SMART Embedded Computing MVME2500 Bedienungsanleitung
MVME2500 VxWorks 6.8 AMP
User Guide
P/N: 6806800M27C
September 2019
© 2019 SMART Embedded Computing™, Inc.
All Rights Reserved.
Trademarks
The stylized "S" and "SMART" is a registered trademark of SMART Modular Technologies, Inc. and “SMART Embedded
Computing” and the SMART Embedded Computing logo are trademarks of SMART Modular Technologies, Inc. All other names
and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. These materials are
provided by SMART Embedded Computing as a service to its customers and may be used for informational purposes only.
Disclaimer*
SMART Embedded Computing (SMART EC) assumes no responsibility for errors or omissions in these materials. These
materials are provided "AS IS" without warranty of any kind, either expressed or implied, including but not limited to,
the implied warranties of merchantability, fitness for a particular purpose, or non-infringement. SMART EC further does
not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these
materials. SMART EC shall not be liable for any special, indirect, incidental, or consequential damages, including without
limitation, lost revenues or lost profits, which may result from the use of these materials. SMART EC may make changes to
these materials, or to the products described therein, at any time without notice. SMART EC makes no commitment to update
the information contained within these materials.
Electronic versions of this material may be read online, downloaded for personal use, or referenced in another document as a
URL to a SMART EC website. The text itself may not be published commercially in print or electronic form, edited, translated,
or otherwise altered without the permission of SMART EC.
It is possible that this publication may contain reference to or information about SMART EC products, programming, or services
that are not available in your country. Such references or information must not be construed to mean that SMART EC intends
to announce such SMART EC products, programming, or services in your country.
Limited and Restricted Rights Legend
If the documentation contained herein is supplied, directly or indirectly, to the U.S. Government, the following notice shall apply
unless otherwise agreed to in writing by SMART Embedded Computing.
Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (b)(3) of the Rights in
Technical Data clause at DFARS 252.227-7013 (Nov. 1995) and of the Rights in Noncommercial Computer Software and
Documentation clause at DFARS 252.227-7014 (Jun. 1995).
SMART Embedded Computing, Inc.
2900 S. Diablo Way, Suite 190
Tempe, Arizona 85282
USA
*For full legal terms and conditions, visit www.smartembedded.com/ec/legal
Table of Contents
MVME2500 VxWorks 6.8 AMP User Guide (6806800M27C) 3
About this Manual ................................................................5
1 Introduction..................................................................9
1.1 Overview ................................................................9
1.2 Deliverables .............................................................9
2 Booting VxWorks ............................................................11
2.1 Introduction .............................................................11
2.2 Network Boot ...........................................................11
2.2.1 Prerequisites ......................................................11
2.2.2 Booting Procedure ..................................................11
2.3 Disk Boot ..............................................................13
2.3.1 Prerequisites ......................................................13
2.3.2 Booting Procedure ..................................................13
2.4 USB Boot ..............................................................15
2.4.1 Prerequisites ......................................................15
2.4.2 Booting Procedure ..................................................15
3 Building Board Support Package ...............................................17
3.1 Building Procedure .......................................................17
A Sample Output ..............................................................27
A.1 Network Boot ...........................................................27
A.1.1 VxWorks Booting on Core 0...........................................27
A.1.2 VxWorks Booting on Core 1...........................................29
A.2 Disk Boot ..............................................................30
A.2.1 VxWorks Booting on Core 0...........................................30
A.2.2 VxWorks Booting on Core 1...........................................31
A.3 USB Boot ..............................................................33
A.3.1 VxWorks Booting on Core 0...........................................33
A.3.2 VxWorks Booting on Core 1...........................................34
MVME2500 VxWorks 6.8 AMP User Guide (6806800M27C) 5
About this Manual
Overview of Contents
This manual is divided into the following chapters and appendix:
Chapter 1, Introduction on page 9, provides an overview of this manual.
Chapter 2, Booting VxWorks on page 11, describes the procedure to boot VxWorks 6.8
AMP on the MVME2500.
Chapter 3, Building Board Support Package on page 17, describes the procedure to build
Board Support Package (BSP).
Appendix A, Sample Output on page 27, provides the sample output of VxWorks 6.8 AMP
booting through network, disk and USB.
Appendix B, Related Documentation on page 37 lists the related documents of VxWorks on
the MVME2500 6.8 AMP.
Abbreviations
This document uses the following abbreviations:
Abbreviation Definition
AMP Asymmetric Multiprocessing
BSP Board Support Package
FTP File Transfer Protocol
IP Internet Protocol
SATA Serial Advanced Technology Attachment
SBC Single Board Computer
TFTP Trivial File Transfer Protocol
6 MVME2500 VxWorks 6.8 AMP User Guide (6806800M27C)
About this Manua
l
About this Manual
Conventions
The following table describes the conventions used throughout this manual.
Notation Description
0x00000000 Typical notation for hexadecimal numbers (digits are 0 through F), for
example used for addresses and offsets
0b0000 Same for binary numbers (digits are 0 and 1)
bold Used to emphasize a word
Screen Used for on-screen output and code related elements or commands.
Sample of Programming used in a table (9pt)
Courier + Bold Used to characterize user input and to separate it from system output
Reference Used for references and for table and figure descriptions
File > Exit Notation for selecting a sub-menu
<text> Notation for variables and keys
[text] Notation for software buttons to click on the screen and parameter
description
... Repeated item for example node 1, node 2, ..., node 12
.
.
.
Omission of information from example/command that is not necessary at
the time
.. Ranges, for example: 0..4 means one of the integers 0,1,2,3, and 4 (used
in registers)
| Logical OR
Indicates a hazardous situation which, if not avoided, could result in death
or serious injury
Indicates a hazardous situation which, if not avoided, may result in minor
or moderate injury
About this Manual
MVME2500 VxWorks 6.8 AMP User Guide (6806800M27C) 7
Summary of Changes
This manual has been revised and replaces all prior editions.
Indicates a property damage message
Indicates a hot surface that could result in moderate or serious injury
Indicates an electrical situation that could result in moderate injury or death
Indicates that when working in an ESD environment care should be taken
to use proper ESD practices
No danger encountered, pay attention to important information
Notation Description
Part Number Publication Date Description
6806800M27C September 2019
Re-branded to SMART Embedded Computing
template. Updated Conventions table; updated
Freescale to NXP; updated Related
Documentation paragraph.
6806800M27B August 2014 Re-branded to Artesyn template.
6806800M27A April 2011 Initial version
8 MVME2500 VxWorks 6.8 AMP User Guide (6806800M27C)
About this Manua
l
About this Manual
MVME2500 VxWorks 6.8 AMP User Guide (6806800M27C) 9
Chapter 1
Introduction
1.1 Overview
The MVME2500 Single Board Computer (SBC) is a VMEbus board, which features a
single-core P2010 or the dual-core P2020 NXP® QorIQ® processors.
VxWorks 6.8 Asymmetric Multiprocessing (AMP) allows the independent instances of the
VxWorks operating system to run on the individual CPUs of a multi-core processor.
This document describes the procedure to boot the VxWorks 6.8 AMP on the MVME25000
board.
1.2 Deliverables
The following table lists the MVME2500 deliverables.
Table 1-1 List of Deliverables
Name Description
vxWorks_00.st VxWorks boot image file for Core 0
vxWorks_01.st VxWorks boot image file for Core 1
mvme2500_AMP_rel1.0.tar.gz VxWorks 6.8 AMP Board Support Package (BSP) for
MVME2500
10 MVME2500 VxWorks 6.8 AMP User Guide (6806800M27C)
Introduction
Introduction
Andere Handbücher für MVME2500
1
Inhaltsverzeichnis
Andere SMART Embedded Computing Einplatinencomputer Handbücher
SMART Embedded Computing
SMART Embedded Computing MVME8100 Bedienungsanleitung
SMART Embedded Computing
SMART Embedded Computing MVME7100ET Kurzanleitung
SMART Embedded Computing
SMART Embedded Computing ATCA-8310 Bedienungsanleitung
SMART Embedded Computing
SMART Embedded Computing MVME3100 Bedienungsanleitung
SMART Embedded Computing
SMART Embedded Computing MVME4100 Bedienungsanleitung
SMART Embedded Computing
SMART Embedded Computing MaxCore MC3000 Datenblatt
SMART Embedded Computing
SMART Embedded Computing PCIE-8130-HL Bedienungsanleitung
SMART Embedded Computing
SMART Embedded Computing COMX-CORE-2610-ET Leitfaden
SMART Embedded Computing
SMART Embedded Computing MVME2500 Kurzanleitung
SMART Embedded Computing
SMART Embedded Computing PCIE-6001 Bedienungsanleitung
Beliebte Einplatinencomputer Handbücher anderer Marken
OLIMEX
OLIMEX A10S-OLinuXino-MICRO Bedienungsanleitung
Commell
Commell FS-978 Bedienungsanleitung
GIGAIPC
GIGAIPC QBiP-8665A/ Bedienungsanleitung
VersaLogic
VersaLogic Python EBX-11 Bedienungsanleitung
Micro Computer Specialists
Micro Computer Specialists IRV-3702 Bedienungsanleitung
CompuLab
CompuLab SB-A510 Bedienungsanleitung
Boser
Boser HS-7321 Bedienungsanleitung
Premier Farnell
Premier Farnell Embest SBC8530 Bedienungsanleitung
MicroSys Electronics
MicroSys Electronics miriac SBC-LS1043A2 Bedienungsanleitung
Aaeon
Aaeon UP Bedienungsanleitung
Portwell
Portwell WUX Series Bedienungsanleitung
Lanner electronics
Lanner electronics IAC-F847 Series Bedienungsanleitung