Skyros VideoNet Bedienungsanleitung

ерсия 8.

Version 8.4

SKYROS Corporation VideoNet 8.4 User guide

This document is for information purposes only.

SKYROS Corporation offersno extra warrantiesconcerning information,

represented in this document.

VideoNet©,TinyVN4®, PowerVN4®, TitanVN8®,DVPack™ and corresponding

WindowsXPareregisteredtrademarksofMicrosoft

Corporation (of USA or other countries).

HASPis aregistered trademark of Aladdin Knowledge Systems Ltd.

Conexant, Fusion 878A, CX23880 are trademarks of Conexant Systems, Inc.

Intel and Pentium are registered trade marks and MMX is atrademark of Intel

Corporation.

All the other trade marks, brandsand product namesmentioned in thisdocument

aretrademarksoftheir respectiveowners.

VideoNet 8.4. Last revised and enlarged edition.

September 2008

SKYROS Corporation

6-B Grivtsova st., St.Petersburg, Russia

Phone: +7-812-448-1010

+7-812-448-1000

Fax: +7-812-448-1012

Web: [email protected]

www.videonet.ru

www.skyros.ru

SKYROS Corporation VideoNet 8.4 User guide

SKYROS CORPORATION END-USERSOFTWARE

AGREEMENT

IMPORTANT:READ CAREFULLYBEFORE INSTALLING, DOWNLOADING, OR

USING THESOFTWARE

This Software Agreement (“Agreement”) is between You (either an individual or an

entity), the EndUser,andSKYROSCorporation(“SKYROS“). The Agreement

authorises You to use the Software specified in Clause 1below,which may be

stored on aCD-ROM, sentto You byelectronicmail, or downloaded from SKYROS’s

Web pages or Servers or from other sources under the terms and conditions set

forth below.This is an agreement on end-user rights and not an agreement for

sale. SKYROS continues to own the copy of the Software and the physical media

containedin the sales package and anyother copy that You are authorised to

make pursuant to this Agreement.

ReadthisAgreement carefullybeforeinstalling,downloading,orusingtheSoftware.

By clicking on the “I Accept” button while installing, downloading, and/or using the

Software, You agree to the terms and conditions of this Agreement. If You do not

agreetoallofthe terms andconditionsof this Agreement, promptlyclickthe

“Decline” or “I Do Not Accept” button, cancel the installation or downloading, or

destroyorreturnthe Software andaccompanying documentation toSKYROS.

YOU AGREE THATYOUR USE OFTHESOFTWARE ACKNOWLEDGES THATYOU

HAVE READ THIS AGREEMENT,UNDERSTAND IT,AND AGREE TOBE BOUND

BYITS TERMSANDCONDITIONS.

1. SOFTWARE As used in this Agreement, the term “Software” means, collectively:

(i)the softwareproductidentifiedabove(ii)allthecontentsof the disk(s), CD-

ROM(s), electronic mail and its file attachments, or other media with which this

Agreement is provided, including the object code form of the software delivered

via aCD-ROM, electronic mail, or Web page (iii) digital images, stock photographs,

clipart, orotherartisticworks(“StockFiles”)(iv) relatedexplanatorywritten materials

and any other possible documentation related thereto (“Documentation”); (v) fonts,

and(vi)upgrades,modifiedversions, updates,additions, and copies oftheSoftware

(collectively “Updates”), if any,licensed to You by SKYROS under this Agreement.

2. END-USERRIGHTS AND USE.SKYROS grants You non-exclusive, non-

transferableend-userrights to installthe Softwareonthe local hard disk(s) or

other permanent storage media of onecomputer and use the Software on a

single computer or terminal at atime.

3. LIMITATIONS ON END-USER RIGHTS. You may not copy,distribute, or make

derivative works of the Software except as follows:

(a) You may make one copy of the Software on magnetic media as an archival

backup copy,provided Your archival backup copy is not installed or used on any

computer.Any other copies You make of the Software are in violation ofthis

Agreement.

(b) You may not use, modify,translate, reproduce, or transfer the right to use the

Software or copy the Software except as expressly provided in this Agreement.

(d)Youmaynotreverseengineer,reversecompile, disassemble,orotherwise

attempt to discover the source code of the Software (except to the extent that this

restriction is expressly prohibited by law) or create derivative works based on the

SKYROS Corporation VideoNet 8.4 User guide

Software.

(e) Unless stated otherwise in the Documentation, You shall not display,modify,

reproduce, or distribute any of the Stock Files included with the Software. In the

event that the Documentation allows You to display the Stock Files, You shall not

distribute the Stock Files on astand-alone basis, i.e., in circumstances in which

the Stock Files constitute the primary value of the product being distributed. You

should review the “Readme” files associated with the Stock Files that You use to

ascertain what rights You have with respect to such materials. Stock Files may not

be used inthe production of libelous, defamatory,fraudulent, infringing,lewd,

obscene, or pornographic material or inany otherwise illegal manner.You may

not register or claim any rights in the Stock Files or derivative works thereof.

(f) You agree that You shall only use the Software in amanner that complies with

all applicable laws in the jurisdiction in which You use the Software, including, but

notlimitedto,applicablerestrictionsconcerningcopyright andotherintellectual

property rights.

4. COPYRIGHT.The Software and all rights, without limitation including proprietary

rights therein, are owned by SKYROS and/or its licensors and affiliates and are

protected by international treaty provisions and all other applicable national laws

of the country in which it is being used. The structure, organization, and code of the

Software are the valuable trade secrets and confidential information of SKYROS

and/or its licensors and affiliates. You must not copy the Software, except as set

forth inclause3(LimitationsOn End-UserRights). AnycopieswhichYouare

permitted to make pursuant to this Agreement must contain the same copyright

and other proprietary notices that appear on the Software.

5. MULTIPLE ENVIRONMENTSOFTWARE /MULTIPLE LANGUAGE SOFTWARE /

DUALMEDIASOFTWARE /MULTIPLE COPIES /UPDATES. Ifthe Software supports

multiple platforms or languages, if You receive the Software on multiple media, or

ifYou otherwise receive multiple copiesof the Software, the totalnumber of

computers onwhich all versions of the Software are installedshall beonecomputer.

You may not rent, lease, sublicense, lend, or transfer versions or copies of the

Software You do not use. If the Software is an Update to aprevious version of the

Software, You must possess valid end-user rights to such aprevious version in

order to use the Update, and You may use the previous version for ninety (90) days

after You receive the Update in order to assist You in the transition to the Update.

After such time You no longer have aright to use the previous version, except for

the sole purpose of enabling You to install the Update.

6. COMMENCEMENT& TERMINATION. This Agreement is effective from the first

date You install the Software. You may terminate this Agreement at any time by

permanently deleting, destroying, and returning, at Your own cost, the Software, all

backupcopies,andallrelatedmaterials provided bySKYROS.Your end-user

rights automatically andimmediately terminate withoutnotice from SKYROS if

You fail to comply with any provision of this Agreement. In such an event, You must

immediately delete, destroy,or return at Your own cost, the Software, all backup

copies, and all related material to SKYROS.

7. YOU ACKNOWLEDGETHATTHE SOFTWAREIS PROVIDED“ASIS” WITHOUT

WARRANTYOF ANYKIND, EXPRESS OR IMPLIED, AND TOTHE MAXIMUM

EXTENTPERMITTEDBYAPPLICABLELAWNEITHER SKYROS, ITSLICENSORS

OR AFFILIATES,NOR THECOPYRIGHTHOLDERS MAKE ANY

SKYROS Corporation VideoNet 8.4 User guide

REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

BUTNOTLIMITED TOTHEWARRANTIES OFMERCHANTABILITYOR FITNESS

FORAPARTICULAR PURPOSE ORTHATTHE SOFTWARE WILLNOTINFRINGE

ANYTHIRD PARTYPATENTS,COPYRIGHTS,TRADEMARKS,OR OTHER RIGHTS.

THERE IS NO WARRANTYBYSKYROS OR BYANYOTHER PARTYTHATTHE

FUNCTIONS CONTAINEDINTHE SOFTWAREWILLMEETYOUR

REQUIREMENTS ORTHATTHE OPERATION OF THE SOFTWARE WILLBE

UNINTERRUPTEDOR ERROR-FREE.YOU ASSUME ALLRESPONSIBILITYAND

RISK FORTHE SELECTION OF THE SOFTWARE TOACHIEVE YOUR INTENDED

RESULTSAND FORTHE INSTALLATION,USE,AND RESULTS OBTAINEDFROM

IT.

8. NO OTHER OBLIGATIONS. This Agreement creates no obligations on the part

of SKYROS other than as specifically set forth herein.

9. LIMITATIONOFLIABILITY.TOTHEMAXIMUMEXTENTPERMITTED BY

APPLICABLE LAW,INNOEVENTSHALLSKYROS,ITSEMPLOYEESOR

LICENSORS OR AFFILIATES BE LIABLE FOR ANY LOST PROFITS, REVENUE,

SALES, DATA, OR COSTS OF PROCUREMENTOF SUBSTITUTE GOODS OR

SERVICES,PROPERTYDAMAGE,PERSONALINJURY,INTERRUPTIONOF

BUSINESS,LOSS OF BUSINESS INFORMATION,ORFORANYSPECIAL, DIRECT,

INDIRECT,INCIDENTAL, ECONOMIC,COVER, PUNITIVE, SPECIAL,OR

CONSEQUENTIALDAMAGES, HOWEVER CAUSED AND WHETHER ARISING

UNDER CONTRACT,TORT, NEGLIGENCE, OR OTHER THEORY OF LIABILITY

ARISINGOUTOFTHE USE OF ORINABILITY TOUSETHE SOFTWARE,EVEN IF

SKYROSORITS LICENSORSOR AFFILIATESARE ADVISEDOFTHE POSSIBILITY

OFSUCH DAMAGES.

Nothingcontained inthis Agreementshall prejudice the statutoryrightsof any

party dealing as aconsumer.Nothing contained in this Agreement limits SKYROS’s

liability to You in the event of death or personal injury resulting from SKYROS’s

negligence. SKYROS is acting on behalf of its employees and licensors or affiliates

for the purpose of disclaiming, excluding, and/or restricting obligations, warranties,

and liability as provided in this clause 9, but in no other respects and for no other

purpose.

10. TECHNICALSUPPORT.SKYROS hasno obligation tofurnish Youwith technical

support unless separately agreed in writing between You and SKYROS. Technical

support is granted only to registered users.

11. NOTICES. All notices and return of the Software and Documentation should be

delivered to:

6, Grivtsova st., 190000, Saint-Petersburg, Russia, SKYROS Corporation

12.APPLICABLELAW&GENERALPROVISIONS

This Agreement is governed by the laws of Russia. If any part of this Agreement is

found void and unenforceable, it will not affect the validity of the balance of the

Agreement, which shall remain valid and enforceable according to its terms. This

Agreement may only be modified in writing by an authorised officer of SKYROS.

This is the entire agreement between SKYROS and You relating to the Software,

andit supersedes any priorrepresentations, discussions, undertakings,end-

user agreements, communications, or advertising relating to the Software.

PLEASE SUBMITANYACCOMPANYING REGISTRATION FORMS TORECEIVE

REGISTRATIONBENEFITS WHERE APPLICABLE.

SKYROS Corporation VideoNet 8.4 User guide

CONTENTS

SKYROS CORPORATION END-USERSOFTWARE AGREEMENT........................................2

PREFACE.............................................................................................................................12

ABOUT THE SYSTEM.........................................................................................................12

1. VIDEONET.BRIEFOVERVIEW........................................................................................13

2. START WORKINGWITH VIDEONET...............................................................................16

2.1. Technical requirements.............................................................................................16

2.2. Installation and initial configuration of VideoNet.......................................................18

2.3. VideoNet license.......................................................................................................22

•Limitation on amount of PowerVN8 cards............................................23

•Limitation on amount of TitanVN16 cards.............................................24

•External systems...................................................................................24

3.SETUPOF VIDEONET SYSTEMCONFIGURATIONPARAMETERS..............................25

3.1. Devices. Working with Devices panel......................................................................27

3.1.1. Devices. Introduction.......................................................................................27

3.1.1.1. Types of devices................................................................................28

3.1.2. Working with Devices panel...........................................................................31

3.1.2.1. Menu and toolbar..............................................................................31

3.1.2.2.Adding devices intosystem configuration........................................32

• Automatic device adding........................................................................33

•Manual device adding.............................................................................35

3.1.2.3.Removing devices from system configuration.................................37

3.1.2.4.Device parameters configuring........................................................38

3.1.2.5.Video/audiocapturecards................................................................40

•Video/audio capture cards with Bt8xx chips........................................40

•Video/audio capture cards with Cx2388 chips...................................45

•New generation cards...........................................................................47

•Multimedia video capture device............................................................47

•Multimedia audio capture device............................................................48

3.1.2.6. CCTV camera....................................................................................49

3.1.2.7.IP-camera..........................................................................................55

3.1.2.8.IP-server............................................................................................57

3.1.2.9. Camerascontrolling device..............................................................57

3.1.2.10. PanTiltcontrollers..........................................................................59

•Pan Tilt controller for COM-port..............................................................59

•Pan Tilt controller for IP-camera.............................................................60

•Pan Tilt controller through external device.............................................61

3.1.2.11. Microphone......................................................................................63

3.1.2.12.System controller............................................................................64

3.1.2.13. SW RS videoswitch.........................................................................65

3.2. Detection. Working with Detection panel..................................................................66

3.2.1. Detectors, detection presets and detection zones........................................66

•Video detectors......................................................................................66

•Audio detectors......................................................................................68

3.2.2. Working with Detection panel.........................................................................69

3.2.2.1.Detection setup buttons....................................................................71

3.2.2.2. Creating detection presetsbycamera.............................................71

3.2.2.3. Configuring and testing motion detection zone

parameters.........................................................................................74

3.2.2.4.Configuring and testing left objectsdetection zone parameters....76

3.2.2.5. Objects sizeand aspectration configuring....................................79

3.2.2.6.Configuring and testing motion detection zone parameters

of adaptive objects detector.............................................................81

3.2.2.7.Configuring and testing detection zone parametersof objects

counter..............................................................................................83

SKYROS Corporation VideoNet 8.4 User guide

3.2.2.8.Configuring and testing detection parameters of sabotage

detector..............................................................................................85

3.2.2.9. Renaming detection presetsbycamera..........................................86

3.2.2.10. Removing camera detection presets..............................................86

3.2.2.11.Creating audiodetection presets....................................................86

3.2.2.12. Configuring and testing audio detection parameters.....................87

3.2.2.13. Renaming audio detection presets.................................................88

3.2.2.14. Removing audio detection presets.................................................88

3.2.3. Examples of configuring motion detection......................................................89

3.3. Screen. Working with Screen panel........................................................................91

3.3.1. Screen.............................................................................................................91

3.3.2. Working with Screen panel.............................................................................93

3.3.2.1. Configuring monitors.........................................................................93

3.3.2.2.Configuringspot-channel..................................................................94

3.3.2.3. Creating monitor modes....................................................................96

3.3.2.4.Configuring windowsdimensionsand positions............................101

3.3.2.5. Removing windows from monitor mode..........................................103

3.3.2.6. Export and import of the monitor modes........................................104

3.3.2.7. Sorting monitor modes in mode panel list......................................105

3.3.2.8. Removing monitor mode from system configuration.....................105

3.3.2.9. Requirements to video memory size for effective working in video

surveillancemode..........................................................................105

3.3.3.Sequences....................................................................................................106

3.3.4. User events...................................................................................................108

3.3.5. Examples of working with Screen panel......................................................110

3.4. Pan Tilt. Working with Pan Tilt panel.......................................................................114

3.4.1. Pan Tilt. Introduction......................................................................................114

3.4.2. Working with Pan Tilt panel...........................................................................115

3.4.2.1. Adding Pan Tilt presets...................................................................116

3.4.2.2.Changing Pan Tiltpresetsparameters..........................................119

3.4.2.3. Adding new patrol program.............................................................120

3.4.2.4.Testingpatrolprograms..................................................................122

3.4.2.5. Changing patrolprogram parameters............................................122

3.4.2.6. Removing Pan Tilt preset from system configuration....................122

3.4.2.7. Removing Pan Tilt preset from patrol program..............................123

3.4.2.8. Removing patrol program................................................................123

3.4.2.9.Configuringcamera internal parameters.......................................123

3.5. Recording. Working with Recording panel.............................................................125

3.5.1. Recording and Archiving. Introduction..........................................................125

3.5.1.1. Recording. Basic concepts.............................................................126

3.5.1.2. Archiving. Basicconcepts..............................................................132

3.5.1.3.Methodsofcompression.................................................................133

3.5.2. Working with Recording panel......................................................................136

3.5.2.1.Volumes creation............................................................................141

3.5.2.2. Adding new volume component......................................................144

3.5.2.3.Adding existing volumes.................................................................145

3.5.2.5. Information about volume................................................................147

3.5.2.4.Removing volumes from system configuration..............................147

3.5.2.6.Addingrecordingfunctions.............................................................149

3.5.2.7. Configuringrecordingfunction parameters...................................153

•DVPack 1.42 camera selected as asource........................................153

•DVPack 2camera selected as asource.............................................154

•IP-camera or IP-server camera selected as asource.........................156

•Microphone selected as asource.......................................................157

3.5.2.8. Adding sources to recording function...........................................158

3.5.2.9. Removing sources from recording function..................................160

SKYROS Corporation VideoNet 8.4 User guide

3.5.2.10.Removing recording function........................................................160

3.5.2.11.Addingandconfiguring pre-recordingfunction

parameters....................................................................................160

3.5.2.12. Record types. Adding and configuring.........................................161

3.5.2.13. Configuring correspondence between events and record types.163

3.5.2.14. Adding asource to more than one recording functions...............163

3.5.2.15. Configuring general recordingparameters..................................164

3.5.2.16.Configuringemergency recordingparameters............................165

3.5.2.17.Archiving function adding..............................................................168

3.5.2.18.Configuringgeneralarchivingfunctionparameters....................173

3.5.2.19. Adding new sources to archiving function..................................174

3.5.2.20.Removing sourcesfrom archiving function.................................176

3.5.2.21. Adding time intervals to archiving function..................................176

3.5.2.22.Configuring time intervalparameters...........................................177

3.5.2.23. Removing time intervals from archiving function.........................179

3.5.2.24.Removing archiving function........................................................179

3.5.3. Examples of working with Recording panel.................................................180

3.6.Access.Working withAccess panel.....................................................................186

3.6.1.Access.Introduction.....................................................................................186

3.6.2. Working with Access panel..........................................................................186

3.6.2.1. Adding, removing and configuring users in VideoNet

system............................................................................................187

•Requirements to user parameters setup for correct working with the

system..................................................................................................189

3.6.2.2. Adding, removing and configuring groups in VideoNet system....189

3.6.2.3.Policy configuring............................................................................192

3.6.2.4. Configuring security parameters....................................................196

3.6.2.5.Configuring access todevices.......................................................197

•Setup of access to Panasonic WV-CU550 cj system controller and

authorization in the system..................................................................198

•Setup of access to Panasonic WV-CU650 system controller and

authorization in the system..................................................................199

3.6.2.6. Creating reports on access to devices..........................................201

3.6.3. Examples of working with Access panel.....................................................202

3.7. Scheduler.Working with Scheduler panel.............................................................204

3.7.1. Scheduler.Introduction..................................................................................204

3.7.2. Working with Scheduler panel......................................................................205

3.7.2.1. Menu and toolbar............................................................................205

3.7.2.2. Adding tasks tosystem configuration............................................206

3.7.2.3. Adding events into atask................................................................207

3.7.2.4. Adding reactions into atask...........................................................207

3.7.2.5. Adding conditions into atask.........................................................208

3.7.2.6. Configuring decision-making algorithmbyconditions

folder...............................................................................................209

3.7.2.7.Copying tasks,events,reactions and conditions..........................210

3.7.2.8.Events,reactionsand conditionsconfiguring................................211

3.7.2.9.Locking and removing tasks,events,reactionsand conditions...211

3.7.2.10. Events types..................................................................................213

•Event from detector by camera............................................................213

•Event from objects counter..................................................................215

•Exceed of audio signal volume detected.............................................216

•Time interval..........................................................................................216

•Input video signal loss..........................................................................217

•Network connection loss.....................................................................218

•Networkconnection restoring..............................................................218

•Notification from remote computers.....................................................219

SKYROS Corporation VideoNet 8.4 User guide

•System error.........................................................................................220

•User event............................................................................................220

•Sensors signal......................................................................................221

•Command from system controller........................................................222

•Event of the Event Log.........................................................................223

•External system event..........................................................................225

• Alarm by guarded object......................................................................225

•Stop recording......................................................................................227

3.7.2.11.Reactions types.............................................................................227

•Video/audio data recording..................................................................227

•Video/audio data pre-recording...........................................................228

•Stop pre-recording...............................................................................228

•Data archiving.......................................................................................229

•Alarm message.....................................................................................230

•Sound message....................................................................................230

•Send e-mail...........................................................................................231

•Notification of remote computers.........................................................232

•Hardware control of the operability.....................................................233

•Change arming state............................................................................234

•Arming...................................................................................................235

•Relay outputs controlling......................................................................235

•Pan Tilt device controlling.....................................................................236

•Monitors modes and windows controlling...........................................237

•Enable detectors..................................................................................238

•Load detector preset............................................................................239

•Reaction of objects counter.................................................................240

•Pause....................................................................................................241

•Launch of external application.............................................................242

•Save frame...........................................................................................243

•External system reaction......................................................................244

3.7.2.12.Conditionstypes............................................................................245

•Time interval..........................................................................................245

•Network connection state....................................................................245

•Arming state..........................................................................................246

3.7.3. Examples of working with Scheduler panel.................................................247

3.8.Network..................................................................................................................252

3.8.1. Network and computers. Introduction...........................................................252

3.8.2. Working with computers...............................................................................253

3.8.2.1. Adding computers...........................................................................253

3.8.2.2. Changing computers view in the computer list..............................257

3.8.2.3.Renaming computer........................................................................258

3.8.2.4. Removing computer from configuration.........................................258

3.8.2.5.Adjusting computers time synchronization withcorrecttime

server.................................................................................................258

3.8.3. Working with Network panel.........................................................................260

3.8.3.1. Configuringoutgoing connections..................................................262

3.8.3.2. Configuringincomingconnections.................................................265

3.8.3.3.Configuringroutingparameters......................................................266

3.8.3.4. Configuring Firewall parametersfor working with

VideoNet..........................................................................................271

3.8.3.5.Configuring parametersforworking through web-access............275

3.8.4. Examples of working with Network panel....................................................277

3.9. Exporting and Importing configuration....................................................................283

3.10. Network matrix.....................................................................................................286

3.10.1. Network matrix configuring.........................................................................286

3.10.2. Authorization and controlling network matrix monitors...............................287

SKYROS Corporation VideoNet 8.4 User guide

3.11. Graphic plans........................................................................................................290

3.11.1. Configuring graphic plans...........................................................................291

3.11.1.1. Plans constructing.........................................................................292

3.11.1.2.Plansconnecting...........................................................................295

3.12. Processing. Work With Processing Panel............................................................297

3.12.1. Blind zones..................................................................................................297

3.12.2. Working with Processing panel..................................................................297

3.12.2.1. Adding blind zone........................................................................298

3.12.2.2.Editing blind zone.........................................................................299

3.12.2.3. Deleting blind zones.....................................................................299

3.12.2.4. Overlaying blind zones on the video image.................................300

3.13. System..................................................................................................................301

3.13.1. Configuring system general parameters....................................................301

4. WORKING WITH VIDEONET SYSTEM..........................................................................302

4.1. Working with mode panel.......................................................................................304

4.1.1. Player.............................................................................................................306

4.1.1.1. Player window interface...................................................................307

4.1.1.2. Selecting sourcesfor playback and controlling playback

lists.................................................................................................313

4.1.1.3.Records filtering..............................................................................315

4.1.1.4.Cameras distribution in video windowsfor playback....................316

4.1.1.5. Video/audio recordsplaybackinthe player..................................318

4.1.1.6. Clip export.......................................................................................320

•Creating video clip...............................................................................320

•Creating audio clip...............................................................................325

•Creating audio/video clip on CD/DVD...................................................329

•Quick clip export...................................................................................330

4.1.1.7.Video/audio recordsarchiving........................................................331

4.1.1.8.Removing video/audiorecords.......................................................335

4.1.1.9. Protecting and unprotecting file of video/audio record..................335

4.1.2. Sound............................................................................................................336

4.1.2.1.Sound translating from microphone...............................................337

4.1.2.2. Emergencysound recording from microphone..............................337

4.1.2.3. Sound playbackfrom microphone..................................................338

4.1.3. Arm................................................................................................................339

4.1.4. Controlling relay outputs...............................................................................340

4.1.5. Commands: user events...............................................................................341

4.1.6. Alarm message..............................................................................................341

4.1.7. Long-term operations....................................................................................343

4.1.8. Options..........................................................................................................349

4.1.9. Clock..............................................................................................................349

4.1.10. Exit...............................................................................................................350

4.2.Working withvideo window..................................................................................352

4.2.1. Viewing list of cameras, sequences and user’s view setup......................353

4.2.2. Translating video from camera.....................................................................355

4.2.3. Translating video via network. Controlling quality........................................357

4.2.4.Switchingbetweencamerasinvideowindow............................................359

4.2.5. Synchronous audio accompaniment.............................................................360

4.2.6. Emergency video recording..........................................................................361

4.2.7. Emergency video replay...............................................................................362

4.2.8. Video playback in video window..................................................................363

4.2.9.Switching tofull-screen mode of video window.........................................364

4.2.10. Processing video image in video window..................................................364

4.2.11. Printing image from video window..............................................................366

4.2.12. Export video from video window................................................................367

4.2.13. Controlling Pan Tilt in video window...........................................................369

Inhaltsverzeichnis

Andere Skyros Sicherheitssystem Handbücher

Skyros

Skyros VideoNet 9.1 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung