SMC Networks EZ Connect SMC8014W-G Bedienungsanleitung

Page 1 of 39

SMC8014W-G

User Manual

Page 2 of 39

Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable.

However, no responsibility is assumed by SMC for its use, nor for any infringements of patents

or other rights of third parties which may result from its use. No license is granted by

implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to

change specifications at any time without notice.

SMC Networks, Inc.

20 Mason

Irvine, California 92618

Trademarks

SMC is a registered trademark of SMC Networks, Inc. Other product and company names are trademarks

or registered trademarks of their respective holders.

Page 3 of 39

TABLE OF CONTENTS

CHAPTER 1 | Introduction

Features and Benefits

Package Contents

Minimum Requirements

CHAPTER 2 | Getting to know the EZ Connect™ Wireless Cable Modem Gateway

LED Indicators

Rear Panel Description

Resetting and Restoring the EZ Connect™ Wireless Cable Modem Gateway

CHAPTER 3 | Installation

Basic Installation Procedure

CHAPTER 4 | Configuring your Computer

Configuring Windows 95/98/Me

Configuring Windows 2000

Configuring Windows XP

Configuring Windows Vista

Configuring a Macintosh Computer

CHAPTER 5 | Configuring the EZ Connect™ Wireless Cable Modem Gateway

Browser Configuration

Disable Proxy Connection

Accessing the EZ Connect™ Wireless Cable Modem Gateway Web Management

CHAPTER 6 | Navigating the Web-based Administration

System

LAN

Wireless

NAT

Firewall

Tools

Status

APPENDIX A | Technical Specifications

APPENDIX B | Compliances

APPENDIX C | Technical Support

Page 4 of 39

CHAPTER 1 | Introduction

Congratulations on your purchase of the EZ Connect™ Wireless Cable Modem Gateway. SMC is

proud to provide you with a powerful yet simple communication device for connecting your

local area network (LAN) to the Internet.

Features and Benefits

Internet connection to cable modem service via an integrated cable modem port

Local network connection via 10/100 Mbps Ethernet ports, USB 1.1 port, or 54 Mbps

wireless

802.11g - interoperable with multiple vendors

Wireless WEP, WPA, and WPA2 encryption, Hide SSID, and MAC Filtering

DHCP for dynamic IP configuration, and DNS for domain name mapping

Firewall with Stateful Packet Inspection, client privileges, hacker prevention, DoS, and

NAT

User-definable application-sensing tunnel supports applications requiring multiple

connections

Built-in Parental controls allow you to limit certain web sites –configurable by time

and day

Easy setup through a web browser on any operating system that supports TCP/IP

Compatible with all popular Internet applications

Page 5 of 39

Package Contents

Before installing the EZ Connect™ Wireless Cable Modem Gateway, verify that you have the

items listed below. Also be sure that you have the necessary cabling. If any of the items are

missing or damaged, contact your local SMC distributor.

1 - EZ Connect™ Wireless Cable Modem Gateway

1 - Power adapter (12V/1.25A)

1 - CAT-5 Ethernet cable

Installation CD, including:

oUser Guide

oUSB Drivers

If possible, retain the carton and original packing materials in case there is a need to return

the product.

System Requirements

You must meet the following minimum requirements:

Provisioned Internet access from a cable operator that has approved the SMC8014W-G

A computer equipped with a wired network adapter with TCP/IP installed

A Java-enabled web browser, such as Microsoft Internet Explorer 5.5 or above

Windows 98 Second Edition or higher is required for USB driver support.

Page 6 of 39

CHAPTER 2 | Getting to Know the EZ Connect™ Wireless Cable

Modem Gateway

The EZ Connect™ Wireless Cable Modem Gateway is the perfect all-in-one solution for the home

or business environment. This full-featured device has:

An approved DOCSIS 1.1 and 2.0 cable modem

Advanced SPI Firewall Gateway

High-speed 54 Mbps 802.11g Wireless Access Point

Comprehensive LEDs for network status and troubleshooting

Reset Button

4 –10/100 Mbps Auto-Sensing LAN ports with Auto-MDI/MDIX feature

1 –USB 1.1 LAN Port for PC connectivity

NOTE: Cable modems can provide up to 38 Mbps downstream and 10 Mbps upstream. However,

you should note that the actual rate provided by specific service providers may vary

dramatically from these upper limits.

LED Indicators

The Gateway includes LED indicators on the front panel that simplify installation and network

troubleshooting.

LABEL

LED COLOR

FLASHING

OFF

Power

Green

Power is supplied to the

Gateway

N/A

Power is not

supplied to the

Gateway

Diag

Green

System Failure. Reboot

Gateway

N/A

Normal Operation

Cable

Green

Successfully connected to

the RF network –

upstream ranging

completed

Attempting to

connect to RF

network

N/A

Traffic

Green

Cable Modem has finished

CMTS registration.

Internet connectivity

completed

Attempting to

N/A

WLAN

Green

Wireless Link

Data transmitting

No Wireless Link

LAN (1-4)

Green

Connected at 10 or 100

Mbps

Data transmitting

No Ethernet link

detected

USB

Green

USB port connected

Data transmitting

No USB link detected

Page 7 of 39

Rear Panel Description

Item

Description

Power

Connect the included power adapter to this port.

Reset

Use this button to reset the power or restore the default factory settings.

LAN 1-4

Four 10/100 Auto-sensing switch ports (RJ-45). Connect devices on your local

area network to these ports (such as a PC, hub, or switch).

USB

Connect a USB Cable from your PC to this port.

CATV

Connect your cable line to this port.

Rebooting and Restoring the EZ Connect™ Wireless Cable Modem Gateway

The Reset button is located on the rear panel of the Gateway. Use a paper clip or a pencil tip

to push the Reset button.

Reboot

If the Gateway is having problems connecting to the Internet, simply hold down the reset

button for less than 2 seconds then release.

Restore Factory Defaults

If rebooting the Gateway does not resolve your issue, then you can follow these steps:

1. Leave power plugged into the Gateway.

2. Locate the reset button on the back panel, press and hold button for at least 10 seconds.

3. Release reset button.

Power

Reset

Button

LAN

Ports

CATV

Connector

USB

Page 8 of 39

CHAPTER 3 | Installation

The EZ Connect™ Wireless Cable Modem Gateway can be installed in any location where you

have cable Internet access, and your cable Internet service provider has approved the

Gateway. To confirm you meet these 2 criteria points, please contact your cable operator.

For general installation please follow the guidelines outlined below to best performance:

Allow sufficient air flow around the device to assist in keeping the device as cool as possible

Do not place the Gateway in a dusty or wet environment.

For optimum wireless performance, install the Gateway away from other electronic

devices, such as Monitors / TV / 2.4GHz Cordless Phones. These devices can hamper

your wireless throughput and distance.

Basic Installation Procedure

1. Connect the LAN: You can connect the Gateway to your PC, or to a hub or switch. Run

Ethernet cable from one of the LAN ports on the rear of the Gateway to your computer’s

network adapter or to another network device. You can use either a standard straight

through or crossover Ethernet cable since the Gateway incorporates Auto-MDI/MDIX

functionality.

2. Connect the WAN: Connect a coaxial cable to the CATV port on the back of the Gateway

from a cable port located in your home. When connecting to the CATV port, use only

manufactured coaxial patch cables with F-type connectors at both ends for all connections.

Note: If this modem was NOT installed by your cable provider (ISP) or is being used to

replace another cable modem –please contact your Cable Operator to register the

SMC8014W-G. If the modem is not registered with your cable operator it will be unable to

connect to the cable network system.

3. Power on: Connect the power adapter to the Gateway.

Warning: Only use the power adapter that was provided with the Gateway! Using another

power adapter may damage your unit and void the warranty.

Page 9 of 39

CHAPTER 4 | Configuring your Computer

The information outlined in this chapter will guide you through the configuration for the

following Operating Systems:

Windows 95/98/ Me

Windows 2000

Windows XP

Windows Vista

Apple Macintosh

Configuring Windows 95/98/Me

1. Access your Network settings by clicking

[Start], choose [Settings], and then select

[Control Panel].

2. In the Control Panel, locate and double-click

the [Network] icon.

3. Highlight the TCP/IP line that has been

assigned to your network card on the

[Configuration] tab of the [Network]

properties window. (see network dialog box to

the right)

4. Next, click the [Properties] button to view

that adapter’s TCP/IP settings.

5. From the TCP/IP Properties dialog box, click

the [Obtain an IP address automatically]

option. (see TCP/IP dialog box to the

right)

6. Next click on the [Gateway] tab and verify

the Gateway field is blank. If there are IP

addresses listed in the Gateway section,

highlight each one and click [Remove]

until the section is empty.

7. Click the [OK] button to close the TCP/IP

Properties window.

8. On the Network Properties Window, click

the [OK] button to save these new

changes.

NOTE: Windows may ask you for the

original Windows installation disk or

additional files. Check for the files at

c:\windows\options\cabs, or insert your Windows CD-ROM into your CD-ROM drive and

check the correct file location, for example, D:\win98, D:\win9x. (In this example “D”

is your CD-ROM drive).

9. Windows may prompt you to restart the PC. If so, click the [Yes] button. If Windows

does not prompt you to restart your computer, do so anyway to ensure your settings.

Page 10 of 39

Configuring Windows 2000

1. Access your Network settings by clicking

[Start], choose [Settings], and then

select [Control Panel]

2. In the Control Panel, locate and double-

click the [Network and Dial-up

Connections] icon

3. Locate and double-click the [Local Area

Connection] icon for the Ethernet

adapter that is connected to the

Gateway. When the Status dialog box

window opens, click the [Properties]

button.

4. On the [Local Area Connection]

Properties box, verify the box next to

Internet Protocol (TCP/IP) is checked.

Then highlight the Internet Protocol (TCP/IP), and click the Properties button.

5. Select Obtain an IP address automatically to configure your computer for DHCP. Click

the [OK] button to save this change and close the Properties window.

6. Click the [OK] button again to save these new changes.

7. Reboot your PC.

Configuring Windows XP

The following instructions assume you are running Windows XP with the default interface. If

you are using the Classic interface (where the icons and menus look like previous Windows

versions), please follow the instructions for Windows 2000 outlined above.

1. Access your Network settings by

clicking [Start], choose [Control

Panel], select [Network and Internet

Connections] and then click on the

[Network Connections] icon.

2. Locate and double-click the Local

Area Connection icon for the Ethernet

adapter that is connected to the

Gateway. Next, click the [Properties]

button.

3. On the [Local Area Connection]

Properties box, verify the box next to

Internet Protocol (TCP/IP) is checked.

Then highlight the Internet Protocol

(TCP/IP), and click the Properties

button.

4. Select Obtain an IP address automatically to configure your computer for DHCP. Click

the [OK] button to save this change and close the Properties window.

5. Click the [OK] button again to save these new changes.

Andere Handbücher für EZ Connect SMC8014W-G

Inhaltsverzeichnis

Andere SMC Networks Modem Handbücher

SMC Networks

SMC Networks EZ Connect SMC3056IM V5 Bedienungsanleitung

SMC Networks

SMC Networks EZ Connect SMC7003-USB Bedienungsanleitung

SMC Networks

SMC Networks EZ Connect SMC7003-USB Bedienungsanleitung

SMC Networks

SMC Networks EZ Connect SMC2642W Bedienungsanleitung

SMC Networks

SMC Networks 7804WBRB - annexe 1 Bedienungsanleitung

SMC Networks

SMC Networks EZ Connect SMC8014W-G Bedienungsanleitung

SMC Networks

SMC Networks EZ Connect Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC7401BRA Bedienungsanleitung

SMC Networks

SMC Networks 7804WBRB - FICHE TECHNIQUE Bedienungsanleitung

SMC Networks

SMC Networks SMCD3CM Bedienungsanleitung

SMC Networks

SMC Networks SMC7800A Bedienungsanleitung

SMC Networks

SMC Networks 7901BRA - FICHE TECHNIQUE Produktinformationsblatt

SMC Networks

SMC Networks Barricade SMC7904BRB2 Bedienungsanleitung

SMC Networks

SMC Networks WBR11S-3GN Bedienungsanleitung

SMC Networks

SMC Networks EZ Connect SMC7003-USB Bedienungsanleitung

SMC Networks

SMC Networks 7003-PCI Bedienungsanleitung

SMC Networks

SMC Networks WBR14S-3GN Bedienungsanleitung

SMC Networks

SMC Networks EZ Connect SMC8014 Bedienungsanleitung

SMC Networks

SMC Networks EZ Connect SMC8014W-G Bedienungsanleitung

SMC Networks

SMC Networks SMC8511 Bedienungsanleitung

SMC Networks

SMC Networks SMC EZ Connect SMC70032AE Bedienungsanleitung

SMC Networks

SMC Networks EZ Connect SMC7003USB V.2 Bedienungsanleitung

SMC Networks

SMC Networks SMCD3GN-RRR Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604 Gebrauchs- und Pflegehandbuch

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung