will ask for
a PIN code, which is provided along with
the controller.
Open the app.
To help you create irrigation
programming, the next section contains a
quick guide to configuring it.
3
5
4
6
5. Quick guide to conguring programming
The first step is configuring the
controller, which may be accessed
through the icon at the upper right.
In each sector, we can edit the
name and add a photo to better identify it.
Once the controller has been
configured, we can personalise the sectors
in which we plan to work.
The next step is to create an
irrigation program.
1
3
2
4
To configure a program, access the
configuration through the “edit program”
icon.
To incorporate sectors into the
program, select “sector”. And select “--” to
enter the irrigation time for the sector.
If you would like to work with grouped
sectors or an alternating sequence, or
add a manual factor, please see the
“Configuring programs” section.
Select the type of start (if we
want it to irrigate on specific days or by
frequency) and the daily number of hours
of irrigation.
And this is the basic configuration
you’ll need to start irrigating with the
Agrónic Smart.
5
7
6
8
10 · Manual - Agrónic Smart
Home screen with available and
unavailable controllers
Home screen without available
controllers
Available
controllers with a
Bluetooth signal
Irrigating
Configuring
the app
Search tool for
new controllers
Controllers that
have previously
been connected
The first time you access the app, you will not see any controllers. In order for the available con-
trollers to appear, select the “Search for devices” button.
Only one mobile device may be connected to a particular controller at a time.
If you don’t see the controller in your search results, another mobile device may
be connected.
Once the controller has been linked to the app, the Agrónic Smart programming can be
accessed even if it is unavailable (no connection), and controller and program values can be
modified.
The edited values will be highlighted in yellow. These edited values will not be sent until the
controller is reconnected to the app.
Once the controller is connected to the app, the app will ask if you would like to send the
pending parameters. Select “send” to overwrite the existing values and replace them with the
new ones, or select “don’t send” to return to the previous programming.
6. Application
6.1. AVAILABLE CONTROLLERS
6.2. UNAVAILABLE CONTROLLERS NO CONNECTION
NOTE
Inhaltsverzeichnis
Andere Sistemes Electronics Progres Controller Handbücher
