Skil QC536001 Bedienungsanleitung
WARNING: To reduce the risk of injury, the user must read and understand the
Owner’s Manual before using this product. Save these instructions for future reference.
AVERTISSEMENT : Afin de réduire les risques de blessure, l’utilisateur doit lire et
comprendre le guide d’utilisation avant d’utiliser cet article. Conservez le présent guide
afin de pouvoir le consulter ultérieurement.
ADVERTENCIA : Para reducir el riesgo de lesiones, el usuario debe leer y comprender
el Manual del operador antes de utilizar este producto. Guarde estas instrucciones para
consultarlas en caso sea necesario.
Owner’s Manual
Guide d’utilisation
Manual del propietario
For Customer Service
Pour le service à la clientèle
Servicio al cliente 1-877-SKIL-999 OR www.skil.com
WARNING: To reduce the risk of injury, the user must read and understand the
Owner’s Manual before using this product. Save these instructions for future reference.
AVERTISSEMENT : Afin de réduire les risques de blessure, l’utilisateur doit lire et
comprendre le guide d’utilisation avant d’utiliser cet article. Conservez le présent guide
afin de pouvoir le consulter ultérieurement.
ADVERTENCIA : Para reducir el riesgo de lesiones, el usuario debe leer y comprender
el Manual del operador antes de utilizar este producto. Guarde estas instrucciones para
consultarlas en caso sea necesario.
Charger
Chargeur
Cargador
Model/ Modelo/ Modèle: QC536001
2
TABLE OF CONTENTS
Charger Safety Instructions . ....................................3-4
Extension Cords ................................................4
FCC Caution....................................................5
Symbols .....................................................6-9
Get to Know Your Charger .......................................10
Specications .................................................10
Important Charging Notes .......................................11
Operating Instructions .......................................12-14
Maintenance...................................................15
Troubleshooting ...............................................15
Limited Warranty of SKIL Charger.................................16
3
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS
DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS.
CHARGER SAFETY INSTRUCTIONS
Save these instructions. This manual contains important safety and operating instructions
for battery charger model QC536001.
Before using battery charger, read all instructions and cautionary markings on battery
charger, battery and product using battery.
CAUTION To reduce risk of injury, charge only SKIL rechargeable batteries
listed in the manual. Other types of batteries may burst causing personal
injury and damage.
Charge battery pack within the required temperature range. Store charger and battery
pack in locations where temperature is within the recommended storage temperature
range. This is important to prevent serious damage to the battery cells.
Do not recharge battery in damp or wet environment. Do not expose charger to rain or
snow. Water entering battery charger may result in electric shock or re.
Battery leakage may occur under extreme usage or temperature conditions. Avoid
contact with skin and eyes. The battery liquid is caustic and could cause chemical burns
to tissues. If liquid comes in contact with skin, wash quickly with soap and water. If the liquid
contacts your eyes, ush them with water for a minimum of 10 minutes and seek medical
attention.
Place charger on at nonammable surfaces and away from ammable materials when
recharging battery pack. Carpeting and other heat insulating surfaces block proper air
circulation which may cause overheating of the charger and battery pack. If smoke or melting
of the charger or battery pack is observed, unplug the charger immediately and do not use the
battery pack or charger. Contact customer service immediately.
Keep the cord and charger from heat to prevent damage to housing or internal parts.
Do not allow gasoline, oils, petroleum-based products, etc. to come in contact with
plastic parts. These materials contain chemicals that can damage, weaken, or destroy
plastic.
Make sure cord is located so that it will not be stepped on, tripped over, or otherwise
subjected to damage or stress. Damaged plug and cord may result in electric shock or re.
Disconnect the charger by pulling the plug rather than the cord. Do not operate charger
with damaged cord or plug; have them replaced immediately. Damaged plug or cord may
result in electric shock or re.
Do not insert battery pack in charger if battery pack case is cracked. Using damaged
battery pack may result in electric shock or re.
Do not disassemble charger or operate the charger if it has received a sharp blow, been
dropped or otherwise damaged in anyway. Incorrect reassembly or damage may result in
electric shock or re.
Before each use, check the battery charger, cable and plug. If damage is detected,
do not use the battery charger. Never open the battery charger yourself, take it to a
SKIL Factory Service Center, or qualied serviceman only using original spare parts.
Incorrect reassembly may result in electric shock or re.
Do not touch the uninsulated portion of output connector or uninsulated battery
terminal. There is a risk of electric shock.
4
Do not use attachment not recommended or sold by SKIL. Using attachments not
recommended may result in electric shock or re.
Do not store battery pack in charger. Battery pack stored in charger over a long period of
time could lead to battery pack damage and re.
Unplug charger from outlet before storage, attempting any maintenance or cleaning.
Such preventive safety measures reduce the risk of electric shock or re.
Keep the battery charger clean by blowing compressed air on charger vents and wiping
the charger housing with a damp cloth. Contamination may result in electric shock or re.
Replace battery pack if a substantial drop in operating time per charge is observed.
Battery pack may be nearing the end of its life.
To reduce the risk of injury, close supervision is necessary when an appliance is used
near children.
Do not use outdoors.
EXTENSION CORDS
WARNING AN EXTENSION CORD SHOULD NOT BE USED UNLESS ABSOLUTE-
LY NECESSARY. Use of improper extension cord could result in risk of re
and electrical shock. If an extension cord is used, make sure:
a. The pins on plug of extension cord are the same number, size, and shape as those of plug
on charger.
b. The extension cord is properly wired and in good electrical condition.
c. The wire size is large enough for AC ampere rating of charger as specied below:
Length of Cord (Feet) 25’ 50’ 100’ 150’
Size of Cord (AWG) 18 16 16 14
Extension Cord Chart for 220/240 Volt Tools:
0.75mm2 CORD 50 Meters
1.0mm2 CORD 75 Meters
d. An extension cord is a temporary solution. Move the charger to a standard receptacle as
soon as the job has been completed.
5
FCC CAUTION
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
DANGER People with electronic devices, such as pacemakers, should consult
their physician(s) before using this product. Operation of electrical
equipment in close proximity to a heart pacemaker could cause interference or failure
of the pacemaker.
6
SYMBOLS
Safety Symbols
The purpose of safety symbols is to attract your attention to possible dangers. The safety
symbols and the explanations with them deserve your careful attention and understanding.
The symbol warnings do not, by themselves, eliminate any danger. The instructions and
warnings they give are no substitutes for proper accident prevention measures.
WARNING Be sure to read and understand all safety instructions in this Owner's
Manual, including all safety alert symbols such as “DANGER,”
“WARNING,” and “CAUTION” before using this tool. Failure to following all instructions listed
below may result in electric shock, re, and/or serious personal injury.
The denitions below describe the level of severity for each signal word. Please read the manual
and pay attention to these symbols.
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION CAUTION, used with the safety alert symbol, indicates a hazardous
situation which, if not avoided, will result in minor or moderate injury.
Damage Prevention and Information Messages
These inform the user of important information and/or instructions that could lead to equipment
or other property damage if they are not followed. Each message is preceded by the word
“NOTICE”, as in the example below:
NOTICE: Equipment and/or property damage may result if these instructions are not followed.
WARNING The operation of any power tools can result in foreign
objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool operation, always
wear safety goggles or safety glasses with side shields and a full face
shield when needed. We recommend a Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with side shields. Always use
eye protection which is marked to comply with ANSI Z87.1.
7
SYMBOLS (CONTINUED)
IMPORTANT: Some of the following symbols may be used on your tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to operate the
tool better and more safely.
Symbol Name Designation/Explanation
V Volts Voltage (potential)
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
kg Kilograms Weight
min Minutes Time
s Seconds Time
Wh Watt-hours Battery capacity
Ah Ampere-Hours Battery capacity
ØDiameter Size of drill bits, grinding wheels, etc.
n0No load speed Rotational speed, at no load
nRated speed Maximum attainable speed
…/min Revolutions or reciprocation
per minute Revolutions, strokes, surface speed,
orbits, etc. per minute
0 Off position Zero speed, zero torque...
1,2,3,…
I,II,III, Selector settings Speed, torque or position settings. Higher
number means greater speed
Innitely variable selector
with off Speed is increasing from 0 setting
Arrow Action in the direction of arrow
Alternating current Type or a characteristic of current
Direct current Type or a characteristic of current
Alternating or direct current Type or a characteristic of current
Class II tool Designates Double Insulated Construction
tools.
Earthing terminal Grounding terminal
Li-ion RBRC seal Designates Li-ion battery recycling
program
Ni-Cad RBRC seal Designates Ni-Cad battery recycling
program
8
Symbol Name Designation/Explanation
Read manual symbol Alerts user to read manual
Wear eye protection symbol Always wear safety goggles or safety
glasses with side shields and a full face
shield when operating this product.
9
SYMBOLS (CERTIFICATION INFORMATION)
IMPORTANT: Some of the following symbols for certication information may be used on your
tool. Please study them and learn their meaning. Proper interpretation of these symbols will
allow you to operate the tool better and more safely.
Symbol Designation/Explanation
This symbol designates that this tool is listed by Underwriters Laboratories.
This symbol designates that this tool is recognized by Underwriters
Laboratories.
This symbol designates that this tool is listed by Underwriters
Laboratories, to United States and Canadian Standards.
This symbol designates that this tool is listed by the Canadian
Standards Association.
This symbol designates that this tool is listed by the Canadian
Standards Association, to United States and Canadian Standards.
This symbol designates that this tool is listed by the Intertek Testing
Services, to United States and Canadian Standards.
This symbol designates that this tool complies to NOM Mexican
Standards.
This symbol designates that this tool is listed by the California Energy
Commission.
10
GET TO KNOW YOUR CHARGER
PWRCore 20™ Charger
Charging Indicator
Defect Indicator
Cord
Fig. 1
SPECIFICATIONS
Rated input 120V a.c. 60Hz 150W
Rated output 20V
Battery
Compatibility
2Ah:
SKIL BY519701
SKIL BY519702
2.5Ah:
SKIL BY519703 4Ah:
SKIL BY519601 5Ah:
SKIL BY519603
Recommended
Charging
Temperature 41°F(5°C) ~ 95°F(35°C)
Recommended
Storage
Temperature 32°F (0°C)~104°F (40°C)
Inhaltsverzeichnis
Sprachen:
Andere Skil Akkuladegerät Handbücher
Skil
Skil CR1 3128 Series Bedienungsanleitung
Skil
Skil SC5364-00 Bedienungsanleitung
Skil
Skil 3120 Bedienungsanleitung
Skil
Skil 3122 Bedienungsanleitung
Skil
Skil F 000 624 017 Bedienungsanleitung
Skil
Skil SC535801 Bedienungsanleitung
Skil
Skil PWRCORE 20 BY519702 Bedienungsanleitung
Skil
Skil PWRCORE 20 SC5358E-01 Bedienungsanleitung
Skil
Skil PWRCORE 20 QC536001 Bedienungsanleitung
Skil
Skil PWRCORE 12 PWRJUMP QC535701 Bedienungsanleitung
