SKYDANCE V1 Bedienungsanleitung

User Manual Ver 1.0.2 Page 1

Operation temperature

Case temperature (Max.)

Environment

IP20

IP rating

Dimming data

Dimming range

RF 2.4GHz + Push Dim

30m

4096 levels

0 -100%

Technical Parameters

Output power 40W/96W/192W/288W

(5V/12V/24V/36V)

Output voltage 5-36VDC

Output current 1CH,8A

Input and Output

Input voltage 5-36VDC

Input current 8.5A

Safety and EMC

EMC standard (EMC) EN301 489,EN 62479

Radio Equipment(RED) EN300 328

Certification CE,EMC,LVD,RED

EN60950

Safety standard(LVD)

Output type Constant voltage

Warranty and Protection

5 years

Protection Reverse Polarity

Warranty

Input signal

Control distance

Dimming level

Ta: -30

C ~ +55

T c: +85

RED

Model No.: V1

Single Color LED Controller

1 Channel/Step-less dimming/Wireless remote control/Auto-transmitting/Synchronize/Push Dim

500Hz (default)

PWM Frequency

Dimming curve Logarithmic

Features

● 4096 levels 0-100% dimming smoothly without any ﬂash.

● Match with Skydance’s 2.4G single zone or multiple zone dimming remote control.

● One RF controller accept up to 10 remote control.

● Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.

● Synchronize on multiple number of controllers.

● Connect with external push switch to achieve on/off and 0-100% dimming function.

V1 Single Color LED Controller

Push Switch

LED Controller

AC100-240V

Power Supply

5-36VDC

Constant Voltage

+Single color LED strip

Match Remote Control (two match ways)

Use the controller’s Match key

Match:

Short press match key, immediately press on/off

key (single zone remote) or zone key (multiple zone

remote) of the remote.

Use Power Restart

Match:

Switch off the power, then switch on power again,

immediately short press on/off key (single zone remote)

or zone key (multiple zone remote) 3 times on the remote.

The light blinks 3 times means match is successful.

Delete:

Switch off the power, then switch on power again,

immediately short press on/off key (single zone remote)

or zone key (multiple zone remote) 5 times on the remote.

The light blinks 5 times means all matched remotes were

deleted.

Delete:

Press and hold match key for 5s to delete all match,

The light blinks 5 times means all matched remotes

were deleted.

97mm

33mm

18mm

Mechanical Structures and Installations

LED output -

LED output +

Power input -

Power input +

LED indicator

Match key

Push switch com

Push switch in

Installation rack

Wiring Diagram

End user can choose the suitable match/delete ways. Two options are offered for selection:

RF remote

+Single color LED strip

LED Controller

User Manual Ver 1.0.2 Page 2

Application notes

1. All the receivers in the same zone.

2. Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.

Zone 1 Zone 2 Zone 3

RF remote

Push Dim Function

● Short press:

Turn on or off light.

● Long press (1-6s):

Press and hold to step-less dimming,

With every other long press, the light level goes to the opposite direction.

● Dimming memory:

Light returns to the previous dimming level when switched off and on again, even at power failure.

● Synchronization:

If more than one controller are connected to the same push switch, do a long press for more than 10s,

then the system is synchronized and all lights in the group dim up to 100%.

This means there is no need for any additional synchrony wire in larger installations.

We recommend the number of controllers connected to a push switch does not exceed 25 pieces,

The maximum length of the wires from push to controller should be no more than 20 meters.

The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching

(momentary) wall switchs.

30m 30m

Zone 4

RF remote

Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m,

as long as there is a receiver within 30m, the remote control distance can be limitless.

Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled

by the same remote.

Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.

Strong signal sources such as WiFi routers and microwave ovens will affect the range.

We recommend for indoor applications that receiver placements should be no further apart than15m.

30m

30m30m

V1 Single Color LED Controller

User Manual Ver 1.0.2 Page 3

V1 Single Color LED Controller

Malfunctions Analysis & Troubleshooting

Malfunctions

Causes Troubleshooting

1. Output cable is too long.

2. Wire diameter is too small.

3. Overload beyond power supply capability.

4. Overload beyond controller capability.

1. Reduce cable or loop supply.

2. Change wider wire.

3. Replace higher power supply.

4. Add power repeater.

No response

from the remote

1. The battery has no power.

2. Beyond controllable distance.

3. The controller did not match the remote.

1. Replace battery.

2. Reduce remote distance.

3. Re-match the remote.

1. No power.

2. Wrong connection or insecure.

1. Check the power.

2. Check the connection.

No light

Uneven intensity

between front and

rear,with voltage drop

100

PWM duty(%)

50 60 70 80 90 100

Brightness(%)

10 20 30 40

Gamma=1.6

Dimming Curve

User Manual Ver 1.0.2 Page 4

Andere SKYDANCE Controller Handbücher

SKYDANCE

SKYDANCE R10 Bedienungsanleitung

SKYDANCE

SKYDANCE SC + R9 Bedienungsanleitung

SKYDANCE

SKYDANCE WT1 Bedienungsanleitung

SKYDANCE

SKYDANCE RT5 Bedienungsanleitung

SKYDANCE

SKYDANCE DSA Bedienungsanleitung

SKYDANCE

SKYDANCE V4-WPS Bedienungsanleitung

SKYDANCE

SKYDANCE R11 Bedienungsanleitung

SKYDANCE

SKYDANCE T13 Bedienungsanleitung

SKYDANCE

SKYDANCE XC Bedienungsanleitung

SKYDANCE

SKYDANCE RGBW Bedienungsanleitung

SKYDANCE

SKYDANCE T1 Bedienungsanleitung

SKYDANCE

SKYDANCE V1-T Bedienungsanleitung

SKYDANCE

SKYDANCE KS Bedienungsanleitung

SKYDANCE

SKYDANCE V4-U Bedienungsanleitung

SKYDANCE

SKYDANCE T14 Bedienungsanleitung

SKYDANCE

SKYDANCE SC + R9 Bedienungsanleitung

SKYDANCE

SKYDANCE R6 Bedienungsanleitung

SKYDANCE

SKYDANCE V1-L Bedienungsanleitung

SKYDANCE

SKYDANCE VP Bedienungsanleitung

SKYDANCE

SKYDANCE C1 Bedienungsanleitung

SKYDANCE

SKYDANCE ES32-V Bedienungsanleitung

SKYDANCE

SKYDANCE T15 Bedienungsanleitung

SKYDANCE

SKYDANCE VD3 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung