SMART-AVI HDC-IR Bedienungsanleitung

TECHNICAL SPECIFICATIONS WHAT’S IN THE BOX

IR-EYE

IR Frequency Range 30 KHz to 80 KHz

Capture Distance Up to 25’

Cable Connector 3.5 mm stereo jack

IR Signal Indicator Green LED

IR-EYE

IR Frequency Range 30 KHz to 80 KHz

Capture Distance Up to 10’

Cable Connector 3.5 mm stereo jack

IR Signal Indicator Red LED

OTHER

Power 12VDC 2A

Cable Link CAT5 568A or 568B

Dimensions 2.5” W x 2.5” D x 1.0” H

Weight .25 lb

Operating Temp. 0°C ~ 40°C / 32°F ~ 104°F

Storage Temp. -20°C ~ 70°C / -4°F ~ 158°F

Relative Humidity Up to 95%

PART NO. QTY DESCRIPTION

HDC-IR 2 IR CAT5 Point to Point

SM-LED 1 IR Emitter

SM-EYE 1 IR Eye (Optional)

PS12VDC2A 2 Power supply 12VDC2A

1 Quick Start Guide

DESIGNED

AND MADE

IN THE USA

NOTICE

The information contained in this document

is subject to change without notice. iPGARD

makes no warranty of any kind with regard

to this material, including but not limited to,

implied warranties of merchantability and

tness for a particular purpose. iPGARD

will not be liable for errors contained

herein, or for incidental or consequential

damages in connection with the furnishing,

performance, or use of this material. No

part of this document may be photocopied,

reproduced, or translated into another

language without the prior written consent

from iPGARD, Inc.

20170518

Toll Free: (888)-994-7427

Phone: (702) 800-0005

Fax: (702)-441-5590

WWW.iPGARD.COM

A full manual can be downloaded from

www.smartavi.com/hdc-ir/

HDC-IR

IR CAT5 Point to Point Extender

USES A SINGLE CAT5

TO BROADCAST IR

UP TO 1000FT AWAY(333M

Quick Start Guide

The HDC-IR range of products allow the

extension of Infra Red control signals using

single CAT5 UTP (category 5, unshielded

twisted pair) cable. The HDC-IR is the rst

product for this application.

• Uses easy to install, inexpensive CAT5

• Output reaches up to 1000 feet (300 m)

• Sends IR and Power signals over CAT5

• High ground loop immunity

• Built-in lightning, power surge and

transient protection

• Remote Units come with Buffered Outputs

• Compact Enclosure

• Optional power supply for remote unit

• Fully compliant with standard modulated

IR and the latest IRDA

• Fully transparent path for all protocols

and data transfers

• Bi-directional IR

• Supports any IR Remote Control

IR-EYE

IR-LED

INTRODUCTION

FEATURES

HARDWARE INSTALLATION

1. Connect the IR LED to the IR window on the source device.

2. Connect power supply to the unit. Observe LED lighting up indicating power present.

3. Connect IR LED to the IR window on the souce device.

4. Connect the IR Eye to the Receiver.

5. Observe LED lighting indicating power present.Connect the speakers to the Audio Out port.

6. Connect the transmitter to the receiver using Category 5 UTP cable (Purchased separately).

The CAT 5 UTP cable, if purchased in bulk, will be wired using 568A or 568B wiring standard.

7. Once connected, check that the power LEDs on both the receiver and the transmitter are

on, IR status LED is on and RX LED is ashing when Remote control is used indicating that

communication is in progress

CAT5

DVD Player DVD Player DVD Player

IR-In Out-1 Out-2 Out-3

HDC-IR

IR extender over Twisted Pair

HDC-IR

CONTROL

IR-In Out-1 Out-2 Out-3

HDC-IR

IR extender over Twisted Pair

HDC-IR

CONTROL

Andere SMART-AVI Extender Handbücher

SMART-AVI

SMART-AVI SDX-XT Bedienungsanleitung

SMART-AVI

SMART-AVI DPX-1P-Plus Bedienungsanleitung

SMART-AVI

SMART-AVI FDX-M4P Bedienungsanleitung

SMART-AVI

SMART-AVI SWP-T10 Bedienungsanleitung

SMART-AVI

SMART-AVI HDX-LT Bedienungsanleitung

SMART-AVI

SMART-AVI VDX Bedienungsanleitung

SMART-AVI

SMART-AVI DVX-200-Pro Bedienungsanleitung

SMART-AVI

SMART-AVI SDX-XT-4P Bedienungsanleitung

SMART-AVI

SMART-AVI HDX-W100S Bedienungsanleitung

SMART-AVI

SMART-AVI LDX Bedienungsanleitung

SMART-AVI

SMART-AVI SX-500 Bedienungsanleitung

SMART-AVI

SMART-AVI FDX-2000 Bedienungsanleitung

SMART-AVI

SMART-AVI V2V-AV2H-01 Bedienungsanleitung

SMART-AVI

SMART-AVI SDX-XT-2P Bedienungsanleitung

SMART-AVI

SMART-AVI SDX-XT-4P Bedienungsanleitung

SMART-AVI

SMART-AVI DVX-2P Series Bedienungsanleitung

SMART-AVI

SMART-AVI KLX-500-1U Bedienungsanleitung

SMART-AVI

SMART-AVI HDX-POE Bedienungsanleitung

SMART-AVI

SMART-AVI FDX-500 Bedienungsanleitung

SMART-AVI

SMART-AVI FX-USB Bedienungsanleitung

SMART-AVI

SMART-AVI FVX-2000 Bedienungsanleitung

SMART-AVI

SMART-AVI USBXpress USB-TX050 Bedienungsanleitung

SMART-AVI

SMART-AVI DVX-200 Bedienungsanleitung

SMART-AVI

SMART-AVI SFX-2P Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung