SmartRoom WL-SR-R-01 Bedienungsanleitung
SmartRoom
Wireless Repeater
Quick Start Guide
Please refer to the software instruction
manual or download the Software
Download Guidance for more
information if it is necessary.
®
Member
© Nanjing SmartRoom Co.,Ltd. 2013.
Publication Number: 2013-0627.1
The manual is issued by Nanjing SmartRoom Co., Ltd. It is without warranty.
We reserve the right to change and modify misprinted and incorrect information and improve
programs or devices at any time without notice. Such modifications will be written in the
new- edition of the manual.
The reproductions of the content of the manual, in whole or in part, are strictly prohibited.
Without the written consent from Nanjing SmartRoom Co., Ltd, the using of the content in
other computers capable of reproducing and retrieving and reverse engineering are also
Forbidden.
Copyright
SmartRoom logo is registered trademark of Nanjing SmartRoom Co., Ltd.
Nanjing SmartRoom Co., Ltd has the ownership of the above trademark. Usage of these
trademarks is strictly prohibited without the written authorization and permission from
Nanjing SmartRoom Co., Ltd. Legal action will be taken against unauthorized use of these
trademarks.
All other products mentioned in the manual or service name is the trademark or registered
trademark of the respective companies.
Trademark
● Compatible with ZigBee/SmartRoom protocol
● Strengthen wireless signals and enlarge network coverage area
● Moveable, safer and more reliable. Humanized design, plug and play
● Wireless connection without network cable
Basic Functions
1
Function Graphic
2
Multi-function Button
System indicator
Plug
Installation steps
3
1.This product can be used as an ordinary repeater and can also used with Wulian wireless
gateway .
Network Settings
4
Smart Terminal
Wireless Gateway Wireless Repeater
Smart products
2.Quickly click [Multi-Function Button] 4 times to apply to join into ZigBee network. [Sys-
tem indicator light] will keep glittering when searching the network. After the success to
ZigBee network, [System indicator light] will shine for 2 seconds.
5
Quickly click [Multi-Function Button] 4 times
Each click less than 1 second.
Network Settings
System indicator light
3.Long ress [Multi-Function Button] for 10 seconds, [System indicator light] will twinkle for 4 times,
then it will return to factory settings and exit from ZigBee network.
6
Network Settings
Long press [Multi-Function
Button] for 10 seconds
[System indicator light] will
go out after twinkling for 4
times
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
