SMART-AVI SM-HDN-4Q Bedienungsanleitung
TECHNICAL SPECIFICATIONS WHAT’S IN THE BOX
VIDEO
Fornat HDMI
Host Interface (16) HDMI 19-pin
User Console
Interface (4) HDMI 19-pin
Max Resolution Up to 4K (3840 x 2160 @ 30 Hz)
DDC 5 volts p-p (TTL)
Input Equalization Automatic
Input Cable Length Up to 20 ft
Output Cable Length Up to 20 ft
USB
Signal Type USB 2.0, 1.1, and 1.0
w/ internal hub
Input Interface (4) USB Type B
Output Interface (2) USB 1.1 Type A for KVM Devices
(2) USB 2.0 Type A Transparent
AUDIO
Audio Input (4) 3.5mm stereo audio (female)
Audio Output (1) 3.5mm stereo audio (female)
POWER
Power Requirements 12V DC, 3A power adapter with
center-pin positive polarity
ENVIRONMENT
Operating Temp 32° to 104° F (0° to 40° C)
Storage Temp -4° to 140° F (-20° to 60° C)
Humidity 0-80% RH, non-condensing
CONTROL
Front Panel Push Buttons with LED indicators
RS-232 Via Serial @ 9600 bps
Hot Keys Via Keyboard
OTHER
Emulation Keyboard, Mouse and Video
PART NO. QTY DESCRIPTION
SM-HDN-4Q 1 4-port, Quad-Head HDMI KVM
Switch
PS12VDC3A 112-VDC, 3-A power adapter with
center-pin positive polarity.
1Quick Start Guide
DESIGNED
AND MADE
IN THE USA
NOTICE
The information contained in this document
is subject to change without notice. iPGARD
makes no warranty of any kind with regard
to this material, including but not limited to,
implied warranties of merchantability and
tness for a particular purpose. iPGARD
will not be liable for errors contained
herein, or for incidental or consequential
damages in connection with the furnishing,
performance, or use of this material. No
part of this document may be photocopied,
reproduced, or translated into another
language without the prior written consent
from iPGARD, Inc.
20170518
Toll Free: (888)-994-7427
Phone: (702) 800-0005
Fax: (702)-441-5590
WWW.iPGARD.COM
A full manual can be downloaded from
www.ipgard.com/SM-HDN-4Q/
SM-HDN-4Q
Advanced KVM Switch
4-PORT QUAD-HEAD HDMI
KVM SWITCH
WITH USB 2.0 SHARING
Quick Start Guide
HARDWARE INSTALLATION
1. Ensure that power is turned off or disconnected from the unit and the computers.
2. Use HDMI cables to connect the HDMI output ports from each computer to the
corresponding HDMI ports of the unit.
3. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the
respective USB ports of the unit.
4. Optionally connect a stereo audio cable (3.5mm to 3.5mm) to connect the audio output of
the computers to the AUDIO IN ports of the unit.
5. Connect monitors to the HDMI console ports of the unit using HDMI cables.
6. Connect a USB keyboard and mouse in the two USB console ports.
7. Optionally connect stereo speakers to the AUDIO OUT port of the unit.
8. Finally, power on the KVM by connecting a 12VDC power supply to the power connector, and
then turn on all the computers.
Note: You can connect up to 4 computers to the 4 port KVM.
There are three ways to control
the KVM Switch: Keyboard HotKeys, RS-232
Serial Commands, and Front Panel Buttons.
The settings for the serial connection are as
follows: Baud rate: 9600; Data Bits: 8; Parity:
None; Stop Bits: 1; Flow Control: None.
The following commands can be used:
Users are able to customize the keys that
trigger Hotkeys. The following keys are
allowed: CT (Left/Right), Alt, Shift (Left/
Right), Caps Lock, Scroll Lock, F1-F12
Change HK Trigger
HK + HK + X + desired hotkey
View Current HK Trigger
Use the RS-232 command: //??<CR>
Default HotKey Trigger
CT (Left)
Chart Key
[CT] = Ctrl
<CR> = Carriage Return (Enter Key)
[HK] = Current Hot Key Trigger
Command Hotkey RS-232
Switch KVM [CT][CT][#]<CR> //m[#]<CR>
Audio Only [CT][CT]a[#]<CR> //a[#]<CR>
KM Only [CT][CT]c[#]<CR> //c[#]<CR>
USB Only [CT][CT]u[#]<CR> //u[#]<CR>
Learn EDID [CT][CT]e<CR> //e<CR>
Trigger Hotplug [CT][CT]h<CR> //h<CR>
Reset Software [CT][CT]r//r<CR>
Get Port Status N/A //??<CR>
SYSTEM CONTROL
CUSTOM HOTKEY TRIGGERS
HDMI IN
HDMI OUT
USB IN
USB K/M OUT
USB 2.0 OUT
AUDIO IN
AUDIO OUT
12VDC2.0A
USB
RS232
K/M
AUDIO AUDIO
USB
OUT IN-1
AUDIO
USB
AUDIO
USB
IN-2
AUDIO
USB
HDMIA
HDMIA
IN-1
HDMIA
HDMIA
HDMIOUTA
HDMIB
HDMIB
HDMIB
HDMIB
HDMIOUTB
HDMIC
HDMIC
HDMIC
HDMIC
HDMIOUTC
HDMID
HDMID
HDMID
HDMID
HDMIOUTD
Andere SMART-AVI Schalten Handbücher
SMART-AVI
SMART-AVI D2H-4P-QUAD Bedienungsanleitung
SMART-AVI
SMART-AVI DVN-4Pro Bedienungsanleitung
SMART-AVI
SMART-AVI SM-D2H Series Bedienungsanleitung
SMART-AVI
SMART-AVI HDN-4QUAD Bedienungsanleitung
SMART-AVI
SMART-AVI D2H-4P Duo Bedienungsanleitung
SMART-AVI
SMART-AVI UHDN-4P Duo Bedienungsanleitung
SMART-AVI
SMART-AVI DVN-4P Bedienungsanleitung
SMART-AVI
SMART-AVI SM3-UHX-2D Bedienungsanleitung
SMART-AVI
SMART-AVI HDMVplus Bedienungsanleitung
SMART-AVI
SMART-AVI SM-HDN-8S Bedienungsanleitung
SMART-AVI
SMART-AVI HDMV16X-PLUS-S Bedienungsanleitung
SMART-AVI
SMART-AVI SM-DVN Series Bedienungsanleitung
SMART-AVI
SMART-AVI SM-HDN-4D Bedienungsanleitung
SMART-AVI
SMART-AVI QKVM4K Bedienungsanleitung
SMART-AVI
SMART-AVI HDR32X32 Plus Bedienungsanleitung
SMART-AVI
SMART-AVI SM-DVN-8S-S Bedienungsanleitung
SMART-AVI
SMART-AVI DSK-2H Bedienungsanleitung
SMART-AVI
SMART-AVI SM-HDN-4S-S Bedienungsanleitung
SMART-AVI
SMART-AVI SM-DPN-4Q-S Bedienungsanleitung
SMART-AVI
SMART-AVI HKM-04 Bedienungsanleitung
