SKIPLY Smilio S Bedienungsanleitung

User Manual

Smilio S - FW 2.0.1.4

Test our Smilio S simulator

https://skiplyfrance.github.io/simulatorS.html

All information and data contained in this document are the exclusive property of SKIPLY SAS and may neither be used nor disclosed

without its prior written consent.

~ 2 ~

To install and ensure correct operation of your Smilio S, please read carefully and follow the

instructions contained in this user manual.

SKIPLY SAS

Rue Henri Bouvier

73630 LE CHATELARD

France

Phone: +33 4 79 52 29 31

Technical support: +33 4 58 16 01 53

www.skiply.eu

contact@skiply.org

Welcome in the Smilio world.

Before starting your Smilio S, read carefully this user manual. It will help

you to use your device in the best and most efficient way.

 
All information and data contained in this document are the exclusive property of SKIPLY SAS and may neither be used nor disclosed 
without its prior written consent. 
~ 3 ~ 
 
Table of contents 
 
Legal Information ........................................................................................................................5
1. Right to make changes......................................................................................................5
2. Suitability for use...............................................................................................................5
3. Applications.......................................................................................................................5
4. No offer to sell or license...................................................................................................5
5. Trademarks.......................................................................................................................5
6. Revision History ................................................................................................................5
Overview.....................................................................................................................................6
Package contents........................................................................................................................6
Requirements..............................................................................................................................7
Environment................................................................................................................................7
Contact information.....................................................................................................................7
LoRa™ or SIGFOX® configuration..............................................................................................8
Insert or replace batteries............................................................................................................9
Boot sequence..........................................................................................................................10 
1. Sigfox® boot sequence ...................................................................................................10 
2. Sigfox® Downlink Query..................................................................................................11 
3. LoRaWAN™ boot sequence............................................................................................11 
4. LoraWan™ Downlink.......................................................................................................11 
4.1. Smilio S Uplink/Downlink port..........................................................................................11 
Manual Reset.......................................................................................................................12 
Hard-Reset...........................................................................................................................12 
Buttons configuration............................................................................................................12 
Data Frames ........................................................................................................................13 
1. « Keep alive » data frame................................................................................................13 
2. Normal data frame...........................................................................................................14 
3. Hall effect sensor activation data frame...........................................................................15 
4. Special data frame...........................................................................................................15 
Config settings & setting frames...........................................................................................16 
1. Config settings.................................................................................................................16 
2. Downlink Query Frame....................................................................................................18 

 
All information and data contained in this document are the exclusive property of SKIPLY SAS and may neither be used nor disclosed 
without its prior written consent. 
~ 4 ~ 
 
3. Downlink Result Frame....................................................................................................19 
4. Online Downlink Frame configurator................................................................................20 
Settings description..............................................................................................................21 
1. Duty Cycle.......................................................................................................................21 
2. ADR (Adaptative Data Rate) - Useable only with LoRaWAN............................................21 
1. Force DR0 at join procedure - Useable only with LoRaWAN............................................21 
2. Backoff parameters - Useable only with LoRaWAN.........................................................21 
3. Piggyback - Useable only with LoRaWAN .......................................................................22 
Running Mode description....................................................................................................23 
1. Running Mode 6..............................................................................................................23 
2. Running Mode 7..............................................................................................................24 
3. Running Mode 8: PULSE.................................................................................................25 
4. Running Mode 9: CODE..................................................................................................26 
4.1. Code Data Frame format............................................................................................26 
Dimensions ..........................................................................................................................28 
Safety recommendations......................................................................................................29 
Symbols...............................................................................................................................29 
Declaration of Conformity.....................................................................................................30 
Certificates...........................................................................................................................31 
1. Sigfox® Ready certificate RC1 ........................................................................................31 
2. Sigfox® Ready certificate RC2 ........................................................................................32 
3. Sigfox® Ready certificate RC3 ........................................................................................33 
4. IP 65 Certification............................................................................................................34 
 
 

All information and data contained in this document are the exclusive property of SKIPLY SAS and may neither be used nor disclosed

without its prior written consent.

~ 5 ~

1. Legal Information

1.1.Right to make changes

SKIPLY reserves the right to make changes to information published in this document, including without

limitation specifications and product descriptions, at any time and without notice.

1.2.Suitability for use

SKIPLY accepts no liability for inclusion and/or use of SKIPLY products in commercial products or

applications and therefore such inclusion and/or use it at the customer’s own risk. In no event shall

SKIPLY be liable for any direct, indirect, incidental, special, exemplary, or consequential damages

(including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits, or

business interruption) however caused and on any theory of liability, arising in any way out the use of

the hardware and software.

1.3.Applications

Applicationsthat are described herein forany of these products areforillustrative purposes only. SKIPLY

makes no representation or warranty that such applications will be suitable for the specified use without

further testing or modification.

1.4.No offer to sell or license

Nothing in this document may be interpreted or construed as an offer to sell products that is open for

acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other

industrial or intellectual property rights.

1.5.Trademarks

Notice: All referenced trademarks, product names, service names, and trademarks are the property of

their respective owners.

1.6.Revision History

Date

Reference

Description

Author

Version

07th January 2020

NUS_001

Initial

C.S.

0.1

All information and data contained in this document are the exclusive property of SKIPLY SAS and may neither be used nor disclosed

without its prior written consent.

~ 6 ~

2. Overview

•LoRa™ WAN 1.0.2 EU Class A & C

•SIGFOX® ready

•Certified on major LoraWan networks: Objenious, Orange, …

•Certified on Sigfox® networks

•Easy to use and deploy

•5 AA limited power 3.6 V Primary lithium-thionyl chloride (Li-SOCl2) batteries.

•IP65 certified waterproof enclosure

•UV resistant and antibacterial keypad available

•Class III equipment

•RoHS Compliant - REACH Compliant

3. Package contents

A. Smilio S with seal

B. Battery lid

C. 6 Philips screws for battery lid

All information and data contained in this document are the exclusive property of SKIPLY SAS and may neither be used nor disclosed

without its prior written consent.

~ 7 ~

4. Requirements

•LPWAN network subscription (SIGFOX® or LoRa™) or Gateway

•LoRaWAN ID:

odev_uid

oapp_uid

oapp_key

odev_addr

onwk_skey

oapp_skey

•SIGFOX® ID:

osfx_id

osfx_pac

•Network LoRa™WAN and/or SIGFOX® coverage (the indoor and outdoor coverage can be

different. Please check the real coverage).

•Phillips screwdriver.

NOTE: To obtain the LoRa/SIGFOX® IDs, please contact our technical support at [email protected]g .

5. Environment

•Operating temperature -10°C to +45°C

•Storage temperature -40°C to 85°C

•Relative humidity 0% to 80% (not condensing)

•Maximum altitude for operation: 2000 meters above sea level

6. Contact information

For more information and for sales office addresses, please visit:

https://www.skiply.eu/

All information and data contained in this document are the exclusive property of SKIPLY SAS and may neither be used nor disclosed

without its prior written consent.

~ 8 ~

7. LoRa™ or SIGFOX® configuration

To configure the network (LoRa™ or SIGFOX®), please use the jumper on the motherboard behind

the battery compartment lid.

Figure 1

NOTE: Before remove or place the jumper, remove all batteries to turn off the device. NOT

HOT SWAPPING.

•For LoRa™ use and configuration, remove the jumper.

•For SIGFOX® use and configuration, place the jumper on its pin headers.

All information and data contained in this document are the exclusive property of SKIPLY SAS and may neither be used nor disclosed

without its prior written consent.

~ 9 ~

8. Insert or replace batteries

NOTE: Use only limited power 3.6 V Primary lithium-thionyl chloride (Li-SOCl2) batteries. We

recommend using batteries SAFT LS14500 or EEMB ER14505.

NOTE: Batteries replacement must be done in a dry indoor environment.

NOTE: Loading the batteries with their polarities inverted is forbidden and might cause fire and

injury, or damage to the surrounding areas.

NOTE: The user must replace all batteries at the same time and replace only with new batteries of

the recommended type. There is a risk of explosion if battery is replaced by an incorrect or non-

recommended type.

1. Before opening the battery compartment lid, if moisture or water drops are present, dry Smilio S

housing with clean soft towel.

2. Open the battery compartment lid using the 6 Philips screws and the appropriate screwdriver.

3. In case of battery replacement, remove batteries. [1]

4. Respect polarity. [1]

5. Insert five AA limited power 3.6 V Primary lithium-thionyl chloride (Li-SOCl2) batteries. [2]

6. Check that the gasket, which prevents water and dust from entering, is at the right place and

untwisted.

7. Close the battery compartment lid using the 6 Philips screws and the appropriate screwdriver. [3]

NOTE: Do not dispose of used batteries in unauthorized places (you should respect the

environment by taking the batteries to a suitable collection site). Batteries should not be disposed of in

household waste but should be recycled instead.

NOTE: Do not dispose of batteries in a fire.

All information and data contained in this document are the exclusive property of SKIPLY SAS and may neither be used nor disclosed

without its prior written consent.

~ 10 ~

9. Boot sequence

Throughout the boot process, the LEDs will blink alternatively green and red.

NOTE: Each time Smilio S is turned off and turned on (batteries removed and replaced), or if the

user pushes the reset button, or if the user makes a manual reset, the boot sequence is executed.

9.1.Sigfox® boot sequence

At the end of the Sigfox® boot sequence, Smilio S will try to update its configuration via downlink.

Therefore, an acknowledged downlink query frame, which starts by “04”, is sent by the device to the

Sigfox® backend. Several possible scenarios:

•Boot with updating settings and restart

oPreconditions: a valid downlink payload available on the Sigfox® backend and the

downlink payload is different from the stored settings.

oIf the downlink payload is received by the device, and settings are updated, Smilio’s

LEDs light up steadily green for 3 seconds and Smilio S resets. After the second

boot sequence, Smilio’s LEDs light up steadily red for 3 seconds. The red color

doesn't mean that updating and restart have failed, but that the stored settings aren’t

updated twice in a row.

•Boot without updating settings

oPreconditions: a valid downlink payload available on the Sigfox® backend and the

downlink payload is the same as the stored settings.

oIf the downlink payload is received by the device, Smilio’s LEDs light up steadily

green for 3 seconds. The Smilio S does not restart because the stored payload is

the same as downloaded payload.

•Boot without payload, without valid payload or out of network coverage

oPreconditions: an invalid downlink payload available on the Sigfox® backend, no

payload available on the Sigfox® backend or “Downlink Mode “at “NONE”, and

downlink payload not received by device.

oNo payload is received by device, settings aren’t updated, Smilio’s LEDs light up

steadily red for 3 seconds. The Smilio S does not restart. In this case, the last

settings saved in EEPROM flash memory are used.

At the first startup and without downlink, the factory default settings will be used.

LEDs lighting sequence

Start End Start End

New valid payload and upadting settings

Same valid payload no upadting settings N/A N/A N/A

No payload / No valid payload / out of

network coverage

N/A N/A N/A

Boot sequence 1

Restart

Boot sequence 2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung