SMC Networks VQC1000 Bedienungsanleitung

5-Port Solenoid Valve

Series VQC

CAT.ES11-80 A

Features 1

Series VQC1000/2000/4000

(Based on IEC529)

Connector

Type

(Series)

VQC1000

VQC2000

VQC4000

Manifold

pitch (mm)

10.5

Flow characteristics Note)

Metal seal

Applicable

cylinder

size (mm)

to ø50

to ø80

to ø140

Compact and high flow

Connector entry direction

can be changed with a

single push

The connector entry direction can be changed from the

top to the side by simply pressing the manual release

button.

It is not necessary to use the manual release button when

switching from the side to the top.

Top entry

Side entry

Conforming to IP67 for

protection from dust

and moisture

M12/M8

connector selection available

For I/O SI unit

(DeviceNet compatible)

Input blocks

Serial transmission

EX250

Note) Values for 2-position single from the cylinder port to the exhaust. (From 2 to 3 and from 4 to 5)

Series

EX500

Connector Type Manifold

(For kits S and T)

Outstanding response times

and long life

(Metal seal: Single type with light and surge suppressor)

VQC1100: 10ms ±2ms; 200 million cycles

VQC2100: 20ms ±2ms; 200 million cycles

VQC4100: 17ms ±3ms; 100 million cycles

Accommodates gateway

type serial wiring

• Gateway unit types are DeviceNet, PROFIBUS-DP and

Remote I/O.

• Because just one gateway unit controls up to 4 branch

lines, it offers much more freedom in choosing valve

mounting locations than do conventional serial units.

• Manifolds and input blocks can be mounted in close

proximity of actuators, thus effectively shortening air

piping and electrical wiring lengths.

• Since wiring is “prepackaged” into one multi-connector

type cable, wiring work is not only made easier, but

much more accurate.

• A single cable from the gateway provides both signal

and power to each branch, thus eliminating the need for

separate power connections for each manifold valve and

input block.

• The use of a multi-connector for input blocks makes

manifold station expansion or reduction a breeze.

NEW CONCEPT

Rubber seal

C[dm3/(s•bar)]

0.72

2.6

6.9

0.25

0.15

0.17

0.18

0.60

1.7

C[dm3/(s•bar)]

1.0

3.2

7.3

0.30

0.38

0.25

0.80

2.0

Features 2

Dual 3-port valves, 4 positions

VQC1000/2000 (Rubber seal type only)

A wide variety of prepackaged wiring configurations

R1 A P B R2

VQC1A01

VQC2A01

VQC1B01

VQC2B01

VQC1C01

VQC2C01

N.C.

valve N.C.

valve

N.O.

valve N.O.

valve

N.C.

valve N.O.

valve

Model A side B side JIS symbol

(P)

(R1) 3

(R2)

(A) 2

(B)

(P)

(R1) 3

(R2)

(A) 2

(B)

(P)

(R1) 3

(R2)

(A) 2

(B)

SKit

(Serial transmission) FKit

(D-sub connector)

Protective enclosure

conforms to IP 67

TKit

(Terminal block box)

PKit

(Flat ribbon cable)

•Our four standard wiring packages bring a world of ease to wiring and maintenance work, while the protective enclosures of two of

them conform to IP67 standards.

•The S Kit is compatible with a combined I/O unit.

(If used with gataway unit, SI must be output only.)

Replaceable

One-touch fittings

Single mounting screw,

clamp construction

NEW CONCEPT

(Refer to the connector wiring diagram)

Printed circuit board patterns between connectors are shifted at every station.

This allows for viable connections to take place without necessarily specifying

whether the manifold station is double, single, or mixed wiring.

Series

EX500

25-pin 26-pin, 20-pin

Connector wiring diagram (mixed wiring)

Output

COM

Station 1

Double wiring Station 2

Single wiring Station 3

Double wiring Station 4

Single wiring

Protective enclosure

conforms to IP 67

Connector type manifold

•The use of multi-pin connectors to replace wiring inside manifold

blocks provides flexibility when adding stations or changing

manifold configuration.

•Connector clusters give a new dimension to the notion of

interchangeability. For example, changing from F Kit (D-sub

connector) to S Kit (serial transmission) is achieved by simply

changing the kit piece.

•Two 3-port valves built into one body.

•The 3-port valves on the A and B sides can operate

independently.

•When used as 3-port valves, only half the number of

stations is required.

•Can also be used as a 4-position, 5-port type valve.

Exhaust center : VQC1A01

VQC2A01

Pressure center: VQC1B01

VQC2B01

Serial transmission

EX500 D-sub connector Flat ribbon cable Terminal block box

Wiring

Features 3

Base-Mounted type: Variations

Series

VQC1000

Series

VQC2000

Series

VQC4000

Metal sealRubber seal

VQC100

VQC101

Metal sealRubber seal

VQC200

VQC201

Metal sealRubber seal

VQC400

VQC401

Sonic

Conductance

C[dm3/(s•bar)]

S Kit

Serial transmission

Single/Double

Applicable bore size

0.72 0.72

1.0 0.65

2.6 2.0

3.2 2.2

6.9 6.3

7.3 6.4

to ø50

to ø80

to ø140

Gateway application

Compatible network

• Remote I/O

• DeviceNet

• PROFIBUS-DP

Gateway application requires a

gateway unit and

communication cable

separately.

Contact SMC for

more details.

Conforms to IP67

Decentralized Serial Wiring

Compatible network

• DeviceNet

• PROFIBUS-DP

I/O

Serial unit: EX500 Serial unit: EX250



—



—

Series

Ex500

Values of

CYL to EXH

(From 4 to 5

and

from 2 to 3)

3-position (Closed center)

Series

Ex500

Features 4

Port size

F Kit

D-sub connector P Kit

Flat ribbon cable T Kit

Terminal block box

D-sub connector

Compatible with

D-sub connector that

(

complies with MIL standard.

)

Flat ribbon cable

Compatible with

flat ribbon cable connector

that complies

with MIL standard.

Terminal block box

(Terminal blocks)

Conforms to IP67 Conforms to IP67

Compatible network

•DeviceNet

•PROFIBUS-DP

I/O

Serial unit: EX240

Terminals are concentrated

in compact clusters within

the terminal block box. SUP

port

EHX

1, 3

(P, R)

Cylinder

port

C3 (for ø3.2)

C4 (for ø4)

C6 (for ø6)

M5 (M5 thread)

N1 (ø1/8")

N3 (ø5/32")

N7 (ø1/4")

C4 (for ø4)

C6 (for ø6)

C8 (for ø8)

N3 (ø5/32")

N7 (ø1/4")

N9 (ø5/16")

C8 (for ø8)

C10 (for ø10)

C12 (for ø12)

N7 (ø1/4")

N9 (ø5/16")

N11 (ø3/8")

Rc 1/4

Rc 3/8

Rc 1/4

(bottom ported)

(NPT, NPTF, G)

2, 4

(A, B)

C8 (for ø8)

N9 (ø5/16")

C10 (for ø10)

N11 (ø3/8")

Rc 1/2

(NPT, NPTF, G)

Rc 3/4

(NPT, NPTF, G)

—



—



—



25-pin 26-pin

20-pin

( )

Conforms to IP67

TD0 Terminal block box kit 1 to 10 stations

(20 stations)

Plug-in Unit

Series VQC1000/2000

Base-Mounted Type

How to Order Manifolds

VV5QC 1 108 C6

2VQC1000

VQC2000

Series

FD1

1Plug-in unit

Manifold type

Stations

VV5QC 1 108 C6

SDQ

Options

Input block COM

(Indicate for I/O unit only)

SI unit COM

Kit designation/Electrical entry/Cable length

Number of input blocks

(Indicate for I/O unit only)

Input block type

(Indicate for I/O unit only)

Cylinder port size

Refer to manifold specification sheet on pages 23 to 26

for detailed information on models.

F P T

Kit

(Decentralized wiring type serial transmission kit)

Kit

(Terminal block box kit)

SD0

SDA1

SDA2

Serial kit without SI unit

Serial kit for Remote I/O

Serial kit for DeviceNet/PROFIBUS-DP

1 to 8 stations

(16 stations)

Serial unit: EX500

SKit

(I/O serial transmission kit)

SD0

SDQ

SDN

Serial kit without SI unit

Serial kit for DeviceNet

Serial kit for PROFIBUS-DP

1 to 12 stations

(24 stations)

Serial unit: EX250

Kit

SKit

PD0

PD1

PD2

PD3

PDC

PKit

(Flat ribbon cable kit)

FD0

FD1

FD2

FD3

1 to 12 stations

(24 stations)

FKit

(D-sub connector kit)

D-sub connector kit (25P) without cable

D-sub connector kit (25P) with 1.5m cable

D-sub connector kit (25P) with 3.0m cable

D-sub connector kit (25P) with 5.0m cable

1 to 12 stations

(24 stations)

1 to 9 stations

(18 stations)

Flat ribbon cable kit (26P) without cable

Flat ribbon cable kit (26P) with 1.5m cable

Flat ribbon cable kit (26P) with 3.0m cable

Flat ribbon cable kit (26P) with 5.0m cable

Flat ribbon cable kit (20P) without cable

Note) A separate gateway unit and communication cable are required.

25-pin 26-pin

20-pin Conforms to IP40

Conforms to IP67

Conforms to IP40

⋅⋅⋅⋅⋅⋅

How to Order Valves

Manifold Options

2VQC1000

VQC2000

Series

Type of actuation

VQC 1 1 0 5

Coil voltage

Manual override

Seal type

Function

Light/Surge voltage suppressor

Note 1) For metal seal type only.

Note 2) When specifying more than

one option, enter symbols in

alphabetical order.

2-position single

2-position double (metal)

2-position double (rubber)

3-position closed center

3-position exhaust center

3-position pressure center

14-position dual 3-port valve

(A)

4-position dual 3-port valve

(B)

4-position dual 3-port valve

(C)

Metal seal

Rubber seal

Note) Not applicable to S Kit.

With

Without Note)

Nil

Standard type (1W)

High voltage type (1.0MPa)

Negative COM

External pilot

Low-wattage type (0.5W)

Nil

24VDC

12VDC

Nil: Non-locking

push type

(Slotted)

B: Locking type

(Slotted)

C: Locking type

(Manual)

SUP block plate

VVQ1000-16A

VVQ2000-16A

Blanking plug

KQ2P-

VVQC1000-19A- -

SC3

EXH block plate assembly

Back pressure check valve

Assembly [-B]

VVQ1000-18A, VVQ2000-18A

Name plate [-N]

VVQ1000-N-Stations (1 to max. no. of stations)

VVQ2000-N-Stations (1 to max. no. of stations)

Direct EXH outlet with

built-in silencer [-S]

PEBEA

EAPEB

EA EB

EBPEA

N.C. N.C.

N.O. N.O.

N.C. N.O.

PEA EB

Blanking plate assembly

VVQ1000-10A-1

VVQ2000-10A-1

Perfect block

VVQ1000-FPG-

VVQ2000-FPG-

Dual flow fitting assembly

VVQ1000-52A-C8

VVQ2000-52A-C10

Blanking plate with connector

VVQ1000-1C-

(VQC1000 only)

Electrical wiring

specifications [-K]

Individual SUP spacer

VVQ1000-P-1-C6

VVQ2000-P-1-C8

Elbow fitting assembly

VVQ1000-F-L

VVQ2000-F-L

Port plug

VVQ0000-58A (For VQC1000)

VVQ1000-58A (For VQC2000)

Individual EXH spacer

VVQ1000-R-1-C6

VVQ2000-R-1-C8 EXH block plate

VVQ2000-19A

DIN rail mounting bracket [-D]

VVQ1000-57A

VVQ2000-57A

Silencer (EXH port)

AN200-KM8 (For VQC1000)

AN200-KM10 (For VQC2000)

D-sub connector

Connector terminal no.

Terminal no.

Station 1

Station 2

Station 3

Station 4

Station 5

Station 6

Station 7

Station 8

SOL. A

SOL. B

SOL. A

SOL. B

SOL. A

SOL. B

SOL. A

SOL. B

COM

Standard manifolds are for double

wiring, but mixed wiring (single

and double wiring) can be speci-

fied as options.

Note)

Note 1)

Note) For rubber seal type only.

CYL

port

C6 (SUP port)

ø6 One-touch fitting

C6 (EXH port)

ø6 One-touch fitting

123459

Exhaust port

(-S)

(-T)

(-S)

(-T)

Conforms to IP40

VQC1000/2000

Base-Mounted Type Plug-in Unit

Conforms to IP40

TD0 Terminal block box kit 1 to 10 stations (16 stations)

Plug-in Unit

Series VQC4000

Base-Mounted Type

How to Order Manifolds

VV5QC 4 108 02

4VQC4000

Series

TD0

1Plug-in unit

Manifold type

Stations

VV5QC 4 116 03 SDQW

Options

Input block COM

(Indicate for I/O unit only)

SI unit COM

Kit designation/Electrical entry

Number of input blocks

(Indicate for I/O unit only)

Cylinder port size Refer to manifold specification sheet on pages 27

and 28 for detailed information on models.

Kit

(I/O serial transmission kit)

Kit

(Terminal block box kit)

SD0

SDQW

SDNW

Serial kit without SI unit

Serial kit for DeviceNet

Serial kit for PROFIBUS-DP 1 to 16 stations

Serial unit: EX240

Kit

SKit

Conforms to IP67

⋅⋅⋅⋅⋅⋅

VQC4000

Base-Mounted Type Plug-in Unit

How to Order Valves

Manifold Options

4VQC4000

Series

Type of actuation

VQC 4 1 0 5

Coil voltage

Manual override

Seal type

Function

Light/Surge voltage suppressor

Note) When specifying more than

one option, enter symbols in

alphabetical order.

2-position single

2-position double (metal)

2-position double (rubber)

3-position closed center

3-position exhaust center

3-position pressure center

3-position perfect

Metal seal

Rubber seal

With

Without light, with surge voltage supressor

Nil

Standard type (1W)

External pilot

Low wattage type (0.5W)

Nil

5 24VDC

Nil: Non-locking

push type

(Slotted)

B: Locking type

(Slotted)

PEBEA

EAPEB

EA EB

EBPEA

PEA EB

Blanking plate assembly

VVQ4000-10A-1 Individual SUP spacer

VVQ4000-P-1- 02

Individual EXH spacer

VVQ4000-R-1- SUP/EXH block plate

VVQ4000-16A

Throttle valve spacer

VVQ4000-20A-1

Residual pressure release valve

perfect spacer

VVQ4000-25A-1 Note 1) SUP stop valve spacer

VVQ4000-37A-1 Interface regulator

ARBQ4000-00- -1

EBPEA

Note1) Perfect spacers with residual pressure release valve cannot be combined with external pilot specifications.

LOCK

PUSH

Series

No. of

solenoids

VQC1000

Model Response time ms

Note 2)

Weight

Standard:

Low

wattage

Metal seal

Rubber seal

Metal seal

Rubber seal

Metal seal

Rubber seal

Metal seal

Rubber seal

Metal seal

Rubber seal

Single

VQC1100

VQC1101

VQC1200

VQC1201

VQC1300

VQC1301

VQC1400

VQC1401

VQC1500

VQC1501

Double

Closed

center

Exhaust

center

Pressure

center

Dual

3-port valve

0.70

0.85

0.70

0.85

0.68

0.70

0.68

0.70

0.85

0.70

2.0

2.2

2.0

2.2

2.0

2.4

3.2

1.8

6.2

7.2

6.2

7.2

5.9

7.0

6.2

7.0

6.2

7.0

2.7

2.8

0.72

1.0

0.72

1.0

0.72

0.65

0.72

1.0

0.72

0.65

0.70

2.6

3.2

2.6

3.2

2.0

2.2

2.6

3.2

2.0

2.2

1.8

6.9

7.3

6.9

7.3

6.3

6.4

6.9

7.3

6.4

7.1

3.7

3.9

12 or less

15 or less

10 or less

15 or less

20 or less

25 or less

20 or less

25 or less

20 or less

25 or less

15 or less

20 or less

13 or less

20 or less

26 or less

33 or less

26 or less

33 or less

26 or less

33 or less

110

VQC2000

Metal seal

Rubber seal

Metal seal

Rubber seal

Metal seal

Rubber seal

Metal seal

Rubber seal

Metal seal

Rubber seal

Single

VQC2100

VQC2101

VQC2200

VQC2201

VQC2300

VQC2301

VQC2400

VQC2401

VQC2500

VQC2501

VQC1 01

Double

Closed

center

Exhaust

center

Pressure

center

2-position3-position

22 or less

24 or less

15 or less

20 or less

29 or less

34 or less

29 or less

34 or less

29 or less

34 or less

25 or less 33 or less

29 or less

31 or less

20 or less

26 or less

38 or less

44 or less

38 or less

44 or less

38 or less

44 or less

VQC4000

Metal seal

Rubber seal

Metal seal

Rubber seal

Metal seal

Rubber seal

Metal seal

Rubber seal

Metal seal

Rubber seal

Metal seal

Rubber seal

Single

Perfect

VQC4100

VQC4101

VQC4200

VQC4201

VQC4300

VQC4301

VQC4400

VQC4401

VQC4500

VQC4501

VQC4600

VQC4601

Double

Closed

center

Exhaust

center

Pressure

center

2-position3-position

20 or less

25 or less

12 or less

15 or less

45 or less

50 or less

45 or less

50 or less

45 or less

50 or less

55 or less

62 or less

22 or less

27 or less

12 or less

15 or less

47 or less

52 or less

47 or less

52 or less

47 or less

52 or less

57 or less

64 or less

230

260

280

500

4-position dual 3-port valve (A)

4-position dual 3-port valve (B)

4-position dual 3-port valve (C)

N.C. N.C.

N.O. N.O.

N.C. N.O.

3-position perfect

(A)

4(B)

(R2)

(P)

(R1)

Dual

3-port valve

Rubber seal VQC2 01 34 or less 44 or less

Note 1) Values represented in this column are in the following conditions:

VQC1000: Cylinder port size C6 without a back pressure check valve

VQC2000: Cylinder port size C8 without a back pressure check valve

VQC4000: Cylinder port size Rc 3/8

Note 2) Values represented in this column are based on JISB8375-1981 (operating with clean air and a supply pressure

of 0.5MPa. Equipped with light and surge voltage suppressor. Values vary depending on the pressure as well as

the air quality.) Values for double types are when the switch is ON.

Symbols

2-position single

2-position double (metal)

2-position double (rubber)

3-position closed center

3-position exhaust center

3-position pressure center

(A)(

4 B)

(P)(R2)

(R1) 3

(A)

4(B)

(P)

(R1) 3

(R2)

(A)

4(B)

(P)

(R1) 3

(R2)

(A)

4(B)

(P)

(R1) 3

(R2)

(A)

4(B)

(P)

(R1) 3

(R2)

(A)

4 (B)

(P)

(R1) 3

(R2)

Models

4, 2→5, 3 (A, B→R1, R2)

1→4, 2 (P→A, B)

2-position

3-position

4-position

Series VQC

Base-Mounted Type

Plug-in Unit

Flow characteristics

0.15

0.20

0.15

0.20

0.15

0.20

0.15

0.20

0.15

0.20

0.15

0.28

0.15

0.28

0.15

0.28

0.15

0.28

0.17

0.28

0.19

0.43

0.19

0.43

0.23

0.34

0.18

0.38

0.18

0.38

––

0.16

0.21

0.16

0.21

0.16

0.21

0.16

0.46

0.55

0.46

0.55

0.46

0.49

0.46

0.49

0.57

0.80

0.46

1.5

2.1

1.5

2.1

1.5

1.9

1.5

1.9

––

0.25

0.30

0.25

0.30

0.25

0.42

0.25

0.30

0.25

0.42

0.20

0.15

0.30

0.15

0.30

0.18

0.31

0.15

0.30

0.18

0.31

0.28

0.17

0.38

0.17

0.38

0.18

0.42

0.17

0.38

0.18

0.38

––

0.18

0.25

0.18

0.25

0.18

0.25

0.18

0.16

0.60

0.80

0.60

0.80

0.46

0.60

0.80

0.46

0.60

0.46

1.7

2.0

1.7

2.0

1.6

1.9

1.7

2.0

1.6

2.0

––

C[dm3/(s•bar)]

bCv

C[dm3/(s•bar)]

bCv

Andere Handbücher für VQC1000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SMC Networks Steuereinheit Handbücher

SMC Networks

SMC Networks EX600-SMJ Series Bedienungsanleitung

SMC Networks

SMC Networks VHS20 Series Bedienungsanleitung

SMC Networks

SMC Networks EX260-SPL1 Bedienungsanleitung

SMC Networks

SMC Networks JSY1000 Series Bedienungsanleitung

SMC Networks

SMC Networks VFS2100 Handbuch

SMC Networks

SMC Networks DXT1215 Bedienungsanleitung

SMC Networks

SMC Networks VQ100 Series Bedienungsanleitung

SMC Networks

SMC Networks EX250-SCF1-X200 Bedienungsanleitung

SMC Networks

SMC Networks XGT312-50336 Series Bedienungsanleitung

SMC Networks

SMC Networks SJ3A6 Series Bedienungsanleitung

SMC Networks

SMC Networks XGTP Series Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC2804WBR Bedienungsanleitung

SMC Networks

SMC Networks LLB4 Bedienungsanleitung

SMC Networks

SMC Networks XLD Series Bedienungsanleitung

SMC Networks

SMC Networks AKP Series Bedienungsanleitung

SMC Networks

SMC Networks VQZ 1000 Handbuch

SMC Networks

SMC Networks VQZ100 Series Bedienungsanleitung

SMC Networks

SMC Networks VP300 Series Bedienungsanleitung

SMC Networks

SMC Networks VQC4000 Bedienungsanleitung

SMC Networks

SMC Networks SY3000 SERIES Installationshandbuch

SMC Networks

SMC Networks IBV1 Series Bedienungsanleitung

SMC Networks

SMC Networks SX10 Series Bedienungsanleitung

SMC Networks

SMC Networks VP500 Series Bedienungsanleitung

SMC Networks

SMC Networks VQD1000 Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung