SkyWave IDP-680 Montageanleitung

IDP 600 Terminal Series

Hardware Guide

T200, Version 02

The electronic version of this document allows

you to use the built-in Hyperlinks and

bookmarks when using Adobe Reader

IDP 600 Terminal Series - Hardware Guide

T200, Version 02 ii © SkyWave Proprietary

Legal Notice

This documentation is owned by SkyWave Mobile Communications Inc. (SkyWave) and protected by

applicable copyright laws and international treaty provisions. Other copyrighted names used are the property

of their respective owners. Therefore, you must treat this documentation like any other copyrighted material.

You may not make the documentation, or copies thereof, available in any manner or form, or use, copy or

transfer any part, to anyone outside your company.

If you received this documentation by electronic transmission or download, by installation or use of the

documentation, you acknowledge that you have read and understand this license agreement and agree to be

bound by its terms and conditions.

This documentation is provided on an as-is basis without any warranty of any kind. You assume the entire

risk as to the results or performance of the software. Under no circumstance shall SkyWave be held liable for

any direct, indirect, consequential, or incidental damages arising from the use or inability to use the software

or documentation.

All trademarks or registered trademarks are the property of their respective owners. INMARSAT, the

Inmarsat logo and IsatData Pro are trademarks of Inmarsat used under license by SkyWave. Inmarsat is not

responsible for the operation and regulatory compliance of the products and services referred to in this

document that connect to the Inmarsat system.

SkyWave reserves the right to make changes to products and or specifications without notice.

From www.SkyWave.com login, and follow the link to the downloads section. The complete Software and

Documentation License Agreement is distributed as a part of the IDP Developer Toolkit.

Contact Information

SkyWave Mobile Communications Inc.

Online:

Website www.SkyWave.com

Online Documentation:

Login at support.skywave.com and follow the link to the downloads section

Customer Support by Email:

support@skywave.com

Customer Support by Telephone:

+1.613.836.2222

IDP 600 Terminal Series - Hardware Guide

TABLE OF CONTENTS

Legal Notice....................................................................................................................................ii

Contact Information......................................................................................................................ii

List of Figures................................................................................................................................ v

List of Tables................................................................................................................................. vi

Preface..........................................................................................................................................vii

What's New?............................................................................................................................... vii

Purpose ....................................................................................................................................... vii

Audience..................................................................................................................................... vii

Notation ...................................................................................................................................... vii

Reference.................................................................................................................................... vii

Safety Disclaimer.......................................................................................................................viii

Safety Precautions......................................................................................................................viii

Installation Warning ..................................................................................................................viii

Limited Liability........................................................................................................................viii

Warranty...................................................................................................................................... ix

User Serviceable Parts................................................................................................................. ix

1Product Overview ............................................................................................................... 1

1.1 Overview of the Messaging System................................................................................... 1

1.2 Terminals............................................................................................................................ 2

1.3 Terminal Key Features and Benefits.................................................................................. 4

1.4 Pass-Through Mode ........................................................................................................... 5

1.5 Operating Modes................................................................................................................ 5

2Compliance.......................................................................................................................... 7

3Specifications....................................................................................................................... 9

3.1 Connector........................................................................................................................... 9

3.1.1 Connector Pin-out............................................................................................................ 9

3.2 Power................................................................................................................................ 10

3.2.1 Input Range.................................................................................................................... 10

3.2.2 Power Consumption....................................................................................................... 11

3.2.2.1 Average Power Consumption..............................................................................................11

3.2.3 Load Dump Circuitry..................................................................................................... 11

3.2.4 Fuse................................................................................................................................ 12

3.3 Input/Output..................................................................................................................... 12

3.3.1 Digital Input................................................................................................................... 13

3.3.2 Digital Output................................................................................................................ 14

3.3.3 Analog Input.................................................................................................................. 15

3.3.4 Input Bandwidth ............................................................................................................ 15

3.3.5 Output Bandwidth.......................................................................................................... 15

3.3.6 Pass-Through Mode....................................................................................................... 15

3.4 Serial Interfaces................................................................................................................ 17

3.4.1 RS-232........................................................................................................................... 17

3.4.2 RS-485/J1708 ................................................................................................................ 17

3.5 RF Specifications ............................................................................................................. 17

IDP 600 Terminal Series - Hardware Guide

T200, Version 02 iv © SkyWave Proprietary

3.5.1 Frequency ...................................................................................................................... 17

3.5.2 IDP-680 Antenna........................................................................................................... 18

3.5.3 IDP-690 Low Elevation Antenna .................................................................................. 18

3.6 GPS................................................................................................................................... 18

3.7 Physical Details................................................................................................................ 18

3.8 LED.................................................................................................................................. 20

3.9 Non-Volatile Storage........................................................................................................ 20

3.10 Environmental.................................................................................................................. 21

3.11 Temperature Sensor.......................................................................................................... 22

4Installation......................................................................................................................... 23

4.1 Getting Started.................................................................................................................. 23

4.2 Prepare for the Installation ............................................................................................... 23

4.2.1 Shipping Box Contents.................................................................................................. 24

4.2.2 Mobile Identification ..................................................................................................... 24

4.2.3 Contact SkyWave to Activate the Terminal .................................................................. 24

4.2.4 Required Materials......................................................................................................... 25

4.2.5 Required Tools............................................................................................................... 25

4.3 Identify the Fuse Panel Location...................................................................................... 26

4.4 Determine a Suitable Mounting Location ........................................................................ 26

4.5 Route the Main Cable....................................................................................................... 27

4.6 Mount the Terminal.......................................................................................................... 28

4.6.1 Drill Mounting Holes (optional).................................................................................... 29

4.6.2 Mount the Terminal....................................................................................................... 29

4.6.3 Apply Dielectric Grease................................................................................................. 30

4.7 Protect the Cables and Cable Connectors......................................................................... 31

4.8 Connect to Power ............................................................................................................. 32

4.9 Register the Terminal....................................................................................................... 33

4.10 Cleaning Instructions........................................................................................................ 34

4.11 Application Programming Interface................................................................................. 34

5Cable Assembly Instructions............................................................................................ 35

5.1 Required Tools and Materials .......................................................................................... 35

5.2 Cable Assembly Steps...................................................................................................... 35

6Troubleshooting the Terminal......................................................................................... 39

6.1 Terminal Does Not Register or Report............................................................................. 39

APPENDIX A Order Part Numbers....................................................................................... 41

APPENDIX B Activation Information................................................................................... 42

APPENDIX C IDP 600 Series Mating Cable......................................................................... 43

APPENDIX D IDP 600 Series to DMR-800 Adapter Cable................................................. 45

APPENDIX E IDP 600 Series Extension Cable..................................................................... 47

APPENDIX F Drill Template.................................................................................................. 50

Documentation Version............................................................................................................... 51

Acronyms/Glossary..................................................................................................................... 52

Index… ......................................................................................................................................... 53

IDP 600 Terminal Series - Hardware Guide

List of Figures

Figure 1 IDP-680 Model............................................................................................................ 1

Figure 2 SkyWave's IsatData Pro Network ............................................................................... 2

Figure 3 IDP-680 with Side Connector...................................................................................... 3

Figure 4 IDP-680 with Bottom Connector................................................................................. 3

Figure 5 IDP-690 with Side Connector...................................................................................... 4

Figure 6 IDP-690 with Bottom Connector................................................................................. 4

Figure 7 Pass-Through Mode..................................................................................................... 5

Figure 8 Terminal Connector Pin Assignment (Male)............................................................... 9

Figure 9 View of Terminal Male Connector............................................................................ 10

Figure 10 Face View of Mating Connector (Female)................................................................ 10

Figure 11 Rear View of Mating Connector (Solder Cups)........................................................ 10

Figure 12 Digital Input............................................................................................................... 13

Figure 13 Digital Output............................................................................................................ 14

Figure 14 Analog Input.............................................................................................................. 15

Figure 15 Pass-Through Mode Signals...................................................................................... 16

Figure 16 IDP-680 Top View Enclosure Dimensions (mm) ..................................................... 19

Figure 17 IDP-680 Side View Enclosure Dimensions (mm)..................................................... 19

Figure 18 IDP-680 and IDP-690 Bottom View Enclosure Dimensions (mm) .......................... 19

Figure 19 IDP-690 Side View Enclosure Dimensions (mm)..................................................... 20

Figure 20 Mobile ID Location................................................................................................... 24

Figure 21 Sample Activation Report ......................................................................................... 25

Figure 22 Sample Cable Placement in a Vehicle Cab ............................................................... 28

Figure 23 Bottom Connector and Side Connector (IDP-680 shown)........................................ 29

Figure 24 Location for Waterproof Sealing Compound............................................................ 30

Figure 25 Apply Silicone Lubricant to Connector..................................................................... 30

Figure 26 Key Slot..................................................................................................................... 31

Figure 27 Cable Connector and Locking Collar........................................................................ 31

Figure 28 Cable Management.................................................................................................... 32

Figure 29 LED Location............................................................................................................ 33

Figure 30 Basic Connector Parts for Soldering Configuration.................................................. 35

Figure 31 Recommended Stripping Length............................................................................... 35

Figure 32 Cable with Sealing Nut, Back Shell and Coupling Ring........................................... 36

Figure 33 Cable Grommet ......................................................................................................... 36

Figure 34 Red Gasket................................................................................................................. 36

Figure 35 Wires and Solder Cups.............................................................................................. 37

Figure 36 O-Ring over Connector Body.................................................................................... 37

Figure 37 Silicone in the Connector .......................................................................................... 37

Figure 38 Silicone in the Grommet............................................................................................ 38

Figure 39 Key Features in the Coupling Ring and Connector Body ......................................... 38

Figure 40 Cable Exit Area ......................................................................................................... 38

Figure 41 Assembled Sealing Nut ............................................................................................. 38

Figure 42 IDP 600 Series Mating Cable.................................................................................... 43

Figure 43 Face View of IDP 600 Series Mating Cable Connector............................................ 44

IDP 600 Terminal Series - Hardware Guide

T200, Version 02 vi © SkyWave Proprietary

Figure 44 IDP 600 Series to DMR-800 Adapter Cable............................................................. 45

Figure 45 IDP Connector End Pin-Out...................................................................................... 46

Figure 46 DMR-800 Mating Connector End Pin-Out ............................................................... 46

Figure 47 IDP 600 Series Extension Cable................................................................................ 47

Figure 48 Raw Cable Details..................................................................................................... 48

List of Tables

Table 1 IDP 600 Series Models................................................................................................ 3

Table 2 Terminal Connector..................................................................................................... 9

Table 3 Terminal Electrical Pin Assignment............................................................................ 9

Table 4 Power Consumption Values ...................................................................................... 11

Table 5 Power Consumption Scenarios.................................................................................. 11

Table 6 Pass-Through Mode I/O States.................................................................................. 16

Table 7 Pass-Through Mode Timing Specifications .............................................................. 16

Table 8 Pass-Through Mode Power Consumption................................................................. 16

Table 9 Order Part Numbers................................................................................................... 41

Table 10 IDP 600 Series Mating Cable Color Code................................................................. 44

Table 11 Cable Connector Pin-Out .......................................................................................... 46

Table 12 Cable Connector Pin-Out .......................................................................................... 48

IDP 600 Terminal Series - Hardware Guide

Preface

Note: Refer to the SkyWave Customer Support website for a possible Errata Sheet

available after the release of this document. Always check the site for the most

current documentation releases.

What's New?

Updates since the last release of this document are listed below.

Updated elevation angle for IDP-690 (-15 to +90) (Table 1)

Added power consumption information (Table 5)

Added new IDP 600 Series Extension Cable figure and updated details

(APPENDIX E)

Purpose

This document is as an overview of the installation procedures and hardware

characteristics and specifications for the IDP 600 series of terminals.

Audience

This document is for technical readers. It provides information to ensure successful

installation and operation of IDP 600 series terminals.

Notation

Hardware components and hardware labels in this document may not be exactly as shown

and are subject to change without notice.

CAUTION This safety symbol warns users of possible hazards to personnel,

to equipment, or to both. It includes hazards that will or can

cause severe personal injury, death, or substantial property

damage if the hazard is not avoided; and hazards that will or can

cause minor personal injury or property damage if the hazard is

not avoided.

Note: A note indicates information with no potential hazard, but the user should

make special note. A note is also used to indicate points of interest or to provide

supplementary information about a feature or task.

Numbered lists indicate a series of steps required to complete a task or function.

Bulleted lists highlight information where order or sequence is not crucial.

Reference

The content of the following documents may be useful in conjunction with this guide.

These documents are available from the IDP Developer Toolkit or support.skywave.com.

[T202] IDP 600 Terminal Series Developer Guide

IDP 600 Terminal Series - Hardware Guide

T200, Version 02 viii © SkyWave Proprietary

Safety Disclaimer

SkyWave makes no warranties, representations or guarantees that the products and

network services are suitable for any use in any hazardous environments requiring fail

safe performance (including without limitation marine safety and distress systems,

operation of nuclear facilities, aircraft navigation or communications systems, weapons

systems, air traffic control and life support services) or any other application in which the

failure of the products or network services could result in death or personal injury.

Solution Providers assume all liability associated with selling any products and network

services for any such applications, and Solution Provider will defend, indemnify, and

hold SkyWave harmless against any claims against SkyWave for loss, damage, liability,

or expense (including lawyers’ fees) arising out of or related to the sale by Solution

Providers or any Solution Provider Reseller, or the user by any end user, of any product

or network service.

Please read all cautions and warnings throughout this document.

Safety Precautions

The mobile device must comply with all safety precautions relating to the operation,

usage, service and repair of the terminal. SkyWave assumes no liability for the

customer’s failure to comply with any of these precautions.

Caution warnings appear throughout this document.

Installation Warning

SkyWave recommends that this product be installed by the authorized distributor from

whom it has been purchased. By carrying out the installation of the product, the installer

assumes exclusive responsibility for, and agrees to indemnify SkyWave from, any injury

or damage of any kind arising from the installation.

Limited Liability

SkyWave’s liability is limited to the cost of repair or replacement of any of SkyWave’s

products during the warranty period. To the maximum extent permitted by applicable

law, SkyWave's total liability for damages of any kind, whether based on breach of

contract, tort (including negligence), product liability, incidental, special, consequential,

indirect or similar damages with product application and usages will be limited to an

amount equal to the product's original price paid by the Purchaser to SkyWave and this

limitation of liability is reasonable given the price of SkyWave's products. In no event

will SkyWave be liable to the Purchaser, any resellers of the Purchaser or any end user

for any lost profits or savings, lost business, loss of data, any telecommunications

breakdown, unavailability, downtime, interruption or delay, any suspension of service by

any third party service provider including Inmarsat or any incidental, special, indirect, or

consequential damages, whether based on breach of contract, tort (including negligence),

product liability, incidental, special, consequential, indirect or similar damages and

whether or not SkyWave has been advised of the possibility of such occurrence or

damage. The parties agree that the foregoing represents a fair allocation of risk

hereunder.

IDP 600 Terminal Series - Hardware Guide

Warranty

SkyWave provides a manufacturer’s warranty to the original purchaser (Solution

Provider) that its products and services will perform in accordance with SkyWave’s

specifications and will be free from defects in material and workmanship for a limited

period of time. This warranty is limited to the repair and/or replacement of any defective

components experienced under normal specified operating use and storage conditions, at

SkyWave’s discretion. It does not cover any damages caused or associated with the

product’s misuse. The end-user’s only remedy or recourse is against the Solution

Provider, and any experience with defective products should be communicated to your

Solution Provider. Shipping of defective product, back to the Solution Provider will be in

accordance with the Solution Provider’s instructions and should be accompanied with a

fault report. SkyWave is not responsible for corrosion damage caused by improperly

assembled or installed cables. Warranty is void if unit is opened.

A fault report is required for each unit returned under warranty. Please contact

SkyWave’s Customer Support for additional information.

User Serviceable Parts

The terminals contain no user serviceable parts or replaceable fuses.

IDP 600 Terminal Series - Hardware Guide

THIS PAGE INTENTIONALLY LEFT BLANK

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SkyWave Touch-Terminal Handbücher

SkyWave

SkyWave IDP 800 Series Montageanleitung

SkyWave

SkyWave IDP 700 Series Montageanleitung

SkyWave

SkyWave IDP-782 Montageanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung