SkyWave SG-7100 Montageanleitung

SG-7100

Hardware Guide

T300, Version 01

The electronic version of this document allows

you to use the built-in Hyperlinks and

bookmarks when using Adobe Reader

Nov 2014

SG-7100 - Hardware Guide

T300, Version 01 ii © SkyWave Proprietary

Legal Notice

This documentation is owned by SkyWave Mobile Communications Inc. (SkyWave) and protected by

applicable copyright laws and international treaty provisions. Other copyrighted names used are the property

of their respective owners. Therefore, you must treat this documentation like any other copyrighted material.

You may not make the documentation, or copies thereof, available in any manner or form, or use, copy or

transfer any part, to anyone outside your company.

If you received this documentation by electronic transmission or download, by installation or use of the

documentation, you acknowledge that you have read and understand this license agreement and agree to be

bound by its terms and conditions.

This documentation is provided on an as-is basis without any warranty of any kind. You assume the entire

risk as to the results or performance of the software. Under no circumstance shall SkyWave be held liable for

any direct, indirect, consequential, or incidental damages arising from the use or inability to use the software

or documentation.

All trademarks or registered trademarks are the property of their respective owners. INMARSAT, the

Inmarsat logo and IsatData Pro are trademarks of Inmarsat used under license by SkyWave. Inmarsat is not

responsible for the operation and regulatory compliance of the products and services referred to in this

document that connect to the Inmarsat system. Wi-Fi is a registered trademark of Wi-Fi Alliance. 1-Wire is a

registered trademark of Maxim Integrated™ Products Inc. Micro-Fit 3.0 is a Molex trademark. gpsOneXTRA

Assistance is a trademark of Qualcomm Incorporated. Loctite and Threadlocker Blue 242 are registered

trademarks of Henkel.

Option NV materials are reproduced with permission of the copyright owner.

SkyWave reserves the right to make changes to products and or specifications without notice.

Contact Information

SkyWave Mobile Communications Inc.

Online:

Website www.SkyWave.com

Online Documentation:

Login at support.skywave.com and follow the link to the downloads section

Customer Support by Email:

support@skywave.com

Customer Support by Telephone:

+1.613.836.2222

Documentation Feedback:

The Customer Documentation Department creates the SkyWave technical manuals.

Use the address below to tell us what you think about our technical documentation

and if you have suggestions for improvement.

In your feedback please reference a specific document number or title. We read all

feedback carefully, but please note that we cannot respond to the comments you

submit. If you require technical assistance, please contact SkyWave Customer

Support.

documentation@skywave.com

SG-7100 - Hardware Guide

TABLE OF CONTENTS

Legal Notice....................................................................................................................................ii

Contact Information......................................................................................................................ii

List of Figures............................................................................................................................... vi

List of Tables................................................................................................................................ vii

Preface........................................................................................................................................... ix

Purpose ........................................................................................................................................ ix

Audience...................................................................................................................................... ix

Errata Sheet.................................................................................................................................. ix

Notation ....................................................................................................................................... ix

Reference..................................................................................................................................... ix

Safety Disclaimer.......................................................................................................................... x

Safety Precautions......................................................................................................................... x

Installation Warning ..................................................................................................................... x

Installer Responsibility................................................................................................................. x

Limited Liability.......................................................................................................................... xi

Warranty...................................................................................................................................... xi

1Product Overview ............................................................................................................... 1

1.1 Key Features and Benefits.................................................................................................. 1

1.2 SG-7100 Components ........................................................................................................ 2

1.2.1 Base Unit....................................................................................................................... 2

1.2.1.1 Front Panel ........................................................................................................................... 3

1.2.1.2 Back Panel............................................................................................................................ 3

1.2.2 Expansion Cards............................................................................................................ 4

1.2.2.1 WLAN/Wi-Fi Expansion Card............................................................................................. 4

1.2.2.2 Simplex Serial Expansion Card............................................................................................ 4

1.2.2.3 Industrial Expansion Card.................................................................................................... 5

1.2.2.4 Telematics Expansion Card.................................................................................................. 5

1.2.3 Antennas........................................................................................................................ 5

1.2.3.1 Cellular Antenna .................................................................................................................. 5

1.2.3.2 Cellular plus GPS Antenna................................................................................................... 6

1.2.3.3 WLAN (Wi-Fi) Antenna Fixed............................................................................................ 6

1.2.3.4 WLAN (Wi-Fi) Antenna Hinged ......................................................................................... 6

1.2.4 Software Bundles.......................................................................................................... 7

2Specifications....................................................................................................................... 8

2.1 Temperature........................................................................................................................ 8

2.2 Electrical............................................................................................................................. 8

2.2.1 Power Supply................................................................................................................ 8

2.2.1.1 Load Dump Protection ......................................................................................................... 8

2.2.1.2 Base Unit Internal Power Supply ......................................................................................... 8

2.2.2 SIM Card Holders......................................................................................................... 9

2.2.3 Power Consumption...................................................................................................... 9

2.2.3.1 Accelerometer Power Consumption..................................................................................... 9

2.3 Processor and Operating System...................................................................................... 10

2.4 Memory............................................................................................................................ 10

2.5 Environmental.................................................................................................................. 10

SG-7100 - Hardware Guide

T300, Version 01 iv © SkyWave Proprietary

2.6 Physical Details................................................................................................................ 11

2.7 Ethernet Interface............................................................................................................. 12

2.8 Status Indicators............................................................................................................... 12

2.9 WWAN (Cellular) Interface............................................................................................. 14

2.10 GPS................................................................................................................................... 14

2.11 Satellite (optional)............................................................................................................ 14

2.12 Antennas........................................................................................................................... 15

2.12.1 Cellular Antenna ......................................................................................................... 15

2.12.2 Cellular plus GPS Antenna ......................................................................................... 15

2.12.3 WLAN (Wi-Fi) Antenna............................................................................................. 16

2.13 Expansion Cards - Serial Interfaces ................................................................................. 17

2.13.1 WLAN/Wi-Fi Expansion Card.................................................................................... 17

2.13.2 Simplex Serial Expansion Card................................................................................... 18

2.13.3 Industrial Serial Card .................................................................................................. 19

2.13.4 Telematics Card .......................................................................................................... 21

2.13.4.1 RS-232 ................................................................................................................................22

2.13.4.2 Input/Output ........................................................................................................................23

2.13.4.3 Default Jumpers Configuration ...........................................................................................25

2.13.4.4 RS-485 Jumper Configuration.............................................................................................26

2.13.4.5 Connectors...........................................................................................................................26

2.14 Accelerometer Sensors..................................................................................................... 26

2.14.1.1 Accelerometer Operating Modes.........................................................................................27

2.14.1.2 Sampling Rates....................................................................................................................28

3Installation......................................................................................................................... 29

3.1 Getting Started.................................................................................................................. 29

3.2 Prepare for the Installation ............................................................................................... 29

3.2.1 Tools Required............................................................................................................ 29

3.2.2 Shipping Box Contents ............................................................................................... 29

3.2.3 Mobile ID.................................................................................................................... 30

3.3 Install the SIM Card (optional) ........................................................................................ 30

3.3.1 Insert a Single SIM Card............................................................................................. 31

3.3.2 Insert Multiple SIM Cards .......................................................................................... 32

3.4 Install Expansion Cards (optional)................................................................................... 33

3.5 Attach the Antennas ......................................................................................................... 33

3.6 Determine a Suitable Mounting Location ........................................................................ 34

3.7 Mount the SG-7100.......................................................................................................... 35

3.7.1 Required Materials...................................................................................................... 35

3.7.2 Determine Terminal Orientation for Accelerometer Use............................................ 35

3.7.3 Mount the Unit............................................................................................................ 35

3.8 Connect an IDP Terminal (optional)................................................................................ 36

3.9 Connect to Power ............................................................................................................. 36

3.10 Route the Main Cable....................................................................................................... 36

3.11 Protect the Cables and Power Connector ......................................................................... 37

3.12 Configure and Register the SG-7100 ............................................................................... 37

4Compliance........................................................................................................................ 38

APPENDIX A Orderable Part Numbers ............................................................................... 39

APPENDIX B IDP Power and Serial Cable Pin-out............................................................. 40

Revision History .......................................................................................................................... 41

SG-7100 - Hardware Guide

Acronyms/Glossary..................................................................................................................... 42

Index… ......................................................................................................................................... 43

SG-7100 - Hardware Guide

T300, Version 01 vi © SkyWave Proprietary

List of Figures

Figure 1 SG-7100 ........................................................................................................................ 1

Figure 2 SG-7100 Base Unit ....................................................................................................... 2

Figure 3 SG-7100 Front Panel..................................................................................................... 3

Figure 4 SG-7100 Back Panel..................................................................................................... 4

Figure 5 WLAN/Wi-Fi Expansion Card...................................................................................... 4

Figure 6 Simplex Serial Expansion Card..................................................................................... 4

Figure 7 Industrial Expansion Card............................................................................................. 5

Figure 8 Telematics Expansion Card........................................................................................... 5

Figure 9 Cellular Antenna ........................................................................................................... 5

Figure 10 Cellular/GPS Antenna ................................................................................................. 6

Figure 11 WLAN (Wi-Fi) Antenna - Fixed................................................................................. 6

Figure 12 WLAN (Wi-Fi) Antenna - Hinged .............................................................................. 6

Figure 13 SG-7100 Side View Dimensions (mm)..................................................................... 11

Figure 14 SG-7100 Top View Dimensions (mm)...................................................................... 11

Figure 15 Ethernet Pin-out......................................................................................................... 12

Figure 16 LEDs.......................................................................................................................... 12

Figure 17 Sample SSID Label ................................................................................................... 17

Figure 18 Simplex Serial Expansion Card................................................................................. 18

Figure 19 Simplex Serial Expansion Card RS-232 Serial Connector (female) ......................... 18

Figure 20 SG-7100 Connected with a DTE Device................................................................... 19

Figure 21 SG-7100 Connected with a DCE Device .................................................................. 19

Figure 22 Industrial Expansion Card......................................................................................... 19

Figure 23 Industrial Serial Card RS-232 Serial Connector Pin-out (female) ............................ 20

Figure 24 Telematics Card......................................................................................................... 21

Figure 25 RS-232 Connector (male).......................................................................................... 22

Figure 26 Telematics Pin Outs................................................................................................... 23

Figure 27 Jumpers...................................................................................................................... 25

Figure 28 Sample Mobile ID ..................................................................................................... 30

Figure 29 Remove Panel............................................................................................................ 31

Figure 30 Remove the SIM Card............................................................................................... 31

Figure 31 Insert SIM Card......................................................................................................... 32

Figure 32 Telematics Card SIM Card Holder Location............................................................. 32

Figure 33 Attach Antennas ........................................................................................................ 34

Figure 34 Accelerometer and Terminal Orientation.................................................................. 35

Figure 35 Power Connector....................................................................................................... 36

Figure 36 Cable Management.................................................................................................... 37

Figure 37 IDP Power and Serial Cable...................................................................................... 40

SG-7100 - Hardware Guide

List of Tables

Table 1 Temperature Ratings..................................................................................................... 8

Table 2 Power Connector Pin-out (facing view of cable connector) ......................................... 8

Table 3 Accelerometer Power Consumption Factors................................................................. 9

Table 4 Supported Sleep Phase Durations. .............................................................................. 10

Table 5 SG-7100 Mass and Materials...................................................................................... 12

Table 6 LED Descriptions........................................................................................................ 13

Table 7 Ethernet LEDs............................................................................................................. 14

Table 8 Pin-out of Serial Connector......................................................................................... 18

Table 9 Pin-out of Serial Connector......................................................................................... 20

Table 10 RS-485 Pin-outs.......................................................................................................... 20

Table 11 Pin-out of RS-232 Serial Connector (male)................................................................ 22

Table 12 Default (RS-232) I/O Connector Pin-outs................................................................... 23

Table 13 RS-485 I/O Connector Pin-outs.................................................................................. 23

Table 14 Digital Inputs (Input1 to Input5)................................................................................. 24

Table 15 Optional Analog Inputs (Input1 to Input5) ................................................................. 24

Table 16 Analog Inputs (Input6 and Input7).............................................................................. 24

Table 17 Digital Outputs (Output8, Output9, Output13 and Output14) .................................... 25

Table 18 Default/Factory Jumper Settings*............................................................................... 25

Table 19 RS-485 Jumper Settings*............................................................................................ 26

Table 20 Accelerometer Power Modes...................................................................................... 27

Table 21 Sample Rates............................................................................................................... 28

Table 22 Orderable Part Numbers.............................................................................................. 39

Table 23 Wiring Chart................................................................................................................ 40

SG-7100 - Hardware Guide

T300, Version 01 viii © SkyWave Proprietary

THIS PAGE INTENTIONALLY LEFT BLANK

SG-7100 - Hardware Guide

Preface

Purpose

This document provides an overview of the installation procedures as well as hardware

characteristics and specifications for the SG-7100.

Audience

This document is for Solution Providers, system Integrators and Field Engineers. It

provides information to ensure successful installation and operation of the SG-7100.

Errata Sheet

Refer to the SkyWave Customer Support website for a possible Errata Sheet available

after the release of this document. Always check the site for the most current

documentation releases.

Notation

Hardware components and hardware labels in this document may not be exactly as shown

and are subject to change without notice.

CAUTION This safety symbol warns users of possible hazards to personnel,

to equipment, or to both. It includes hazards that will or can

cause severe personal injury, death, or substantial property

damage if the hazard is not avoided; and hazards that will or can

cause minor personal injury or property damage if the hazard is

not avoided.

Note: A note indicates information with no potential hazard, but the user should

make special note. A note is also used to indicate points of interest or to provide

supplementary information about a feature or task.

Numbered lists indicate a series of steps required to complete a task or function.

Bulleted lists highlight information where order or sequence is not crucial.

Reference

The content of the following documents may be useful in conjunction with this guide.

These documents are available from the IDP Toolkit or support.skywave.com.

[T200] IDP-680 Hardware Guide

[T212] IDP-280 Hardware Guide

[T301] SG-7100 API Reference

[T302] SG-7100 User Guide

SG-7100 - Hardware Guide

Safety Disclaimer

SkyWave makes no warranties, representations or guarantees that the products and

network services are suitable for any use in any hazardous environments requiring fail

safe performance (including without limitation marine safety and distress systems,

operation of nuclear facilities, aircraft navigation or communications systems, weapons

systems, air traffic control and life support services) or any other application in which the

failure of the products or network services could result in death or personal injury.

Solution Providers assume all liability associated with selling any products and network

services for any such applications, and Solution Provider will defend, indemnify, and

hold SkyWave harmless against any claims against SkyWave for loss, damage, liability,

or expense (including lawyers' fees) arising out of or related to the sale by Solution

Providers or any Solution Provider Reseller, or the user by any end user, of any product

or network service.

Please read all cautions and warnings throughout this document.

Safety Precautions

The terminal must comply with all safety precautions relating to the operation, usage,

service and repair of the terminal. SkyWave assumes no liability for the customer's

failure to comply with any of these precautions.

Caution warnings appear throughout this document.

Installation Warning

SkyWave recommends that this product be installed by the authorized distributor from

whom it has been purchased. By carrying out the installation of the product, the installer

assumes exclusive responsibility for, and agrees to indemnify SkyWave from, any injury

or damage of any kind arising from the installation.

Installer Responsibility

The installer is responsible for all injuries or damages arising out of or relating to any

wrongful or negligent act or omission of the installer (and/or any subcontractors) in

connection with the installation of any SkyWave product, except any such injuries or

damages arising solely from a defective SkyWave product. In addition to the liability

imposed upon the installer on the account of personal or property injury or damage,

bodily injury, including death, suffered as a result of the installer's wrongful or negligent

installation of any SkyWave product, the installer assumes the obligation to defend,

indemnify and hold SkyWave harmless, including its directors, officers, employees,

agents and assigns, and to indemnify SkyWave, including its directors, officers,

employees, agents and assigns, from and against every damage, expense, liability or

payment arising out of or relating to such wrongful or negligent act or omission,

including legal and court fees. The installer also agrees to defend, indemnify and hold

SkyWave harmless, including its directors, officers, employees, agents and assigns, from

and against any wrongful or negligent act or omission committed by any subcontractor or

other person employed by or under the supervision of the installer for any purpose in

connection with the installation of SkyWave products, and to indemnify SkyWave,

including its directors, officers, employees, agents and assigns, from every damage,

Inhaltsverzeichnis

Andere SkyWave Konferenzsystem Handbücher

SkyWave

SkyWave IDP-782 Montageanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung