Smartgen HAT880 Series Bedienungsanleitung

SMARTGEN (ZHENGZHOU) TECHNOLOGY CO., LTD.

HAT880 SERIES

(HAT880/HAT880S)

DUAL POWER BYPASS ATS CONTROLLER

USER MANUAL

Chinese trademark

English trademark

SmartGen — make your generator smart

SmartGen Technology Co., Ltd.

No.28 Jinsuo Road

Zhengzhou City

Henan Province

P. R. China

Tel: 0086-(0)371-67988888/67981888

0086-(0)371-67991553/67992951

0086-(0)371-67981000(overseas)

Fax: 0086-(0)371-67992952

Web: www.smartgen.com.cn

www.smartgen.cn

Email: sales@smartgen.cn

photocopying or storing in any medium by electronic means or other) without the written permission of

the copyright holder.

Applications for the copyright holder’s written permission to reproduce any part of this publication

should be addressed to SmartGen Technology at the address above.

Any reference to trademarked product names used within this publication is owned by their respective

companies.

SmartGen Technology reserves the right to change the contents of this document without prior notice.

Table 1 - Software Version

Date Version Note

2019-04-25 1.0 Original release.

2019-07-12 1.1 Add Synchronous switchover function description.

HAT880 SERIES DUAL POWER BYPASS CONTROLLER USER MANUAL

HAT880 Series Dual Power Bypass Controller2019-07-11 Version1.1Page 3 of 49

CONTENT

1 OVERVIEW.......................................................................................................................................4

2 NAME CONVENTION AND MODEL CONTRAST............................................................................4

2.1 NAME CONVENTION................................................................................................................4

2.2 MODEL CONTRAST..................................................................................................................4

3 PERFORMANCE AND CHARACTERISTICS ..................................................................................5

4 SPECIFICATION...............................................................................................................................6

5 MEASURE AND DISPLAY DATA ......................................................................................................7

6 OPERATION......................................................................................................................................8

6.1 INDICATORS..............................................................................................................................8

6.2 KEY FUNCTION DESCRIPTION...............................................................................................9

7 LCD DISPLAY .................................................................................................................................10

7.1 MAIN SCREEN.........................................................................................................................10

7.2 STATUS DESCRIPTION ..........................................................................................................11

7.3 MAIN MENU.............................................................................................................................16

8 START/STOP OPERATION............................................................................................................17

8.1 MANUAL START/STOP............................................................................................................17

8.2 AUTO START/STOP.................................................................................................................18

9 PARAMETERS CONFIGURATION.................................................................................................20

9.1 ILLUSTRATION........................................................................................................................20

9.2 PARAMETER CONFIGURATION TABLE................................................................................20

9.3 DIGITAL INPUT/OUTPUT FUNCTION DESCRIPTION...........................................................30

9.4 DEFINITE TIME AND INVERSE DEFINITE TIME OF OVER CURRENT...............................35

10 HISTORICAL RECORDS..............................................................................................................36

11 BLACK BOX RECORDS...............................................................................................................38

12 SWITCH OPERATION..................................................................................................................39

12.1 MANUAL OPERATION...........................................................................................................39

12.2 AUTOMATIC OPERATION.....................................................................................................39

12.3 SYNCHRONING CLOSE .......................................................................................................39

13 ATS POWER SUPPLY..................................................................................................................42

14 NEL CONTROL.............................................................................................................................43

14.1 ILLUSTRATION......................................................................................................................43

14.2 AUTO OPERATION................................................................................................................43

14.3 MANUAL OPERATION...........................................................................................................43

15 COMMUNICATION CONFIGURATION........................................................................................44

16 TERMINALS..................................................................................................................................44

17 TYPICALWIRING DIAGRAM.......................................................................................................47

18 INSTALLATION .............................................................................................................................48

19 TROUBLE SHOOTING.................................................................................................................49

HAT880 SERIES DUAL POWER BYPASS CONTROLLER USER MANUAL

HAT880 Series Dual Power Bypass Controller2019-07-11 Version1.1Page 4 of 49

1OVERVIEW

HAT880 Series Dual Power Bypass ATS Controller is an intelligent dual power bypass switch

module which integrates programmable function with automatic measurement, LCD display and digital

communication. It is with qualities of digitalization, intelligence, and network. Meansurement and

control automation is realized for reducing human operation mistakes, so it is the ideal device for dual

power bypass switch.

HAT880 Series Dual Power Bypass ATS Controller is composed of micro-processor, which is

the core in the controller, and can precisely detect 2-way 3-phase power, making correct judgment for

abnormal power statuses (over voltage, under voltage, loss of phase, over frequency, under frequency)

and outputting free voltage control signals. After overall consideration about its bypass switch

application, it can be used directly on single and dual bypass switches, and manual or remote control

switches. It is with compact structure, advanced circuit, simple wiring, and high reliability, and can be

widely used in electrics, telecommunications, petroleum, coal, metallurgy, railway, municipal

administration, intelligent building fields, electric installations, servicer power supply and debug

system.

2NAME CONVENTION AND MODEL CONTRAST

2.1 NAME CONVENTION

Fig. 1 - Name Convention Diagram

2.2 MODEL CONTRAST

Table 2 - Model

FUNCTION

Model DC Supply AC Supply AC Current

and Power SYNC

Close Input No.

(Fixed. + Flex.)

Output No.

(Flex.) RS485

HAT880 ●●

(90~305)V ●12 12 ●

HAT880S ●●

(90~305V) ●●12 12 ●

HAT880 SERIES DUAL POWER BYPASS CONTROLLER USER MANUAL

HAT880 Series Dual Power Bypass Controller2019-07-11 Version1.1Page 5 of 49

3PERFORMANCE AND CHARACTERISTICS

——System type can set as: S1 Mains S2 Mains, S1 Mains S2 Gen, S1 Gen S2 Mains, S1 Gen

S2 Gen;

——4.3 inchs solid color 240x128 pixel LCD display with white backlit, multilingual interface

(including English, Simplified Chinese and other languages), push-button operation;

——Collect and display voltage, frequency and phase sequence of 2-way 3-phase;

——Collect and display active power, reactive power, apparent power, power factor and current

of load;

——Display position of main switch (working, testing, insulated), and position of bypass switch

(working, testing, insulated);

——Independent S1/S2 over current warning or trip alarm functions;

——NEL (Non-essential Load) trip function;

——Display S1/S2 total kW energy, total kvar energy;

——Display S1/S2 accumulated close times of main switch and bypass switch;

——Display continuous power supply time at present and last time, and S1/S2 total power supply

time;

——Can realize synchronous switchover function, and display voltage difference, frequency

difference and phase difference of 2 circuits;

——For energy-accumulated ATS, it shall close when switch PF(close is prepared well) signal is

active;

——Over/under voltage, over/under frequency, over current, loss of phase, inverse phase

sequence protection functions;

——Automatic/Manual mode switchover; In manual mode, close or open can be controlled

manually;

——All parameters can be set on site. Password validation is applied to prevent wrong operations

for non-professionals;

——The genset can be tested manually on site to achieve start/stop operation;

——Re-close function of main switch and bypass switch in auto mode when power outage occurs;

——Applicable for single bypass, double bypass and alternate dual spare bypass switch;

——Applicable for bypass switch of manual control and remote control

——2-way N wire isolated design;

——Real-time clock (RTC); event log function, which can record e 200 items circularly;

——Black box record function, which can record 5 events circularly, 60 data of 50s before each

event record, and 10s after each event record;

——Scheduled routing start & scheduled not start function for the genset, which can be set as

start once a day/week/month; and running with load or not;

——Can control two generators to work in the mode of circular running, master running and

balanced running;

——Wide DC power supply range, which allows the controller to bear instantaneous 80V DC

current input;

——Large terminal space allows the controller to bear maximum 625V AC voltage input;

——Dual isolated RS485 communication interface, having the functions of "remote control,

remote measuring, remote communication, remote regulating" by the ModBus-RTU

communication protocol, which can remotely start/stop the genset and control the breaker to

HAT880 SERIES DUAL POWER BYPASS CONTROLLER USER MANUAL

HAT880 Series Dual Power Bypass Controller2019-07-11 Version1.1Page 6 of 49

close or open;

——Suitable for multiples of AC systems (3-phase 4-wire, 3-phase 3-wire, single-phase 2-wire,

and 2-phase 3-wire);

——Modular design, antiflaming ABS plastic shell, pluggable terminals, built-in mounting，

compact structure and easy installation.

4SPECIFICATION

Table 3 - Performance Parameters

Items Contents

Operating Voltage 1. DC8.0V~35.0V, continuous power supply

2. AC(90~305)V power supplyA1N1/A2N2

Power Consumption <7W(Standby mode:≤2W)

AC Voltage Input

AC system

3P4W (L-L) (80~530)V

3P3W (L-L) (80~625)V DC supply

1P2W (L-N) (50~305)V

2P3W (A-B) (80~530)V

Rated Frequency 50/60Hz

Programmble Output 1~6

Relay Capacity 16A AC250V Volts free output

Programmble Output 7~12

Relay Capacity 8A AC250V Volts free output

Digital Input GND (B-) connected is active.

Communication 1. Dual-RS485 isolated interface, MODBUS Protocol

2. Form D USB port

Case Dimensions 260mmx180mmx54mm

Panel Cutout 242mmx161mm

Working Conditions Temperature: (-25~+70)°C;

Relative Humidity: (20~95)%RH

Storage Condition Temperature: (-30~+80)°C

Protection Level IP65: when water proof gasket ring inserted between screen and housing.

Insulation Strength Apply AC1.5kV voltage between high voltage terminal and low voltage

terminal, and the leakage current is not more than 3mAwithin 1min.

Weight 1.2kg

HAT880 SERIES DUAL POWER BYPASS CONTROLLER USER MANUAL

HAT880 Series Dual Power Bypass Controller2019-07-11 Version1.1Page 7 of 49

5MEASURE AND DISPLAY DATA

Table 4 - Display Parameters

No. Measure & Display Data Items

1 S1/S2 Power Phase Voltage

2 S1/S2 Power Line Voltage

3 S1/S2 Power Voltage Phase

4 S1/S2 Power Frequency

5 Load 3-Phase Current

6 Load 3-Phase Active Power kW

7 Load Total Active Power kW

8 Load 3-Phase Reactive Power kvar

9 Load Total Reactive Power kvar

10 Load 3-Phase Apparent Power kVA

11 Load Total Apparent Power kVA

12 Load 3-Phase Power Factor PF

13 Load Average Power Factor PF

14 Continuous Power Supply Time (Currently)

15 Continuous Power Supply Time (Last Time)

16 S1 Total Power Supply Time

17 S2 Total Power Supply Time

18 S1 Total kW Energy kWh

19 S2 Total kW Energy kWh

20 S1 Total kvar Energy kvarh

21 S2 Total kvar Energy kvarh

22 MS1 Total Close Times

23 MS2 Total Close Times

24 BPS1 Total Close Times

25 BPS2 Total Close Times

26 Digital Input/Output Port Status

27 Real Time Clock

28 Historical Records

29 Black Box Records

30 Communication Status

31 Sync. information (HAT880S)

HAT880 SERIES DUAL POWER BYPASS CONTROLLER USER MANUAL

HAT880 Series Dual Power Bypass Controller2019-07-11 Version1.1Page 8 of 49

6OPERATION

Fig. 2 - Penal Indication Diagram

6.1 INDICATORS

Table 5 - Indicators Description

Indicator Type Description

Alarm Slow flashing (1 time per sec) when warning alarm occurs.

Fast flashing (5 times per sec) when fault alarm occurs.

Man Light on when the module is in Manual mode.

Auto Light on when the module is in Auto mode.

S1-PWR S1 power indicator: always illuminated when S1 is normal; slow flashing (1

time per sec) when voltage is abnormal; extinguished when S1 is no power.

S2-PWR S2 power indicator: always illuminated when S2 is normal; slow flashing (1

time per sec) when voltage is abnormal; extinguished when S2 is no power.

Main When main switch is unlocked, main indicator is always illuminated.

Bypass When bypass switch is unlocked, bypass indicator is always illuminated.

Main S1 Always illuminated: Main S1 closes, load is supplied by S1.

Main Open Always illuminated: Main is open.

Main S2 Always illuminated: Main S2 closes, load is supplied by S2.

Bypass S1 Always illuminated: Bypass S1 closes, load is supplied by S1.

Bypass Open Always illuminated: Bypass is open.

Bypass S2 Always illuminated: Bypass S2 closes, load is supplied by S2.

HAT880 SERIES DUAL POWER BYPASS CONTROLLER USER MANUAL

HAT880 Series Dual Power Bypass Controller2019-07-11 Version1.1Page 9 of 49

6.2 KEY FUNCTION DESCRIPTION

Table 6 – Buttons Function Description

Icon Buttons Function Description

Main S1

Active when bypass is locked (main is unlocked) in manual mode;

Press and if main S1 has opened, main S1 close outputs;

When Sync close is active, if main S2 has closed, press and main S1 sync

close outputs; when main S1 is waiting for Sync, press again and it shall stop

main S1 Sync close.

Main Open Active when bypass is locked (main is unlocked) in manual mode;

Press and main switch shall open.

Main S2

Active when bypass is locked (main is unlocked) in manual mode;

Press and if main S2 has opened, main S2 close outputs;

When Sync close is active, if main S1 has closed, press and main S2 sync

close outputs; when main S2 is waiting for Sync, press again and it shall stop

main S2 Sync close.

Bypass S1

Active when main is locked (bypass is unlocked) in manual mode;

Press and if bypass S1 has opened, bypass S1 close outputs;

When Sync close is active, if bypass S2 has closed, press and bypass S1 sync

close outputs; when bypass S1 is waiting for Sync, press again and it shall

stop bypass S1 Sync close.

Bypass

Open Active when main is locked (bypass is unlocked) in manual mode;

Press and bypass switch shall open.

Bypass S2

Active when main is locked (bypass is unlocked) in manual mode;

Press and if bypass S2 has opened, bypass S2 close outputs;

When Sync close is active, if bypass S1 has closed, press and bypass S2 sync

close outputs; when bypass S2 is waiting for Sync, press again and it shall

stop bypass S2 Sync close.

Manual/

Auto Manual mode andAuto mode switchover.

Main/

Bypass Main switch and bypasss switch switchover.

Return/

Homepage

When parameters are being set, press it and the page shall return back.

In main screen, press the key to return the first screen; in other screen, press

the key to return to main screen.

Set/Confirm In main screen, press the key to enter into menu.

In menu screen, press this key can move cursor and confirm set information.

Up/Mute In main screen, press the key to scroll up screen.

In menu interface, press this key to move up cursor or increase value.

In main interface, press longer to mute alarm.

Down/

Lamp Test

In main screen, press the key to scroll down screen.

In menu interface, press this key to move down cursor or decrease value.

In main screen, press the key longer to enter lamp test mode, LCD is backlit

and all LED lamps are lit and LCD screen display goes black.

HAT880 SERIES DUAL POWER BYPASS CONTROLLER USER MANUAL

HAT880 Series Dual Power Bypass Controller2019-07-11 Version1.1Page 10 of 49

7LCD DISPLAY

7.1 MAIN SCREEN

Table 7 - Screen Display

Items Display Contents

Homepage

S1 power status, S2 power status, switch status;

Supply system diagram;

S1/S2 voltage and frequency;

S1/S2 switching priority;

Genset status;

Breaker position information;

AutoTrans/Restore status;

S1 Power

S2 Power S1 line voltage, phase voltage and frequency, phase angle.

S2 line voltage, phase voltage and frequency, phase angle.

Load

3-phase current (I1,I2,I3);

3-Phase Active Power kW (P1,P2,P3);

3-Phase Reactive Power (Q1,Q2,Q3);

3-Phase Apparent Power kVA(S1,S2,S3);

TotalActive Power kW (sum of P1,P2,P3);

Total Reactive Power kvar (sum of Q1,Q2,Q3);

TotalApparent Power kVA(sum of S1,S2,S3);

3-Phase Power Factor PF(PF1,PF2,PF3);

Average Power Factor PF(average of PF1,PF2,PF3);

S1 Total

S2 Total

S1 Total Active Power;

S1 Total Reactive Power;

MS1 Close Times;

BPS1 Close Times;

S2 Total Active Power;

S2 Total Reactive Power;

MS2 Close Times;

BPS2 Close Times;

Supply Time

S1 Total Supply Time;

S2 Total Supply Time;

Power Supply Time (currently);

Continuous Power Supply Time (Last Time);

I/O

Programmable digital input status and auxiliary status;

Programmable digital output status and LONO supply status;

Comm.

RS485-1 Comm. Status and Baud Rate;

RS485-2 Comm. Status and Baud Rate;

USB Comm. Status

Alarms

Present alarm informations (Warning Alarm and Fault Alarm)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Smartgen Controller Handbücher

Smartgen

Smartgen HGM1780 Bedienungsanleitung

Smartgen

Smartgen HAT600N Series Bedienungsanleitung

Smartgen

Smartgen ALC700 SERIES Bedienungsanleitung

Smartgen

Smartgen APC715 Bedienungsanleitung

Smartgen

Smartgen HMC9000 Bedienungsanleitung

Smartgen

Smartgen HGM7100N Series Bedienungsanleitung

Smartgen

Smartgen HGM9560 Bedienungsanleitung

Smartgen

Smartgen HGMS61 Bedienungsanleitung

Smartgen

Smartgen GENSET HGM8100N Series Bedienungsanleitung

Smartgen

Smartgen HGM6000K Series Bedienungsanleitung

Smartgen

Smartgen HGM6100U2C Series Bedienungsanleitung

Smartgen

Smartgen HFC6100LT Bedienungsanleitung

Smartgen

Smartgen HGM8151 Bedienungsanleitung

Smartgen

Smartgen HGM6100LT SERIES Bedienungsanleitung

Smartgen

Smartgen HGM9310MPU Series Bedienungsanleitung

Smartgen

Smartgen HAT552 Bedienungsanleitung

Smartgen

Smartgen HAT162 Bedienungsanleitung

Smartgen

Smartgen HMU15 Bedienungsanleitung

Smartgen

Smartgen HATC60 Bedienungsanleitung

Smartgen

Smartgen HAT530N Bedienungsanleitung

Smartgen

Smartgen HGM6100N Series Bedienungsanleitung

Smartgen

Smartgen HGM7110DC Bedienungsanleitung

Smartgen

Smartgen HGM6510 Bedienungsanleitung

Smartgen

Smartgen GENSET CONTROLLER MGC310 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung