SMART-AVI SM-D2H-4S Bedienungsanleitung

SM-D2H-4S

Quick Start Guide

A full Manual can be downloaded from

www.smartavi.com/SM-D2H-4S/

Advanced KVM Switch

TECHNICAL SPECIFICATIONS

VIDEO

Format DisplayPort, HDMI

Maximum Pixel Clock 165 MHz

Input Interface (4) DisplayPort

Output Interface (1) HDMI

Resolution 3840 x 2160 @ 30 Hz

DDC 5 volts p-p (TTL)

Input Equalization Automatic

Input Cable Length Up to 20 ft.

Output Cable Length Up to 20 ft.

USB

Signal Type USB 2.0, 1.1, and 1.0 w/ internal

hub

Input Interface (4) USB Type B

Output Interface

(2) USB 1.1 Type A for KVM Devices

(2) USB 2.0 Type A Transparent

AUDIO

Input (4) 3.5 mm Stereo Audio

Output (1) 3.5 mm Stereo Audio

POWER

Power Requirements 12V DC, 2A power adapter with

center-pin positive polarity

ENVIRONMENT

Operating Temp 32° to 104° F (0° to 40° C)

Storage Temp -4° to 140° F (-20° to 60° C)

Humidity 0-80% RH, non-condensing

CONTROL

Front Panel Push Buttons with LED indicators

RS-232 Via Serial @ 115200 bps

Hot Keys Via Keyboard

OTHER

Emulation Keyboard, Mouse and Video

WHAT’S IN THE BOX

PART NO. QTY DESCRIPTION

SM-D2H-4S 1 4-Port DP-to-HDMI KVM Switch with

Audio and USB 2.0 Support

PS12VDC2A 1 12V DC, 2A power adapter with

center-pin positive polarity

1 Quick Start Guide

NOTICE

The information contained in this document is subject

to change without notice. SMART-AVI makes no war-

ranty of any kind with regard to this material, includ-

ing but not limited to, implied warranties of merchant-

ability and fitness for particular purpose. SMART-AVI

will not be liable for errors contained herein or for

incidental or consequential damages in connection

with the furnishing, performance or use of this materi-

al. No part of this document may be photocopied,

reproduced, or translated into another language with-

out prior written consent from SMART-AVI, Inc.

Toll Free: (800) AVI-2123

Phone: (702) 800-0005

2455 W. Cheyenne Ave, Suite 112

North Las Vegas, NV 89032

smartavi.com

4-PORT DP to HDMI

KVM SWITCH WITH

USB 2.0 SHARING

HARDWARE INSTALLATION

1. Ensure that power is turned off or disconnected from the unit and the computers.

2. Use DP cables to connect the DP output ports from each computer to the corresponding

DP IN ports of the unit.

3. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the

respective USB ports of the unit.

4. Optionally connect a stereo audio cable (3.5mm to 3.5mm) to connect the audio output of

the computers to the AUDIO IN ports of the unit.

5. Connect monitors to the HDMI OUT console ports of the unit using HDMI cables.

6. Connect a USB keyboard and mouse in the two USB console ports.

7. Optionally connect stereo speakers to the AUDIO OUT port of the unit.

8. Finally, power on the KVM by connecting a 12VDC power supply to the power connector, and

then turn on all the computers.

Note: You can connect up to 4 computers to the 4 port KVM.

EDID LEARN

The KVM is designed to learn a connected

monitor’s EDID upon power up. In the event

of connecting a new monitor to the KVM, a

power re-cycle is required.

SYSTEM CONTROL

There are three ways to control the SM-DPN:

Keyboard HotKeys, RS-232 Serial

Commands, and Front Panel Buttons.

The settings for the serial connection are as

follows: Baud rate: 115200;

Data Bits: 8; Parity: None; Stop Bits: 1;

Flow Control: None.

Command HotKey RS-232

Switch KVM [CT][CT]m[#]<CR> //m[#]<CR>

Audio Only [CT][CT]a[#]<CR> //a[#]<CR>

KM Only [CT][CT]c[#]<CR> //c[#]<CR>

USB Only [CT][CT]u[#]<CR> //u[#]<CR>

Learn EDID [CT][CT]e<CR> //e<CR>

SW Reset [CT][CT]r//r <CR>

Status Query N/A //?? <CR>

Current HK

Trigger

[Alt][Alt][Alt]

k0 <CR>

//hk <CR>

Update HK

Trigger

[HK][HK] k

[1|2|3] <CR>

N/A

Chart Key

[CT] = Ctrl

<CR> = Carriage Return (Enter Key)

[HK] = Current Hot Key Trigger

1 = Ctrl (Default) | 2 = Shift | 3 = Scroll Lock

Andere SMART-AVI Schalten Handbücher

SMART-AVI

SMART-AVI SM-D2H-4D Bedienungsanleitung

SMART-AVI

SMART-AVI SKM-04-LT Bedienungsanleitung

SMART-AVI

SMART-AVI HDN-4QUAD Bedienungsanleitung

SMART-AVI

SMART-AVI HKM-02 Bedienungsanleitung

SMART-AVI

SMART-AVI HR4P Bedienungsanleitung

SMART-AVI

SMART-AVI UHDN-4P-DUO Bedienungsanleitung

SMART-AVI

SMART-AVI D2H-4P-QUAD Bedienungsanleitung

SMART-AVI

SMART-AVI DVN-4DUO Bedienungsanleitung

SMART-AVI

SMART-AVI HR2P Bedienungsanleitung

SMART-AVI

SMART-AVI DPN-4P Bedienungsanleitung

SMART-AVI

SMART-AVI HDR-16x16 Plus V3-S Bedienungsanleitung

SMART-AVI

SMART-AVI SM-KMN-08 Bedienungsanleitung

SMART-AVI

SMART-AVI DV-SW4 Bedienungsanleitung

SMART-AVI

SMART-AVI DVNET-4Quad Bedienungsanleitung

SMART-AVI

SMART-AVI DVN-4QUAD Bedienungsanleitung

SMART-AVI

SMART-AVI SM-HDN-4D Bedienungsanleitung

SMART-AVI

SMART-AVI HDN-4DUO Bedienungsanleitung

SMART-AVI

SMART-AVI DVR4X4S Bedienungsanleitung

SMART-AVI

SMART-AVI DPN-4P Bedienungsanleitung

SMART-AVI

SMART-AVI DVN-4QUAD Bedienungsanleitung

SMART-AVI

SMART-AVI SM-UHN-4S Bedienungsanleitung

SMART-AVI

SMART-AVI DV-SW2 Bedienungsanleitung

SMART-AVI

SMART-AVI SM-DVN-8S-S Bedienungsanleitung

SMART-AVI

SMART-AVI DV-SW4S Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung