SLaudiolab SRS-200BM Bedienungsanleitung
1
Ver 1.0E
SRS-200BM
User’s Manual
(Bluetooth Mono Headset)
2
Safety Notices
zPrior to use, please read “Bluetooth Mono Headset user’s
manual”, carefully for its instructions and notices and use it
appropriately.
zPlease follow the instructions in order to prevent user’s risks
and property damages.
Warnings
zPlease do not damage the headset with a sharp object.
(such as nail, knife and scissors)
zPlease do not wet or soak headset in water.
zPlease do not let childrens or pets bite or suck the headset.
zPlease do not touch product with a wet hand.
zPlease do not use other battery chargers other than the battery
charger provided.
Cautions
zAvoid the direct ray of light or a hot and humid place.
(e.g., spa and sauna)
zDo not put in or near a thermic appliance such as heater and
microwave.
(Doing so may distort the product or result in explosion or fire.)
zDo not use the product near a microwave or wireless LAN.
(The electromagnetic interference between products using the
same frequence may result in malfunctuion or noise.)
zTurn off the product before storing, and keep it away from
places with high temperatures of more than 50°C, under direct
ray of light, or inside a hot vehicle. Keeping it in high
temperature may cause dagradation of the performance and
reduce the durability of the battery.
zPlease do not drop or shock the headset.
3
Cautio
!
zPlease do not rebuild, disassemble or repair the headset
arbitrarely. If rebuilt, disassembled or repaired arbitrarely it will
be not able to receive any free repair service.
zIf you are calling at a high volume for a long period of time, it
may damage your hearing.
zIf you hold the product with your hands too tight, the voice
quality may be degraded.
zPlease do not use this headset while you are driving. If its use is
inevitable, please follow the related laws and regulations and
make your conversation as short as possible.
Since the Bluetooth Mono Headset has a possibility of bad
connection, it shall not be used for the services directly related
to safety.
4
Table of Contents
Safety Notices ............................................. 2
Warnings .......................................................... 2
Cautions ........................................................... 2
Introduction..................................................5
Package .......................................................5
Features....................................................... 6
Before Starting to Use................................. 7
Preparations..................................................... 7
Charging........................................................... 7
Usage...........................................................8
Turning On/Off the Headset............................. 8
Wearing the Headset........................................ 8
Connecting the Headset to a Bluetooth Device9
Calling ............................................................ 10
Receiving a Call ............................................. 11
Hanging up the Call........................................ 12
Refusing a Call ............................................... 12
Call Switching ................................................ 12
Specifications............................................. 14
Troubleshooting......................................... 15
LED Status Indication ................................16
Quality Warranty........................................17
5
Introduction
Wireless Mono Headset, developed with the Bluetooth
technology, has the following primary features.
zWireless Mono Headset
zWireless Handsfree
Package
zAfter purchasing, detach the BD_Address/serial number label
from the product, keep it attached to the blank of the warranty
(required for the after-sales service.).
DC chage
r
SRS-200BM Bod
y
Part of the components
shall be changed without
notice for quality
im
p
rovement.
User’s manual
Sleeve
Strap
6
Features
Hand Strip Link
Power switch
Microphone
Input
Multi-function
Button
Bluetooth
Operation
Status LED
Sleeve
Earphone Cap
7
Cautio
!
Before Starting to Use
Preparations
zPlease read the instructions carefully before its useage.
Charging
zThe product includes a built-in battery. Please charge it with
the DC charger provided in the box.
zAfter purchasing this product, please charge the battery fully
before using it for the first time.
zPlease charge the headset until the indicator turns from Red
to Blue.
zDo not use the headset while charging.
Please do not charge this headset with the unspecified
chargers. It may cause damage and deterioration.
8
1
2
3
Usage
Turning On/Off the Headset
The headset may be turned on/off by opening/closing the
earphone cap.
Wearing the Headset
Pull earphone cap.
ON
Pull ea
r
phone cap.
OFF
Pushing earphone cap.
Bend the earphone. Wear on your ear.
9
Cautio
!
Connecting the Headset to a Bluetooth Device
zConnection between headset and Bluetooth mobile phone is
made wirelessly through an encoded authentication.
The following registration process should be performed
for the initial connection.
1. Set the headset into stand bymode. With Multi-function button
pressed, you may open the earphone capturn on the power. (As
the operation status LED flicks in Blue and Red color, stand-by
mode lasts for aroundthree minutes.)
2. Search the headset from the mobile phone, referring to the
mobile phone user’s manual.
3. Select “SRS-200BM” from the searched list.
4. Enter “0000” when mobile phone asks for password or
pin-number.
5. Select “SRS-200BM” from the list of registered devices.
Please refer to the User’s Manual of your mobile phone for the
details about Bluetooth headset connection, registration and
deletion.
* Once registered, there is no need for re-registeringfor future
connection.
* If there is no registered devices in three minutes of register-stand-by
mode, it automatically switches to connect-stand-by mode. In this
case, turn off the device and try to register from the beginning.
10
Cautio
!
Cautio
n
!
Calling
Calling to the Latest Number
zPress the multi-function button to check the last call history
saved in the phone.
zPress the multi-function button again to call the last number.
(Depends on the type of the mobile phone, you may call
without saving the call history.)
Calling with a Voice
zPlease press the multi-function button for more than
2 seconds.
zYou can use it according to the sequence of voice calling
function of your mobile phone.
When the mobile phone supports voice calling function and is
connected through a handsfree profile, calls can be placed
with a voice.
Calling with a Mobile Phone
zPlease call with your mobile phone.
zCheck the calling tone from the mobile phone and push the
multi-function button on your headset. You can either hear the
calling tone or communicate through headset. (In case of the
mobile phone that supports an automatic call switching
function, the call automatically switchs to the headset.)
Making a call in a noisy place or outside may cause a difficulty
for communication.
Inhaltsverzeichnis
Andere SLaudiolab Headset Handbücher
