Smeg PLA68XU Bedienungsanleitung

INSTRUCTION MANUAL

Rev 0.0 1

CONTENTS EN

Contents

1 INTRODUCTION ........................................................................................ 3

2 DESCRIPTION AND USE OF THE CONTROLS.......................................... 5

2.1 Front panel................................................................................................. 5

2.2 Setting the washing program and switching on and off............................... 6

2.2.1 Switching on .............................................................................................. 8

2.2.2 Selecting and starting the program............................................................. 8

2.2.3 End of program .......................................................................................... 9

2.2.4 Interrupting a program................................................................................ 9

2.2.5 Changing the current program ................................................................... 9

2.2.6 Canceling the current program ................................................................. 10

2.2.7 Options .................................................................................................... 10

2.2.8 Switching off ............................................................................................ 12

2.3 Additional functions.................................................................................. 12

2.3.1 Adjusting the water softener..................................................................... 12

3 ENERGY SAVING AND ENVIRONMENTAL RESPECT.............................. 14

3.1 Reducing the consumption of detergent and respecting the environment.14

4 REMOVING THE DISHES......................................................................... 15

5 TROUBLESHOOTING .............................................................................. 16

2 Rev 0.0

Rev 0.0 3

INTRODUCTION EN

1 INTRODUCTION

Thank you for choosing one of our products. To use this dishwasher

correctly and safely, please read this manual carefully. The manual is

divided into sections giving you a step-by-step guide to all your ap-

pliance’s functions. The texts are easy to understand and are com-

plete with detailed illustrations. This user-friendly manual will provide

answers to all your questions about use of the dishwasher.

Before using this dishwasher, carefully read chapter 2 “Use and

safety warnings” of the attached general manual.

For any other information about use and maintenance of the dish-

washer, read the enclosed general manual carefully.

This manual comprises the following sections:

INTRODUCTION: general information about the manual.

USER INSTRUCTIONS: advice on using the washing programs and

information about all the dishwasher functions.

Nomenclature of ﬁgures and tables:

The progressive number of each ﬁgure is shown in the bottom right-

hand corner of the relative box. An example of a progressive number

is “Fig. 4-01”, where the ﬁrst number (4) indicates the section to

which the ﬁgure belongs, while the second number (01) indicates

the progressive number of the ﬁgure in section 4 (Fig. 4-01 is the

ﬁrst ﬁgure in section 4). The tables are numbered in the same way,

bearing in mind that “Tab.” is used instead of “Fig.” (e.g.: Tab. 4-01

is the ﬁrst table in section 4). If a table occupies more than one page,

a letter is added after the progressive number (e.g.: “Tab. 4-01a”,

Tab. 4-01b”).

4 Rev 0.0

INTRODUCTION

Symbols used in this manual (see tab. 1-01)

DANGER. This symbol highlights information and warnings which, if not

observed, may compromise personal safety or damage the appliance.

This symbol highlights general information and warnings.

Tab. 1-01

Rev 0.0 5

USER INSTRUCTIONS EN

2 DESCRIPTION AND USE OF THE CONTROLS

2.1 Front panel

All the dishwasher controls are grouped on the front panel (see ﬁg. 2-01).

A brief description (see tab. 2-01) of the various elements on the front panel is

given below.

1326

789 10 4

1On/Off button

2Start/Pause button

3Program selection button

4Program indicator lights

5Sanitation indicator light

6Program delay button

7Program delay indicator lights

8No salt indicator light

9No rinse-aid indicator light

10 Recessed door handle

Tab. 2-01

Fig. 2-01

6 Rev 0.0

USER INSTRUCTIONS

2.2 Setting the washing program and switching

on and off

The dishwasher is equipped with a control panel (see ﬁg. 2-02) which is used

to program the appliance and switch it on and off.

132

789 4

To select the most suitable program for the dishes to wash, consult the fol-

lowing tables which specify the most appropriate type of washing sequence

depending on the kind of dishes and how dirty they are (see tab. 2-02).

Fig. 2-02

Rev 0.0 7

USER INSTRUCTIONS EN

PROGRAM NUMBER

AND SYMBOL

DISHES AND

CUTLERY

PROGRAM

SEQUENCE

TIME CONSUMPTION

MINUTES

(1)

WATER POWER

KWh (1)

RINSE

PANS AND

DISHES

WAITING

FOR THE

LOAD TO BE

COMPLETED

Cold pre-wash. 16’ 6.5 l

1.64 gal. 0.03

CRISTAL SLIGHTLY

DIRTY DISHES

Wash at 45°C

(113°F).

Cold rinse.

Rinse at 69°C

(156.2°F).

Dry.

66’ 13.7 l

3.62 gal. 0.6

NORMAL

SLIGHTLY

DIRTY PANS

AND DISHES

BUT WITH

DRIED-ON

RESIDUE

Wash at 50°C

(122°F).

Rinse at 68°C

(154.4°F).

Dry.

110’ 14 l

3.67 gal. 0.8

DAILY

WASH

DIRTY PANS

AND DISHES

WITH DRIED-

ON RESIDUE

Cold pre-wash.

Wash at 65°C

(149°F).

Cold rinse.

Rinse at 69°C

(156.2°F).

Dry.

100’ 18.2 l

4.8 gal. 0.85

EXTREME

WASH

ETL

SANITATION

LISTED

VERY DIRTY

PANS AND

DISHES WITH

DRIED-ON

RESIDUE

Pre-wash at

45°C (113°F).

Wash at 70°C

(158°F).

2 cold rinses.

Rinse at 70°C

(158°F).

Dry.

117’ 22 l

5.8 gal. 0.98

Tab. 2-02

(1) The cycle times listed in the use and care manual are based on normal soil loads and 120°F

(49°C) incoming water and will vary based on your actual conditions.

- Only “EXTREME WASH” program conform to NSF std 184 and is certiﬁed by INTERTEK with the

ETL SANITATION LISTED.

- When the “Sanitized” light shine it means that the dishwasher and its contents have been sani-

tized according to the requirements of the National Sanitation Foundation (NSF).

8 Rev 0.0

USER INSTRUCTIONS

Only run a soak program with half loads.

After using the above table to choose the most suitable washing cycle, pro-

gram the appliance.

Before starting a washing program, make sure that:

The water supply tap is open.

There is regenerating salt in the water softener tank (to add

salt, see the instructions in the general manual).

The correct amount of detergent has been added to the dis-

penser (to add detergent, see the instructions in the general

manual).

The spray arms are able to rotate freely and without obstruc-

tion.

The racks have been correctly loaded (see the instructions in

the general manual).

The dishwasher door is securely closed.

2.2.1 Switching on

Press on/off (ref. 1 ﬁg. 2-02) to start the dishwasher; the indicator lights show

the “status” of the dishwasher.

2.2.2 Selecting and starting the program

Programming operations can only be performed with the door clo-

sed. With the door open, the program indicator lights (ref. 4 ﬁg. 2-

02) remain off.

Press the program selection button (ref. 3 ﬁg. 2-02) several times until the

indicator light corresponding to the required program turns on (ref. 4 ﬁg. 2-

02);

if necessary, press the relative buttons to select the complementary func-

tions you wish to use (e.g. “Programming delay”);

to start the dishwasher, press the start/pause button (ref. 2 ﬁg. 2-02) for a

few seconds until the indicator light of the selected program starts ﬂashing

(conﬁrmation beep);

Program status is indicated by the indicator light ﬂashing throughout the

cycle.

If the door of the dishwasher has not been closed or has been incor-

rectly closed, the washing cycle will not begin.

•

Rev 0.0 9

USER INSTRUCTIONS EN

If you open the door while the appliance is working, you must close

it and start the program again by pressing start/pause (ref. 2 ﬁg.

2-02). The program will resume from where it was interrupted.

If the temperature in the tray exceeds 50°C (122°F), the program will

resume after about 30 seconds.

2.2.3 End of program

The end of the program is signaled by a short beep. Additionally, the indica-

tor light of the “daily wash” and “extreme wash” programmes (marked “end”)

ﬂashes.

2.2.4 Interrupting a program

To interrupt the current program:

press the start/pause button (ref. 2 ﬁg. 2-02); the indicator light of the cur-

rent program remains on (conﬁrmation beep); at this point, start the cycle by

pressing start/pause (ref. 2 ﬁg. 2-02), or change or cancel the program.

2.2.5 Changing the current program

To change the current program:

interrupt it (see para 2.2.4 “Interrupting a program”);

select a new program (see para 2.2.2 “Selecting and stating a program”).

•

Inhaltsverzeichnis

Andere Smeg Spülmaschine Handbücher

Smeg

Smeg LVS329SX Bedienungsanleitung

Smeg

Smeg STA945-3 Bedienungsanleitung

Smeg

Smeg GM287-120 Bedienungsanleitung

Smeg

Smeg STLA825A-2 Bedienungsanleitung

Smeg

Smeg LVF32G Bedienungsanleitung

Smeg

Smeg Dishwasher 85028 Bedienungsanleitung

Smeg

Smeg BLV1NE BLV1NE Bedienungsanleitung

Smeg

Smeg DF613SDX Bedienungsanleitung

Smeg

Smeg LSP1453B Bedienungsanleitung

Smeg

Smeg DWF410SS Bedienungsanleitung

Smeg

Smeg ST4108 Bedienungsanleitung

Smeg

Smeg PL 942 EB Bedienungsanleitung

Smeg

Smeg Universale LVS533PXIN Bedienungsanleitung

Smeg

Smeg Dishwasher CSU2001B1 Bedienungsanleitung

Smeg

Smeg LVD613X Bedienungsanleitung

Smeg

Smeg CWH510D Bedienungsanleitung

Smeg

Smeg DI912 Bedienungsanleitung

Smeg

Smeg 4060 Series Bedienungsanleitung

Smeg

Smeg GS65-2VI Bedienungsanleitung

Smeg

Smeg DC22P Bedienungsanleitung

Smeg

Smeg LVS60ELMN Bedienungsanleitung

Smeg

Smeg PL292DN Bedienungsanleitung

Smeg

Smeg DWD64.1SS Bedienungsanleitung

Smeg

Smeg LS645XNL2 Leitfaden

Beliebte Spülmaschine Handbücher anderer Marken

Electrolux

Electrolux ESI5211LOX Bedienungsanleitung

KitchenAid

KitchenAid KUDB230B Bedienungsanleitung

Brandt

Brandt BDJ424DB Bedienungsanleitung

Asko

Asko DSD767UXXL.AU Bedienungsanleitung

Beko

Beko DFN26210W Bedienungsanleitung

NEFF

NEFF S153ITX00E Technisches Datenblatt

Midea

Midea SV 4.45 wi Bedienungsanleitung

LG LDF7932 Bedienungsanleitung

Gorenje

Gorenje GV63214 Bedienungsanleitung

Hotpoint

Hotpoint HDA1100ZWH Service-Handbuch

Blomberg

Blomberg LDFN2240W Bedienungsanleitung

AEG

AEG FFB83836PM Bedienungsanleitung

Cylinda

Cylinda DM3220RFD Bedienungsanleitung

Atag

Atag DW8214MB Bedienungsanleitung

GE GLD8000 Series Bedienungsanleitung

Siemens

Siemens SN23HI02KE Technisches Datenblatt

Omega

Omega ODW717X Bedienungsanleitung

BORETTI

BORETTI BVW-683 Bedienungsanleitung