Skope TCE1000 Bedienungsanleitung

TCE1000

SKOPE Two Door Upright Fridge

User Manual

MAN80031 Rev. 1.1 Aug. 2017

SKOPE Warranty Protection

It’s quick and simple. Take a few minutes to register

your SKOPE product and enjoy more efficient

support plus other warranty benefits. When

registering, make sure you have your cabinet serial

number at hand.

To register online:

Visit our website at www.skope.com/warrantyprotection

then complete and submit the online registration form.

Or freephone:

1800 121 535 (Australia)

0800 947 5673 (New Zealand)

SKOPE 1-year Extended Warranty

Extend your Warranty Protection by 1 year during registration. Please

check you have not already organised an extended warranty through

your dealer at time of purchase. For pricing information on an extended

warranty visit www.skope.com/warrantyprotection

Service & Support

We know you will get years of satisfaction from your new SKOPE

product when you follow a few simple preventative maintenance

guidelines.

Helpful information is available on our website

www.skope.com/serviceandsupport

Thank you for purchasing a SKOPE refrigeration product.

SKOPE TCE1000

User Manual iii

CONTENTS

1 Installation

Safety First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Positioning the Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Climate Class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Chiller Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Shelf Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Repositioning Shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2 Operation

Automatic Start-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Loading Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Electronic Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Temperature Setpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Messages and Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3 Servicing

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Condenser Coil & Optional Filter . . . . . . . . . . . . . . . . . . . . . . . . .10

Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4Installation

User Manual

SKOPE TCE1000

1Installation

Safety First Always observe safety precautions when using any electrical appliance.

Read these instructions carefully and retain them for future reference.

When the appliance is used by or near young children or infirm persons,

close supervision is necessary, especially to ensure children do not play

with it.

Do not use this appliance for other than its intended use.

Do not cover the grilles or block the entry or exhaust of airflow by

placing objects up against the refrigeration unit.

Do not probe any opening.

Only use this appliance with the voltage specified on the cabinet rating

label affixed to the refrigeration unit.

Ensure the appliance has adequate ventilation as this is essential to

economical, high performance.

Be careful not to touch moving parts and hot surfaces.

For your own safety and that of others, ensure that all electrical work is

done by authorised personnel.

If the power supply flexible cord becomes damaged, it must be replaced

by an authorised service agent or similarly qualified person in order to

avoid a hazard.

Ensure all necessary safety precautions are observed during installation

or removal of the refrigeration unit.

The appliance is not designed to be stable while in motion. Use extreme

caution when moving or transporting it.

Do not store explosive substances such as aerosol cans with a

flammable propellant in this appliance.

Please contact SKOPE Customer Services for advice regarding

disposal of this appliance.

CAUTION

Never overload the power supply, which could damage the

chiller and product. See the rating label inside the cabinet for

the safe power supply and current draw.

WARNING

Always unplug the chiller from the mains power supply before

cleaning or maintenance.

SKOPE TCE1000

Installation

User Manual

Positioning the Cabinet

Climate Class The chiller is designed to operate within a climate class 4 environment (30°C

@ 55% relative humidity).

Chiller

Location

The location of the chiller may be the single most important decision that will

extend its life and ensure economical, high performance. Allow space for the

door/s to open and close properly. Self-closing doors have internal torsion

bars pretensioned at the factory. Ensure the cabinet is on a level surface so

that the door shuts and correctly seals, and that the doors are unobstructed.

Level footing also prevents the condensate tray from overflowing.

Power Cord The power cord exits from the top rear of the cabinet and is fitted with a 3-pin

plug. Pull the power cord around so that it’s not trapped before you position

the cabinet.

Ventilation A minimum 300mm ventilation clearance must be provided above the chiller.

Never store cardboard cartons or other items on top of the refrigeration unit.

IMPORTANT

Ensure minimum ventilation clearances are met.

6Installation

User Manual

SKOPE TCE1000

Shelves

The chiller is fitted with four layers of wire shelves which may be positioned

at different heights to suit various products.

Shelf Clips Each wire shelf is held in place with six shelf clips, which engage in the shelf

support strips.

To fit a shelf clip

Repositioning

Shelves When repositioning standard shelves, unload and remove the shelf,

establish the desired position and slide the shelf clip in each of the shelf

support strips to the desired position. Sit the shelves on the shelf clips.

1. The shelf clip twists onto

the shelf support strip.

Locate the square pin on

the back of the clip into

the support strip, and

twist the clip so that it

sits level and locks in

place.

Shelf

support

strip

Shelf clip

SKOPE TCE1000

Operation

User Manual

2Operation

Automatic Start-Up

After the cabinet has been positioned in a suitable place, plug it in and check

the following activity.

Lighting

The cabinet interior and sign are lit by LED lights. The lights can be switched

on and off using the light switches below the sign.

The cabinet and sign LED lights are all non-serviceable and must not be

tampered with in any way. If a light is suspected of being faulty, arrange a

service call.

Item Activity

Electronic

Controller

An electronic controller runs the chiller and is visible in a

cutout below the sign. The display panel on the electronic

controller shows the cabinet internal temperature.

Lighting

The lights that illuminate the sign and cabinet interior will come

on a few seconds after the chiller is turned on. If the lights do

not come on, check the light switches below the sign and

switch them on (see “Lighting” below).

Refrigeration

System

The refrigeration system will start a few seconds after the

chiller is turned on.

To verify, listen for the compressor and check that the

refrigeration system light is lit on the electronic controller.

Note: If the cabinet is powered on and off repeatedly, the

compressor may enter protection mode and stay off for 5

minutes.

Light switches

8Operation

User Manual

SKOPE TCE1000

Loading Product

Let the chiller run 30 minutes before loading it with product the first time.

When loading the shelves with product:

Allow adequate air space around each item to ensure even cooling and

efficient operation of the chiller.

Do not exceed a maximum load of 20kg per shelf.

Remove some product if the shelves are flexing.

Do not let anything overhang the shelves because this might stop the

doors from shutting or even break something.

SKOPE TCE1000

Operation

User Manual

Electronic Controller

Introduction The chiller is fitted with an electronic controller which is visible through a

cutout below the sign. The electronic controller is pre-programmed and

requires no initial setup or additional programming. SKOPE does not

recommend that the settings be changed unless it is absolutely necessary.

Temperature

Setpoint

The chiller temperature is set to stay between 1.5°C and 3.5°C. The setpoint

can be adjusted to other temperature ranges for specialist applications if

required (see below).

SKOPE do not recommend that the setpoint range be changed unless it is

absolutely necessary, and then only by small increments at a time.

To change the temperature setpoint range

Messages and

Alarms

The following table explains messages and alarms that the electronic

controller displays.

Messages and alarms

1. Refer to the table below to determine the required temperature range.

Set Temperature range Set Temperature range

00.0°C to 1.5°C 53.5°C to 5.5°C

10.5°C to 2.5°C 64.0°C to 6.0°C

21.5°C to 3.5°C 75.0°C to 7.0°C

32.5°C to 4.5°C 86.0°C to 8.0°C

43.0°C to 5.0°C - -

2. Press and hold the up and down buttons on the electronic controller for 3

seconds to unlock the controller.

3. Use the up and down buttons to scroll to the set number assigned to the

required temperature range, as shown in the table above.

4. Once the desired set is displayed, leave the controller for 5 seconds. The

display changes back to the cabinet internal temperature and the new set is

saved.

Display Description

The cabinet internal temperature. The temperature is what the

sensor inside the chiller detects, and not necessarily the product

temperature. However, they may be very close depending on how

the controller is set to sense temperature.

Electronic controller lock indicator. On when the electronic controller

is locked. Off when the electronic controller is unlocked. Press and

hold the up and down buttons for 3 seconds to unlock the electronic

controller.

Compressor indicator. On when the compressor starts. Off when the

compressor stops.

Temperature sensor fault. This indicates a fault with the temperature

sensor. Arrange a service call.

10 Servicing

User Manual

SKOPE TCE1000

3Servicing

Cleaning

Cabinet Wipe the inside and outside of the cabinet with a damp cloth, taking care to

keep moisture away from electrical parts. As with any maintenance, ensure

the chiller is unplugged from the power supply before cleaning.

Condenser

Coil To ensure trouble-free performance, the condenser coil must be kept clean.

We strongly urge monthly cleaning with a soft brush to remove dust and fluff.

A more thorough cleaning is required by qualified service personnel every

six months. The condenser coil must be kept clean for efficient and reliable

operation.

To clean the condenser coil and optional condenser filter

WARNING

Unplug the chiller from the power supply before cleaning the

condenser filter and condenser coil.

1. Unplug the chiller from the power supply.

2. Use steps or a platform to

access the back of the

sign, and unscrew the two

wire cover screws (located

above the back of the

electronic controller

housing). Note: Image

shows back of sign with

cabinet side removed.

3. Swing the sign out from

the cabinet and unplug the

3× plugs. Lift the sign off

and place aside.

4. Brush the condenser coil

with a soft brush to

remove any dust and fluff.

5. Refit the sign panel and reconnect the 3× plugs. Reconnect to the power

supply.

Wire cover

screws

Front panel

Condenser coil

Inhaltsverzeichnis

Andere Skope Kühlschrank Handbücher

Skope

Skope EziCore BCE Series Bedienungsanleitung

Skope

Skope SERENE SC430N Bedienungsanleitung

Skope

Skope EziCore TCE650N Bedienungsanleitung

Skope

Skope TCE1000N Bedienungsanleitung

Skope

Skope TCE1000N Bedienungsanleitung

Skope

Skope SERENE SC430N Bedienungsanleitung

Skope

Skope ProSpec Series Bedienungsanleitung

Skope

Skope B Series Bedienungsanleitung

Skope

Skope OD360N Bedienungsanleitung

Skope

Skope HB85 Bedienungsanleitung

Skope

Skope SKT500W Series Bedienungsanleitung

Skope

Skope EziCore BCE Series Bedienungsanleitung

Skope

Skope ReFlex Series Bedienungsanleitung

Skope

Skope TME ActiveCore Bedienungsanleitung

Skope

Skope ReFlex Underbench RF7.UBR.2.SD Bedienungsanleitung

Skope

Skope ReFlex Bedienungsanleitung

Skope

Skope ReFlex Series Bedienungsanleitung

Skope

Skope ReFlex Bedienungsanleitung

Skope

Skope OD1100N Bedienungsanleitung

Skope

Skope ReFlex RF7.UPR.1.SD Bedienungsanleitung

Skope

Skope Pegasus Vertical series Bedienungsanleitung

Skope

Skope OD1100N Bedienungsanleitung

Skope

Skope ReFlex Series Bedienungsanleitung

Skope

Skope HB260 Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung