Smeg DW1410 Bedienungsanleitung

INSTRUCTION MANUAL

DISHWASHER

Contents

1. Safety and operating instructions__________________________ 32

2. Installation and hook-up _________________________________ 35

3. Description of the controls _______________________________ 37

4. Operating instructions __________________________________ 42

5. Cleaning and maintenance_______________________________ 53

6. Troubleshooting _______________________________________ 57

Thank you for choosing this product.

We advise you to carefully read all the instructions contained in this

manual, in order to understand how to operate your dishwasher safely

and correctly.

The manual is divided into paragraphs, which provide a step by step

description of the dishwasher functions, with clear instructions

accompanied by detailed illustrations.

Recommendations are given for the correct use of the baskets, spray

arms, containers, filters, washing programs, and for operating the

controls.

Follow the recommended cleaning procedures to ensure that your

dishwasher always remains in perfect working order.

This manual provides a quick and easy reference for answering all your

questions concerning the use of your new dishwasher.

INSTALLATION INSTRUCTIONS: these are intended for the qualified

technician who must carry out the installation, hook-up and testing of

the appliance.

USER INSTRUCTIONS: these consist of recommendations for using the

appliance, a description of its controls and of the correct cleaning and

maintenance procedures.

Safety instructions

1. Safety and operating instructions

THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE: IT MUST

ALWAYS BE KEPT INTACT TOGETHER WITH THE DISHWASHER. BEFORE

USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS

CONTA INED IN THIS MA NUAL.

INSTALLATION MUST BE PERFORMED BY A QUALIFIED TECHNICIAN, IN

COMPLIANCE WITH THE REGULATIONS IN FORCE. THIS APPLIANCE IS

INTENDED FOR DOMESTIC USE, AND COMPLIES WITH THE EEC

DIRECTIVES 72/23, 897336 (INCLUDING 92/31) CURRENTLY IN FORCE,

INCLUDING THE PREVENTION AND ELIMINATION OF RADIO FREQUENCY

INTERFERENCE.

THE APPLIANCE IS DESIGNED FOR THE FOLLOWING PURPOSE: WASHING

AND DRYING OF DISHES; ANY OTHER USE SHALL BE CONSIDERED

IMPROPER. THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR

USES OTHER THAN THOSE DESCRIBED ABOVE.

THE NAME PLATE FEATURING THE TECHNICAL DATA, SERIAL NUMBER

AND MARKINGS IS VISIBLY POSITIONED ON THE INNER EDGE OF THE

DOOR. THE NAME PLATE ON THE INNER EDGE OF THE DOOR MUST

NEVER BE REMOVED.

DO NOT LEAVE THE DISCARDED PACKAGING MATERIALS UNSUPERVISED

WITHIN THE HOME. SEPARATE THE VARIOUS MATERIALS WHICH MAKE

UP THE PACKAGING AND TAKE THEM TO THE NEAREST SORTED WASTE

COLLECTION CENTRE.

THE APPLIANCE MUST BE PROVIDED WITH AN EARTH CONNECTION IN

ACCORDANCE WITH THE ELECTRICAL SAFETY REGULATIONS IN FORCE.

THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAMAGE TO

PERSONS OR PROPERTY RESULTING FROM THE FAILURE TO EARTH THE

APPLIANCE OR FROM A DEFECTIVE EARTH CONNECTION.

IF THE APPLIANCE IS NOT CONNECTED TO THE ELECTRICAL POWER

SUPPLY BY MEANS OF A PLUG, IT IS NECESSARY TO INSTALL AN

ISOLATION SWITCH WITH A CONTACT OPENING GAP OF AT LEAST 3 MM.

THE PLUG ON THE POWER CORD AND THE CORRESPONDING SOCKET

OUTLET MUST BE OF THE SAME TYPE, AND MUST CONFORM TO THE

REGULATIONS IN FORCE. CHECK THAT THE VOLTAGE AND FREQUENCY

OF THE ELECTRICAL POWER SUPPLY MATCH THE RATINGS ON THE

NAME PLATE. AVOID USING ADAPTORS OR SHUNT CONNECTIONS.

NEVER UNPLUG THE APPLIANCE BY PULLING THE POWER CORD.

Safety instructions

•AFTER INSTALLATION, THE PLUG MUST REMAIN ACCESSIBLE.

•IN THE EVENT OF DAMAGE TO THE POWER CORD, HAVE IT

REPLACED BY A QUALIFIED TECHNICIAN.

•AFTER CHANGING THE POWER CORD, MAKE SURE THAT THE

BRACKET WHICH SECURES THE CORD IS FIXED SECURELY IN

PLACE.

IF THE APPLIANCE IS INSTALLED ON A CARPETED OR COVERED FLOOR,

ENSURE THAT THE OPENINGS ON ITS UNDERSIDE ARE NOT

OBSTRUCTED.

ALWAYS SWITCH OFF THE DISHWASHER AFTER EACH USE TO AVOID

WASTING ELECTRICITY.

OBSOLETE APPLIANCES MUST BE RENDERED UNUSABLE. CUT OFF THE

MAINS POWE R CORD AFTER U NPLUGGING IT FROM THE WALL OUTLE T,

AND MAKE SAFE ANY COMPONENTS WHICH MIGHT BE DANGEROUS FOR

CHILDREN (LOCKS, DOORS, ETC.). THE APPLIANCE MUST THEN BE TAKEN

TO A SORTED WASTE COLLECTION CENTRE.

IN THE EVENT OF A FAULT, DISCONNECT THE DISHWASHER FROM THE

ELECTRICAL POWER SUPPLY AND SHUT OFF THE WATER TAP. THEN

CALL IN A QUALIFIED TECHNICIAN.

DO NOT USE APPLIANCES WHICH HAVE BEEN DAMAGED DURING

TRA NS IT! IF IN DOUBT, CONSUL T YOUR DEALER.

THE APPLIANCE MUST BE INSTALLED AND CONNECTED IN ACCORDANCE

WITH THE INSTRUCTIONS PROVIDED BY THE MANUFACTURER OR BY A

QUALIFIED TECHNICIAN.

THE APPLIANCE IS INTENDED FOR USE BY ADULTS. DO NOT ALLOW

CHILDREN TO COME NEAR OR PLAY WITH THE DISHWASHER. KEEP

CHILDREN AWAY FROM DETERGENTS AND FROM THE OPEN

DISHWASHER DOOR. THE PACKAGING MATERIALS (PLASTIC BAGS,

POLYSTYRENE, METAL BARS, ETC.) MUST NOT BE LEFT WITHIN THE

REACH OF CHILDREN.

KEEP CHILDREN AWAY FROM THE OPEN DISHWASHER. THE APPLIANCE

MAY CONTAIN RESIDUES OF DETERGENT WHICH CAN CAUSE

IRREVERSIBLE DAMAGE TO THE EYES, MOUTH, AND THROAT, AS WELL

AS POSSIBLE DEATH BY SUFFOCATION.

DO NOT INTRODUCE SOLVENTS SUCH AS ALCOHOL OR TURPENTINE

WHICH MAY CAUSE AN EXPLOSION.

DO NOT LOAD DISHES THAT ARE SOILED WITH ASH, WAX OR PAINTS.

Safety instructions

LEANING OR SITTING ON THE DISHWASHER DOOR WHEN OPEN MAY

CAUSE THE APPLIANCE TO OVERTURN, PUTING PEOPLE AT RISK.

DO NOT DRINK THE WATER RESIDUES WHICH MAY BE PRESENT INSIDE

THE DISHES OR DISHWASHER AT THE END OF THE WASHING PROGRAM

AND BEFORE THE DRYING CYCLE.

KNIVES OR OTHER SHARP-ENDED COOKING UTENSILS MUST BE PLACED

IN THE CUTLERY BASKET BLADE-DOWN, OR LAID HORIZONTAL IN THE

TOP BASKET. TAKE CARE NOT TO CUT YOURSELF AND ENSURE THAT

THEY DO NOT PROJECT FROM THE BASKET.

AQUASTOP MODELS

THE AQUASTOP DEVICE PREVENTS FLOODING IN THE EVENT OF A

WATER LEAK. WHEN THE AQUASTOP DEVICE IS TRIPPED, CALL IN A

QUALIFIED TECHNICIAN TO IDENTIFY AND REPAIR THE FAULT.

IN MODELS EQUIPPED WITH THE AQUSTOP DEVICE, THERE IS A

SOLENOID VALVE INSIDE THE WATER INTAKE HOSE. DO NOT CUT THE

HOSE AND DO NOT ALLOW THE SOLENOID VALVE TO DROP INTO

WATER. IN THE EVENT OF DAMAGE TO THE WATER INTAKE HOSE,

DISCONNECT THE APPLIANCE FROM THE ELECTRICAL POWER SUPPLY

AND FROM THE WATER SUPPLY.

IMMEDIATELY AFTER INSTALLING THE DISHWASHER, PERFORM A QUICK

TEST OF THE APPLIANCE FOLLOWING THE INSTRUCTIONS BELOW. IF

THE DISHWASHER FAILS TO OPERATE CORRECTLY, DISCONNECT IT

FROM THE ELECTRICAL POWER SUPPLY AND CALL THE NEAREST

TECHNICAL SERVICE CENTRE. DO NOT ATTEMPT TO REPAIR THE

APPLIANCE.

THE DISHWASHER MEETS ALL THE REQUIREMENTS SET OUT BY THE

REGULATIONS IN FORCE CONCERNING SAFETY AND ELECTRICAL

EQUIPMENT. ANY TECHNICAL CHECKS SHOULD BE CONDUCTED

EXCLUSIVELY BY A TRAINED AND AUTHORISED TECHNICIAN: REPAIRS

CARRIED OUT BY UNAUTHORISED PERSONS WILL INVALIDATE THE

WARRANTY, AS WELL AS POSING A POTENTIAL HAZARD TO THE USER.

The manufacturer declines all responsibility for damage to persons or property

resulting from failure to observe the above precautions, from tampering with

even a single component of the appliance, or from the use of non original

spare parts.

Installation instructions

2. Installation and hook-up

Remove the polystyrene basket retainers. Position the appliance in the

desired place of installation. The back or sides of the dishwasher may be

placed up against walls or other furniture units. If the dishwasher is installed

near a heat source, fit the special insulating panel to prevent overheating

and malfunction of the appliance. To ensure stability, install integrated or

built-under dishwashers only under continuous worktops, and screw them

to the adjacent units. To facilitate the installation procedure, the intake and

drain hoses can be positioned in any direction; make sure that the hoses

are not kinked, crushed or pulled too tightly. A hole at least 8 cm in

diameter is required to allow the power supply cable and pipes to pass.

Level the appliance on the floor using its adjustable feet. This operation

is essential for ensuring correct operation of the dishwasher.

Some models are equipped with only one adjustable foot at the rear,

which can be adjusted by turning the screw on the lower front part of the

appliance.

2.1 Water supply connection

Preventing the risk of clogging or damage: if the water pipe is new or

has not been used for a long time, before connecting to the water supply

check that the water is clear and free of impurities, to prevent damage to

the appliance.

The dishwasher must always be connected to the water system

with new hoses; old or used hoses must never be reused.

CONNECTING TO THE WATER SUPPLY

Connect the intake hose to a cold water supply

with ¾” gas thread, inserting the filter Asupplied

with the dishwasher.

Take care to screw the hose firmly into place

with your hands and then complete by

tightening about ¼ of a turn with pliers.

In dishwashers equipped with the

ACQUASTOP device, the filters is already

fitted inside the threaded ring.

Installation instructions

The dishwasher can also be connected to a hot water supply not

exceeding 60°C. Supplying the appliance with hot water cuts down the

washing time by approximately 20 minutes, but slightly reduces its

effectiveness. Make the connection to the domestic hot water supply

using the same procedure described for connecting to the cold water

supply.

DRAIN CONNECTION

Insert the dishwasher’s drain

hose into a drain pipe having a

diameter of at least 4 cm, or

alternatively, place it inside the

kitchen sink using the plastic

support provided, taking care not

to crush or excessively bend the

hose. It is important to prevent

the hose from coming loose and

falling. For this purpose, the

plastic support is equipped with a

hole for tying it to the wall or

water tap.

The free end should be positioned at a height of between 30 and 100

cm,and should never be submerged in water.

If a horizontal drain extension hose is used (for a maximum of 3 m) the

drain hose can be placed at a maximum height of 85 cm from the

ground.

2.2 Electrical connection

Plug the power cord into a suitable electrical outlet, according to the

instructions given in chapter "1. Safety and operating instructions".

User instructions

3. Description of the controls

3.1 Upper panel

All the dishwasher controls are grouped on the upper panel.

Version equipped wi th DELAYED START function

Version equipped wi th ECO DRY

function

1ON/OFF button

Pressi ng this button ener gises the appliance.

SELECTED PROGRAM indicator lights

Illumination of this light denotes the program selec ted and the

occurrence of a fault (troubleshooting).

PROGRAM SELECTION button

By pressing this button in sequence it is possible to select the desired

program.

4SALT WARNING light (certain models only)

Illumination of this light signals that salt container is empty.

5RINSE AID WARNING light (certain models only)

Illumination of this light signals that rinse aid dispenser is empty.

DELAYED START button (certain models only)

Pressi ng this button in sequence delays the start of the program by 3, 6

or 9 hour s.

7DELAYED START lights (certain models only)

Illuminate to show that start delayed by 3, 6 or 9 hours has been set.

8ECO DRY button (certain models only)

Activates the eco dry function. See note to programs table.

9ECO DRY light (certain models only)

Illuminates to indicate that the function is activated.

User instructions

SETTING THE WASHING PROGRAM AND SWITCHING ON

To select the most suitable program for the dishes to be washed refer to

the table below, which indicates the most appropriate program according

to dish type and degree of soiling.

After using the table to identify the most appropriate washing program:

•press the

ON/OFF button (1) and wait for the PROGRAM

INDICATOR LIGHT (2) to illuminate;

•keep pressing the PROGRAM SELECTION button (3) until the

indicator light corresponding to the desired program illuminates;

•close the door; the machine will automatically begin the washing

program after the sounding of the acoustic device.

PROGRAMME,

NUMBER & SYMBOL

LOAD CROCKERY AND CUTLERY PROGRAM

PROGRESS

1SOAK Pans and dishes aw aiting a further

wash Cold prewash

2DELICATE Wash immediately after use for dishes

with light dirt

Wash at 45°C

Cold rinse

Rinse at 67°C

Dry

3BIO (*)

EN 50242

Wash immediately after use for dishes

with normal dirt

Wash at 55°C

Cold rinse

Rinse at 67°C

Dry

4NOR MAL Dishes with normal dirt

Cold prewash

Wash at 65°C

Cold rinse

Rinse at 67°C

Dry

5INTENSIVE Very dirty pans and dishes (except

delicate items)

Prewash at 45°C

Wash at 67°C

2 cold rinses

Rinse at 70°C

Dry

Only run the soak program with half loads.

(*) Reference program as per EN 50242 standard.

ECO DRY function (8) (for relevant models)

Eco dry can be selected in all programs except the soak program. This extends the

program's duration by about 25 minutes, but cuts energy consumption thanks to the lower

rinse temperature.

User instructions

The washing cycle will not take place if the dishwasher door is left open

or not properly closed.

TABLE FOR CERTIFICATION BODIES

Reference standard EN 50242

Reference program BIO (*)

Load 10 place-settings

Type of detergent B

Amount of detergent 25 g

Rinse aid setting Depending on the model 3/4 or 4/6

(*) For the relevant models: the ECO DRY function (8) must be activated.

EN 50242

The upper basket must be set in the low position.

3.2 Washing programs

Before starting a washing program make sure that:

•The water supply tap is open.

•The correct amount of detergent has been added to the

dispenser.

•The baskets have been correctly loaded.

•The spray arms are able to rotate freely and without

obstruction.

•The dishwasher door is securely closed.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Smeg Spülmaschine Handbücher

Smeg

Smeg LSP4325XDE Bedienungsanleitung

Smeg

Smeg Dishwasher 85028 Bedienungsanleitung

Smeg

Smeg STA6539L3 Bedienungsanleitung

Smeg

Smeg LVS262DSX Bedienungsanleitung

Smeg

Smeg Dishwasher LSA643BPQ Bedienungsanleitung

Smeg

Smeg LS6147XH7 Bedienungsanleitung

Smeg

Smeg PL60XME1 Bedienungsanleitung

Smeg

Smeg LSA6450B Bedienungsanleitung

Smeg

Smeg LVS4334XIN Bedienungsanleitung

Smeg

Smeg DF41 Bedienungsanleitung

Smeg

Smeg Dishwasher DWD64.1BL Bedienungsanleitung

Smeg

Smeg STO900 Bedienungsanleitung

Smeg

Smeg GM274-110 Betriebsanleitung

Smeg

Smeg LSA645X Bedienungsanleitung

Smeg

Smeg Dishwasher CA01-3 Bedienungsanleitung

Smeg

Smeg LS9209A-3 Bedienungsanleitung

Smeg

Smeg GM287-110 Bedienungsanleitung

Smeg

Smeg PL313NE Bedienungsanleitung

Smeg

Smeg KAB45-1 Bedienungsanleitung

Smeg

Smeg DDW114 Bedienungsanleitung

Smeg

Smeg HTY511DSH Bedienungsanleitung

Smeg

Smeg CSE68X3 Bedienungsanleitung

Smeg

Smeg STE8639L Bedienungsanleitung

Smeg

Smeg CWC 611 Bedienungsanleitung

Beliebte Spülmaschine Handbücher anderer Marken

Electrolux

Electrolux ESI5211LOX Bedienungsanleitung

KitchenAid

KitchenAid KUDB230B Bedienungsanleitung

Brandt

Brandt BDJ424DB Bedienungsanleitung

Asko

Asko DSD767UXXL.AU Bedienungsanleitung

Beko

Beko DFN26210W Bedienungsanleitung

NEFF

NEFF S153ITX00E Technisches Datenblatt

Midea

Midea SV 4.45 wi Bedienungsanleitung

LG LDF7932 Bedienungsanleitung

Gorenje

Gorenje GV63214 Bedienungsanleitung

Hotpoint

Hotpoint HDA1100ZWH Service-Handbuch

Blomberg

Blomberg LDFN2240W Bedienungsanleitung

AEG

AEG FFB83836PM Bedienungsanleitung

Cylinda

Cylinda DM3220RFD Bedienungsanleitung

Atag

Atag DW8214MB Bedienungsanleitung

GE GLD8000 Series Bedienungsanleitung

Siemens

Siemens SN23HI02KE Technisches Datenblatt

Omega

Omega ODW717X Bedienungsanleitung

BORETTI

BORETTI BVW-683 Bedienungsanleitung