MANUAL SMART-i ™
4
1. Basic use
Battery
Battery status icon：
【Attention】Please charge the battery if the status is low.
Power charging
Attention：
1. The new battery may not be charged initially
2. 8 to 16 hours is needed for the first three times of charging
3. Ensure subsequent charging of 2 to 4 hours when using a DC adapter.
【Attention】
1. In the event that the unit has been idle for over 60 days, charge the unit for a minimum of 6 hours prior to
use.
2. Discharge the battery if the device is not being used for a period longer than 90 days.
Powering On & Off：
Press and hold the “Power” button to power the equipment on / off.
Sleeping mode (Activate by pressing the “Power” button once):
While in sleeping mode, all programs stop working, and resume operation mode after starting up.
The device could toggle to sleeping mode automatically or manually by the 2 methods below:
1. Press “Power” button once to activate sleeping mode.
2. The device will change to sleeping mode when there is no operation for a period preset by the user.
Starting up while in sleeping mode:
Press and hold power key to resume operation mode.
Shutdown
The device will automatically shut down after full consumption of the internally built battery.
Internal Flash Drive
The internal flash drive of the device contains the map software, GPS Navigation data and map license.
Users can store their multimedia files to the internal flash drive.
Note: For USA customers, there will be an internal flash of 2Gigbyte. Navigation software and date will utilize
approximately 1.4 Gigabyte. Users can make use of the remaining 500Megabyte of free space for multimedia storage.
.
