smart things RC8335PRO Bedienungsanleitung
Welcome to your
Camera
1
Introduction to Your Camera .............................. 2
Features ........................................................................2
Components................................................................ 4
Installing the Product ......................................... 7
Launching the App ............................................ 10
Mounting on the Wall........................................ 13
Specifications..................................................... 15
Works with SmartThings....................................17
Contents
2
Introduction to Your Camera
This SmartThings Cam can monitor your home and
then alert any suspected motions in real time.
Features
•Standalone system: Equipped with CPU and video
encoder for operation, which requires only power
and network connections.
•HD video: Supports up to 1080p HD video with
H.264 encoding.
•Trusted Platform Module (TPM): Its dedicated
chip safely shields cryptographic keys used for
authentication to ensure safe communication
between network components and encrypted
video data.
•Built-in microphone: Used for bi-directional
conversation.
3
Introduction to Your Camera
•2 IR LEDs: Can provide illumination up to 5
meters away for bettervideo quality.
•High dynamic range (HDR): Balances the
illumination for clear image quality.
•Motion detection zone: Can be changed by
dragging or tapping areas for motion monitoring.
•Recording time: Can be specified to let the
camera record video upon motion detection.
Introduction to Your Camera
4
Components
Front panel
Light Sensor
Lens
Status LED
IR LEDs
IR LEDs
Microphones
Microphones
Component Description
Status LED Off: No power supplied
Blue On: Power supplied
Slow blinking of Blue: Booting in
progress
Fast blinking of Blue: Rebooted with
default settings
5
Introduction to Your Camera
Component Description
Status LED Green On: Wireless network
connected
Fast blinking of Green: Data
communication in progress
Amber On: Firmware upgrade failed.
Then the camera reboots after 5
seconds
Fast blinking of Amber: Camera
available for softAp or QR scan
Blinking of Blue and Amber: Upgrading
the firmware
Lens Fixed camera lens
IR Sensors Used for illumination
Microphones Used for conversation
Light Sensor Used to detect light
Introduction to Your Camera
6
Rear panel
Power Plug
Stand
Mounting
Plate
Reset Button
Component Description
Power Plug Connect the power adapter here.
Never use other adapters
Reset Button Press for over10 seconds to restore
the factory default settings. Then
the system reboots with the default
values.
Stand Used to support the camera on a
table or wall.
Mounting Plate Used to install the camera on a wall
after removing from the stand.
7
Installing the ProductInstalling the Product
When the product is ready, install it by keeping the
following procedure:
1 Check the following items are included in the
package including this user guide.
2 Determine the location to install the product.
Installing the Product
8
3 Connect the power plug into the camera and
then plug the power connector into the outlet to
supply power.
Never use power adapters other than the
provided one. It may cause damage to the
system.
The status LED blinks (approx. 1 minute) in
amber during startup. Then the LED color
changes to blue before registration.
After wireless connection is finished, its
color changes to green.
9
Installing the Product
4 Download the SmartThings app for Android or
iOS, create an account, and follow on-screen
instructions to add the device.
5 Use the SmartThings app to scan the QR code
at the bottom of the stand and then follow on-
screen instructions to finish setup.
The QR code is located under the mounting
plate. When you cannot find the QR code,
remove the mounting plate.
Inhaltsverzeichnis
Andere smart things Digitalkamera Handbücher
