Remember to follow the steps exactly as shown. Do not jump ahead, or you’ll get tangled up!
Step 5. - Attach Second Side Panel and Installing Corner Blocks
Repeat STEP 3 for the other side panel see fig. 5 and 5A. Take the corner blocks and 1/2” screws and
attach to face frame and side panels (see fig. 5B and 5C) in the middle of the cabinet. (see fig. 5D)
Step 7. - Fastening Cabinet to Wall and Stacking Cabinets
After glue is dry locate studs in wall (fig. 7A). Attach cabinet to wall using 2 ” screws (fig. 7). STACKING CABINETS: If you are stacking
the cabinet place cabinet on top of already installed cabinet, carefully overhang cabinet to revealing dowel holes. Push dowels into all of the
pre-drilled holes (fig. 7B and 7C). Next align dowels with cabinets below (fig 7D). Set cabinet down in place and attach to wall (fig, 7).
NOTE:
It is important that the
cabinet is set flush to the
wall and fastened to wall
studs for stability and
strength.
If you have purchased
the optional Adjustable Shelf:
To install shelf, use all 4 shelf clips.
Push shelf clip into pre-drilled holes
on side panel. Make sure the clips are
level in front, back and on the other side
panel. Angle shelf and slide into cabinet,
setting one side of shelf on top of shelf
clip (fig. 9). Let shelf drop onto the other
side and snap into place. Secure screw
into underside of shelf.
Step 10. - Congratulations!
CONGRATULATIONS!
You have just finished
assembling and installing
a SLIDE-LOK cabinet.
Attach corner blocks to both
side of the cabinet, see
figure 5D
Step 8. - Hang Cabinet Doors
To hang doors, use the 1 ” silver screws. Hold door up so
the door hinge hole lines up with the pre-drilled hole in the
face frame. Screw in the hinge so the doors are level across
the top and flush in the front. Take clear bumpers and attach
as in fig. 8B, to top and bottom of doors.
NOTE:
Hinge is 6 way adjustable
(up, down, in out, back
and forth) fig. 8A.
In and out
Up and Down
Back and Forth
[ fig 5 ]
[ fig 5A ] [ fig 5B ] [ fig 5C ]
[ fig 5D ]
[ fig 7 ] [ fig 7A ]
[ fig 8 ]
[ fig 8A ] [ fig 8B ] [ fig 9 ]
Note:
S2424 stackable cabinet shown.
Overall dimensions of your finished
cabinet may vary depending upon
model number of the cabinet you
have assembled.
Step 9. - Optional, Install Shelf
[ fig 7B ] [ fig 7C ] [ fig 7D ]
DO NOT TO OVERTIGHTEN!
It is recommended that you finish
tightening with a screwdriver to avoid
stripping the pre-drilled holes.
!
Step 6. Attaching Optional Cabinet Legs
If you plan on using your cabinet as a base unit and have
purchased the optional adjustable legs, then proceed with
Step 6, otherwise skip to Step 7.
Assemble adjustable leg by attaching the dowel head to the leg
(fig. 6, 6A, and 6B). Take the assembled leg and insert dowel
into the hole provided as
in fig. 6A. Use 1/2” screws
and screw leg into bottom
of cabinet to keep it firmly in
place (fig. 6C and 6D). Let
glue dry completely.
Before Proceeding to the
next step, let glue dry
completely.
!
[ fig 6 ]
[ fig 6A ] [ fig 6B ]
[ fig 6C ] [ fig 6D ]
If you purchased adjustable legs for this cabinet continue with Step 6, otherwise skip this step.
NOTE: - Attaching Two or More Cabinets
When putting two cabinets together, hold both face frames flush, see fig. 10A.
Take a 1 ” screw and insert it behind the face frame, into the side panel of
one cabinet through the other cabinet’s side panel, screwing it tightly together
see figures 10B & 10C. Do this at the top, middle and bottom of the cabinet.
[ fig 10A ] [ fig 10B ] [ fig 10C ]
NOTE: To secure shelf clips to side,
use 1/2” silver screws and screw
shelf clips into side panel.
Visit Jack’s Design Center, an interactive SLIDE-LOK
Storage System design tool, which will enable you to
design your own SLIDE-LOK Storage system online
Jack’s Design Center simplifies the process of designing
your own SLIDE-LOK Storage Solution with features such
as user dimensions, a parts list generator and the ability
to print your SLIDE-LOK creation, making ordering your
next SLIDE-LOK Storage System easier than ever.
www.slide-lok.com | 800-835-1759
Design Your Own
SLIDE-LOK Storage Solution
