SLEIPNER MOTOR AS Side-Power SH Series Bedienungsanleitung

Made in Norway

©Sleipner Motor AS 2020

SLEIPNER MOTOR AS

P.O. Box 519

N-1612 Fredrikstad

Norway

www.side-power.com

Document id:

Revision:

Date:

6572

SH SERIES

OPERATIONAL

HYDRAULIC USER MANUAL

To download your language go to www.side-power.com

Keep this

manual onboard !

2020

26572 22020

SH user manual

DECLARATION OF CONFORMITY

Sleipner Motor AS

P.O. Box 519, Arne Svendsensgt. 6-8

N-1612 Fredrikstad, Norway

Declare that this product with accompanying standard control systems complies with

the essential health and safety requirements according to:

DIRECTIVE 2013/53/EU

DIRECTIVE 2014/30/EU

DIRECTIVE 2014/35/EU

MC_0020

Important User Considerations and Precautions................. 3

User Manual

Thruster Operation .................................................................... 4

Control Panel............................................................................. 5

Maintenance........................................................................ 6 - 7

Troubleshooting......................................................................... 8

Checklist.................................................................................... 8

Spare Parts................................................................................ 9

Contents

MC_0048

Important Thruster User Considerations and Precautions

IMPORTANT

Failure to follow the Considerations and precautions can cause serious injury / damage and will render all warranty given by Sleipner

Motor AS VOID.

Never use thrusters when close to objects/ persons or pets in the water. The thruster will draw objects into the tunnel and

the rotating propellers. This will cause serious injuries and damage the thruster.

• Always turn the control device/panel oﬀ when the thruster is not in use or when leaving the boat.

• When leaving the boat always turn oﬀ the main power switch for the thruster.

• Never use thrusters out of water.

• If the thruster stops giving thrust while running, there is possibly a problem in the drive system. You must immediately stop running the thruster and

turn it oﬀ . Running the thruster for more than a few seconds without resistance from the propeller can cause serious damage to the thruster.

• If the performance of the thruster is reduced check the hydraulic system or check the tunnel for marine growth.

• If two panels are operated with conﬂ icting directions at the same time the thruster will not run. If both are operated in the same direction, the thruster

will run in this direction.

• If you notice any faults with the thruster switch it oﬀ to avoid further damage.

• It is the owner/ captain/ other responsible parties full responsibility to assess the risk of any unexpected incidents on the vessel. If the thruster stops

giving thrust for some reason while manoeuvring you must have considered a plan on how to avoid damage to persons or other objects.

• The primary purpose of the thruster is to manoeuvre/ dock the vessel. Expect reduced performance at higher speeds.

Products

SH1000/513-BA45 - SH1000 Tunnel thruster, Ø513mm

SH100/185T-U06 - SH100 Tunnel thruster, U06

SH100/185T-U10 - SH100 Tunnel thruster, U10

SH160/215T-U14 - SH160 Tunnel thruster, U14

SH160/215T-U06 - SH160 Tunnel thruster, U06

SH240/250TC-U08 - SH240 Tunnel thruster, U08

SH240/250TC-U10 - SH240 Tunnel thruster, U10

SH240/250TC-U19 - SH240 Tunnel thruster, U19

SH320/300TC-U16 - SH320 Tunnel thruster, U16

SH320/300TC-U19 - SH320 Tunnel thruster, U19 [Archived]

SH320/300TC-U08 - SH320 Tunnel thruster, U8

SH320/300TC-U23 - SH320 Tunnel thruster, U23

SH320/300TC-U14 - SH320 Tunnel thruster, U14

SH320/300TC-U11 - SH320 Tunnel thruster, U11

SH320/300TC-BA19 - SH320 Tunnel thruster, BA19

SH320/300TC-BA16 - SH320 Tunnel thruster, BA16

SH420/386TC-U37 - SH420 Tunnel thruster, U37

SH420/386TC-BA40 - SH420 Tunnel thruster, BA40

SH420/386TC-BA32 - SH420 Tunnel thruster, BA32

SH420/386TC-U33 - SH420 Tunnel thruster, U33

SH420/386TC-U26 - SH420 Tunnel thruster, U26

SH420/386TC-BA40-S - SH420 Tunnel thruster, BA40

SH420/386TC-U29 - SH420 Tunnel thruster, U29

SH550/BA40-S - Hydraulikk thruster, >550kg

SH550/386TC-P52 - SH550 Tunnel thruster, P52

SH550/386TC-BA60 - SH550 Tunnel thruster, BA60

SH550/386TC-BA32 - SH550 Tunnel thruster, BA32

SH550/386TC-BA40 - SH550 Tunnel thruster, BA40

SH550/386TC-U50 - *Hydraulikk thruster >550-U50

SH550/386TC-U33 - SH550 Tunnel thruster, U33

SH550/386TC-U37 - SH550 Tunnel thruster, U37

SH550/386TC-BA40-S - SH550 Tunnel thruster, BA40

SH550/386TC-BA75 - SH550 Tunnel thruster, BA75

SH550/386TC-G45 - SH550 Tunnel thruster, G45

SH700/412-BA60 - SH700 Tunnel thruster, BA60

SH700/412-BA75 - SH700 Tunnel thruster, BA75

SH700/412-BA45 - SH700 Tunnel thruster, BA45

SH700/412-BA56 - SH700 Tunnel thruster, BA56 [Archived]

SH1000/513-BA110 - * BRUK SH1000/513-BA110D13

SH1000/513-G80 - SH1000 Tunnel thruster, G80

SH1000/513-BA125 - SH1000 Tunnel thruster, BA125

SH1000/513-G75 - SH1000 Tunnel thruster, G75

SH1000/513-BA80 - SH1000 Tunnel thruster, BA80

SH1000/513-G70 - SH1000 Tunnel thruster, G70

SH1000/513-BA60 - SH1000 Tunnel thruster, BA60

SH1000/513-BA110D13 - SH1000 Tunnel thruster, BA110

SH1400/610-BA160 - SH1400 Tunnel thruster, BA160

SH1400/610-BA125 - SH1400 Tunnel thruster, BA125

SH1400/610-BA80 - SH1400 Tunnel thruster, BA80

SH1400/610-BA180 - SH1400 Tunnel thruster, BA180

SH1400/610-BA110 - SH1400 Tunnel thruster, BA110

SH1400/610-BA150 - SH1400 Tunnel thruster, BA150 [Archived]

SH1400/610-BA080 - SH1400 Tunnel thruster, BA80

SH100/185T-U11 - SH100 Tunnel thruster, U11

SH160/215T-U08 - SH160 Tunnel thruster, U08 [Archived]

SH1000/513-BA75 - SH1000 Tunnel thruster, BA75

SH160/215T-U11 - SH160 Tunnel thruster, U11 [Archived]

SH320/300TC-U10 - SH320 Tunnel thruster, U10

SH550/386TC-BA56 - SH550 Tunnel thruster, BA56

SH1000/513-BA90 - SH1000 Tunnel thruster, BA90

SH100/185T-U08 - SH100 Tunnel thruster, U08 [Archived]

SH160/215T-U10 - SH160 Tunnel thruster, U10

SH240/250TC-U14 - SH240 Tunnel thruster, U14

SH240/250TC-U16 - SH240 Tunnel thruster, U16

SH240/250TC-U11 - SH240 Tunnel thruster, U11

SH550/386TC-BA45 - SH550 Tunnel thruster, BA45

6572 22020

SH user manual

DECLARATION OF CONFORMITY

Sleipner Motor AS

P.O. Box 519, Arne Svendsensgt. 6-8

N-1612 Fredrikstad, Norway

Declare that this product with accompanying standard control systems complies with

the essential health and safety requirements according to:

DIRECTIVE 2013/53/EU

DIRECTIVE 2014/30/EU

DIRECTIVE 2014/35/EU

MC_0020

MC_0048

Important Thruster User Considerations and Precautions

IMPORTANT

Failure to follow the Considerations and precautions can cause serious injury / damage and will render all warranty given by Sleipner

Motor AS VOID.

Never use thrusters when close to objects/ persons or pets in the water. The thruster will draw objects into the tunnel and

the rotating propellers. This will cause serious injuries and damage the thruster.

• Always turn the control device/panel oﬀ when the thruster is not in use or when leaving the boat.

• When leaving the boat always turn oﬀ the main power switch for the thruster.

• Never use thrusters out of water.

• If the thruster stops giving thrust while running, there is possibly a problem in the drive system. You must immediately stop running the thruster and

turn it oﬀ . Running the thruster for more than a few seconds without resistance from the propeller can cause serious damage to the thruster.

• If the performance of the thruster is reduced check the hydraulic system or check the tunnel for marine growth.

• If two panels are operated with conﬂ icting directions at the same time the thruster will not run. If both are operated in the same direction, the thruster

will run in this direction.

• If you notice any faults with the thruster switch it oﬀ to avoid further damage.

• It is the owner/ captain/ other responsible parties full responsibility to assess the risk of any unexpected incidents on the vessel. If the thruster stops

giving thrust for some reason while manoeuvring you must have considered a plan on how to avoid damage to persons or other objects.

• The primary purpose of the thruster is to manoeuvre/ dock the vessel. Expect reduced performance at higher speeds.

46572 22020

SH user manual

Thruster Operation

Take time to practice operation in open water to become familiar with the thruster and to avoid damages to your boat or people.

How to use the Thruster

1. Ensure hydraulic power is supplied for the thruster. (NB: Hydraulic power is supplied when the engine is running).

2. Turn on the control panel by pushing both “ON” buttons on the Side-Power panel simultaneously.

* Turn oﬀ the control panel by pushing the “OFF” button

Joystick Control

To Turn the bow in the desired direction move the joystick in the direction you wish the bow to move.

Button Control

To Turn the bow in the desired direction push the red button for port movement or the green button for starboard.

* For other controls like foot switches or toggle-switches please refer to that products user manual for detailed operational use.

How to use a combined bow and stern thruster

The combination of a bow and stern thruster oﬀ ers total manoeuvrability to the boat and the ability to move the bow and the stern separately from each

other. This enables you to move the boat sideways in both directions and turn the boat around its axis 360º staying stationary.

NB: At speed the side thruster will have little or no eﬀ ect to steer the vessel.

MC_0361

!Please refer to the graphic for special considerations relating to your model !

8950 8960 8940 8909c 8955 8965

RCT-20 RCT-21 RCT-23

ON/ OFF CONTROL PANEL

REMOTE CONTROL

6572 22020

SH user manual

MG_0047

Activating the bow thruster

Turn ON thruster Turn OFF thruster

*Control panel example *Control panel example

*Control panel example

*Control panel example*Control panel example

Activating the stern thruster

Activating both bow and

stern thruster to rotate the

boat on axis

Activating both bow and

stern thruster to push the

boat sideways

Control Panel

66572 22020

SH user manual

MG_0148

KEY:

1. Hydraulic Motor

2. Mounting Plate

3. Motor bracket

4. Flexible coupling

5. Gear Leg

6. Propeller

7. Anode

8. Drive pin

9. Washer

10. Lock Nut

11. Fastening Screw for anode

12. Oil drain screw

13. Shaft Key

14. Anode pins

15. Locking Washer

* 100

* 160

* 240

* 320

* 420

* 550

* 700

* 1000

* 1400

14 12

MC_0362

Maintenance

As a part of the seasonal service of your Thruster before every season, always check that:

In Water/ Out of the Water

• The area around the thruster inside the boat is clean and dry. Ensure there are no signs of water or oil leaks.

• All electrical connections are clean and fastened ﬁ rmly.

• Ensure that your batteries are in good condition.

Out of Water

• Check the propeller(s) or tunnel for any damage for example impact damage.

• The propeller(s) is fastened securely to the gear leg.

• Check all components of thruster are fastened securely.

• Clean the tunnel and gear leg from marine growth.

• Paint the propeller and gear leg with anti-fouling before every season to keep it clean from sea growth. (NB: Never paint the anode, rubber seals

or propeller shaft. Ensure paint does not enter the space between the propeller and the gear leg.)

• Change the anode before every season, or when half the anode has eroded. Always use a sealant or thread glue on the securing screw to ensure

that it does not fall oﬀ .

• Ensure propellers are attached correctly. (NB: Counter rotating models use a left hand/ right hand propeller.)

• If an external oil tank is installed with your model, ensure the oil level remains the same.

!Please refer to the graphic for special considerations relating to your model !

6572 22020

SH user manual

MG_0148

KEY:

1. Hydraulic Motor

2. Mounting Plate

3. Motor bracket

4. Flexible coupling

5. Gear Leg

6. Propeller

7. Anode

8. Drive pin

9. Washer

10. Lock Nut

11. Fastening Screw for anode

12. Oil drain screw

13. Shaft Key

14. Anode pins

15. Locking Washer

* 100

* 160

* 240

* 320

* 420

* 550

* 700

* 1000

* 1400

14 12

MC_0360

Basic Troubleshooting

Before seeking assistance from the website help desk from your Side-Power dealer/ distributor, please perform these tests.

(NB: If you are unable to understand what to check, you must consult a Side Power distributor.)

CHECK SOLUTION

The motor runs, but there is no thrust

Check propellers are ﬁ tted, fastened correctly and not

damaged on the prop shaft. Re-fasten or replace if necessary

On counter rotating models ensure LH and RH propellers

are installed correctly Install correctly

Check the ﬂ exible coupling between the motor and drive

shaft is ﬁ tted correctly and not damaged. Replace if necessary

Check the gears are not damaged. Replace if necessary

The thrusters performance is reduced

Check the propeller, gear house and tunnel are free from

growth/ barnacles or debris and damage.

If there is growth in the tunnel, this will disturb/ block the water ﬂ ow and signiﬁ cantly

reduce performance

Check oil pressure and levels. Fill if necessary

86572 22020

SH user manual

MC_0161

Seasonal Checklist

CHECK TO PERFORM DATE

The thruster components are fastened

securely.

The area around the thruster is clean

and dry. If there are signs of water or

oil leaks

Paint the propeller and gear leg with

anti-fouling.

Batteries are in good condition.

All electrical connections are clean

and fastened ﬁ rmly.

Change the anode.

Check oil in the oil reservoir.

6572 22020

SH user manual

10 6572 22020

SH user manual

1. The equipment manufactured by Sleipner Motor AS (The “Warrantor”) is warranted to be free from defects in workmanship and materials under normal

use and service.

2. This Warranty is in eﬀ ect for of two years (Leisure Use) or one year (Commercial use) from the date of purchase by the user. Proof of purchase must be

included, to establish that it is inside the warranty period.

3. This Warranty is transferable and covers the product for the speciﬁ ed time period.

4. In case any part of the equipment proves to be defective, other than those parts excluded in paragraph 5 below, the owner should do the following:

(a) Prepare a detailed written statement of the nature and circumstances of the defect, to the best of the Owner’s knowledge, including the date of

purchase, the place of purchase, the name and address of the installer, and the Purchaser’s name, address and telephone number;

(b) The Owner should return the defective part or unit along with the statement referenced in the preceding paragraph to the warrantor,

Sleipner Motor AS or an authorized Service Centre, postage/shipping prepaid and at the expense of the Purchaser;

(c) If upon the Warrantor’s or Authorized Service Centre’s examination, the defect is determined to result from defective material or workmanship, the

equipment will be repaired or replaced at the Warrantor’s option without charge, and returned to the Purchaser at the Warrantor’s expense;

(d) no refund of the purchase price will be granted to the Purchaser, unless the Warrantor is unable to remedy the defect after having a reasonable

number of opportunities to do so. Prior to refund of the purchase price, Purchaser must submit a statement in writing from a professional boating

equipment supplier that the installation instructions of the Installation and Operation Manual have been complied with and that the defect remains;

(e) warranty service shall be performed only by the Warrantor, or an authorized Service Centre, and any attempt to remedy the defect by anyone else

shall render this warranty void.

5. There shall be no warranty for defects or damages caused by faulty installation or hook-up, abuse or misuse of the equipment including exposure to

excessive heat, salt or fresh water spray, or water immersion except for equipment speciﬁ cally designed as waterproof.

6. No other express warranty is hereby given and there are no warranties which extend beyond those described in section 4 above. This Warranty is

expressly in lieu of any other expressed or implied warranties, including any implied warranty of merchantability, ﬁ tness for the ordinary purposes for

which such goods are used, or ﬁ tness for a particular purpose, and any other obligations on the part of the Warrantor or its employees and

representatives.

7. There shall be no responsibility or liability whatsoever on the part of the Warrantor or its employees and representatives for injury to any person or

persons, or damage to property, loss of income or proﬁ t, or any other consequential or resulting damage or cost which may be claimed to have been

incurred through the use or sale of the equipment, including any possible failure or malfunction of the equipment, or part thereof.

8. The Warrantor assumes no liability for incidental or consequential damages of any kind including damages arising from collision with other vessels

or objects.

9. This warranty gives you speciﬁ c legal rights, and you may also have other rights which vary from country to country.

For the most up to date documentation, we advise you to

visit our website www.side-power.com for the spare parts

list.

For additional supporting documentation, we advise you

to visit our website www.side-power.com for the spare

parts list.

Spare Parts