Smith & Noble Skylight Bedienungsanleitung
Cellular Shades
Skylight
STEP BY STEP INSTALLATION INSTRUCTIONS
Smart | Shades
12
smithandnoble.com
800.248.8888
Table of Contents
Step 1 - Getting Started ..................................3
Overview - Motorized Cellular Skylight .......................4
Step 2 - Battery Pack Placement ...........................5
Step 3 - Installing the Brackets ............................6
Step 4 - Installing the Top Rail.............................7
Step 5 - Installing the Bottom Rail .........................8
Step 6 - Removing the Shade .............................9
Step 7 - Installing the Tracks .............................10
Step 8 - Leveling the Shade..............................11
Smart Shades Operang & Programming Guide ............... 12-21
Install Solar Panel
(oponal)
................................ 22-24
Troubleshooting ...........................................25
Care & Cleaning ...................................Back Cover
Safety .............................................Back Cover
Warranty ..........................................Back Cover
A Smooth Set-Up
We want you to love your new window coverings and
that includes having a smooth installation experience.
We
recommend saving this guide. If you encounter any difculties
or questions, please reach out to us for help. It’s why we’re here.
Call us at 800.248.8888
for more info on installation.
We recommend you hold on to all packaging until your
window coverings are fully installed. Should something go
wrong (we strongly doubt it), we want any potential returns to
be a painless as possible.
Customer Service Hours
Monday — Friday: 6am — 6pm PT
Saturday — Sunday: 7am — 4pm PT
smithandnoble.com
Everything
You Need
34
smithandnoble.com
800.248.8888
First, make sure you have all the parts and tools required to install your shades.
ALL THE HARDWARE YOU’LL NEED:
Pencil, screw-driver, ¼” nut driver, level, and a drill with a 1⁄16” drill bit.
Then nd wooden studs where you’ll want to attach the brackets; if you need to mount your
shades to wallboard or plaster, use a secure fastener designed for hollow wall applications. For
metal surfaces, pre-drill holes and use the included screws. For concrete, stone, brick, or tile
surfaces, use a masonry drill and appropriate plugs, anchors, or screws. Additional fasteners
other than those sent with your shade may be required.
It’s important when selecting a fastener to make sure it’s designed to support the weight of the
shade. Follow the fastener manufacturer’s instruction from there on out.
Getting Started
Smart | Shades Cellular Skylight
LEVEL
(NOT INCLUDED)
SCREWS CABLE TIES + BASE
SCREWDRIVERS
(NOT INCLUDED)
POWER DRILL & LEVEL
(NOT INCLUDED)
MOUNTING BRACKETS
OVERVIEWSTEP 1 — PARTS & TOOLS
PENCIL
(NOT INCLUDED)
56
smithandnoble.com
800.248.8888
Shades are shipped with the required
number of brackets for proper
installation. End brackets should be
located approximately 3" from either
end.
Depending on the width of the shade,
additional brackets may be necessary,
evenly spaced between the two end
brackets.
Placement of Battery Pack
Shades 20" wide and wider have the
rechargeable battery inside the head rail.
Shades under 20" wide require the
rechargeable battery to be mounted on
the back of the head rail. This requires an
additional 1⁄2" clearance for mounting.
STEP 3 — INSTALLING THE BRACKETS
STEP 2 — BATTERY PACK PLACEMENT
Using the mounting bracket as a template,
measure to the edge of the bracket and
mark the hole locations with a pencil for
drilling. When mounting brackets, make
sure they are in line with each other.
3"
MOUNTING
BRACKETS
SHADES UNDER 20" WIDE 1/2"
BRACKET MOUNTING
78
smithandnoble.com
800.248.8888
Start with the top rail/fabric assembly.
The top rail is the rail with the motor
in it.
Position the rail with the front lip (A)
resting on the hooks of all the brackets.
Push the rail firmly up and toward the
window until the groove on the rail
snaps into place, (B) as shown.
STEP 4 — INSTALLING THE TOP RAIL
A
B
A
B
HEADRAIL
TOP RAIL
BOTTOM RAIL
SHADE
Use the remote to lower the bottom
rail all the way down so that it can be
attached to the bottom brackets.
Select the desired channel with the
CHANNEL key. The channel indicator
light will illuminate the channel that is
on. If all 5 lights are lit, the remote will
control all 5 channels at once.
Press the DOWN key to lower the shade.
Position the rail with the front lip (A)
resting on the hooks of all the brackets.
Push the rail rmly down and toward the
window until the groove on the rail snaps
into place, (B) as shown.
STEP 5 — INSTALLING THE BOTTOM RAIL
A
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL
RAIL
SELECTOR
FRONT OF
STANDARD REMOTE
B
910
smithandnoble.com
800.248.8888
To remove a shade, insert a flat blade
screwdriver between the rail and
the bottom back of the bracket (tab
which extends out slightly from each
bracket).
Gently pry the screwdriver to release
the bracket from the headrail. Take
care not to damage the painted finish
of the headrail.
As you release the brackets, support
the headrail to keep it from falling.
STEP 6 — REMOVING THE SHADE
Insert screwdriver
and gently pry
Place the track against the front of the
top and bottom rails. Attach the track
with the screws provided. Space the
screws no more than 12" apart.
Follow the same procedure for the
other track. Make sure that the 2 tracks
are parallel to each other.
STEP 7 — INSTALLING THE TRACKS
ATTACHMENT
SCREWS
FRONT OF
TRACK OVERLAPS
FRONT OF RAILS
11 smithandnoble.com
ADJUSTMENT
SCREWS
ADJUSTMENT SCREWS
If the rail is
uneven at
the top, raise
the low side
with the outer
adjustment
screw.
ADJUSTMENT SCREWS
If the stack is
uneven at the
bottom, lower
the high side
with the inner
adjustment
screw.
STEP 8 — LEVELING THE SHADE
Level the Moving Rail
Motorized Skylight Shades use a
system that allows easy leveling of
the moving rail. It is designed to make
slight adjustments (Less than 1") to
level the moving rails of your shade.
It is not designed to make length
adjustments.
Use a at head screwdriver or a coin
(a quarter works the best) to turn the
adjustment screw to raise or lower that
side of the bottom rail. The adjustment
screw is on the top of the moving rail.
One quarter turn of the screw will
move the moving rail up or down
approximately 1⁄4".
Over-turning the adjustment screw
(more than 1" of adjustment) can cause
the cord to tangle or wedge inside
the rail. The screw should turn easily -
Do Not Force.
Operang & Programming Guide For
Rechargeable Motorized Shades
Smith & Noble
Smart Shades
Cellular Shades &
Cellular Skylight Shades
13 14
smithandnoble.com
800.248.8888
PAIRING THE REMOTE
For added protecon, your remote control
arrived with a protecve lm on top. Please
remove this lm prior to use.
Your shades will need to be paired to the
remote prior to operang your shade. See Pair
the Remote below.
Pair The Remote
This remote control has 14 channels. Before
pairing the remote, determine which shade(s)
you want on which channel. All shades paired to
a remote will also automacally be programmed
to the “ALL” channel.
It is recommended to only pair one shade per
channel unless it is absolutely necessary to
group shades other than the “ALL” channel. This
simplies adjusng limits and seng favorites.
If a baery is not already installed in the remote,
follow the instrucons REPLACE BATTERY IN
REMOTE.
The 14 Channel remote may also be used to
operate top down-bottom up Cellular shades.
You can not mix a standard bottom up only
shade and a TD/BU shade on the same channel.
1. Rotate the door over the controls up. The
REMOTE BACK
LIMIT
BUTTON
CONFIRM
BUTTON
PROTECTIVE
FILM
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL
RAIL SELECTOR
REMOTE FRONT
PAIRING THE REMOTE
OPERATING THE REMOTE
door located at the right end of the head
rail.
2. Make sure the On/O switch on the
motor is set to "ON".
3. Select the channel that you want to
pair the shades to, using the CHANNEL
selector buon. The buon will scroll
through channels in ascending order
only. The remote will go back to channel
1 aer channel 14 and all channel.
4. Conrm that the channel selected is
set for boom up only shades by looking
to see if a number 1, 2 or 3 shows in the
le of the display. If a number is shown,
deacvate the Top Down/Boom Up
funcon for that channel by pressing the
RAIL SELECTOR and DOWN buons
at the same me unl the rail selector
number disappears from the le side of
the screen.
Select the desired channel with the CHANNEL
buon.
Raise and Lower Shade
Press the UP or DOWN buons to raise or
lower the shade.
Tapping the UP or DOWN buons for less
than 2 seconds will move the shade in short
steps. Holding the UP or DOWN buons down
for more than 2 seconds before releasing will
operate the shade at the faster standard speed.
Press the STOP buon to stop the shade at the
desired posion.
5. Press the SETTING button on the motor
until the motor starts to beep. Release the
button immediately after the beeps start.
The motor will make 4 fast beeps followed
by 5 long beeps. Press the CONFIRM
button on the remote anytime during the
series of long beeps. It must be pressed
before the last long beep. The motor will
respond with 3 fast beeps confirming that
the shade has been paired.
6. Close the door over the controls.
7. Repeat steps 1-2 to pair remaining
shades to the rest of the channels.
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL
RAIL
SELECTOR
REMOTE FRONT
15 16
smithandnoble.com
800.248.8888
SETTING SHADE LIMITS
Adjust Shade Limits (If Desired)
The lower and upper limits have been set at
the factory. If you need to make adjustments
to the limits, follow the instrucons below.
Please Note: When clearing the factory set
limits, both the upper and lower limits will
need to be reset.
Use the CHANNEL buons to select the
channel for the shade that needs to be
adjusted. Then follow the direcons below.
When adjusng one shade, the other shades
on that channel need to be temporarily
unpaired from the remote (see UNPAIR THE
REMOTE).
Follow the SETTING LIMITS instrucons
and then re-pair shades by following the
steps to PAIR THE REMOTE.
If there is only a single shade on the channel,
proceed to SETTING LIMITS.
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL
RAIL
SELECTOR
REMOTE FRONT
SETTING SHADE LIMITS
Hold the LIMIT buon unl the shade jogs
& beeps.
Lower Limit
Use the DOWN buon to lower the
shade. Press stop when the shade is near
the desired lower limit.
WARNING: The motor will not stop unl
the STOP buon is pressed. If the shade
is not stopped, the motor will connue to
work past the operable limit and will cause
damage to the shade.
Use the UP and DOWN buons to adjust
the length more accurately.
Hold the CONFIRM buon unl the shade
jogs & beeps. This locks in the lower limit.
Upper Limit
Use the UP buon to raise the shade.
Press stop when the shade is near the
desired upper limit.
WARNING: The motor will not stop unl
the STOP buon is pressed. If the shade
is not stopped, the motor will connue to
work past the operable limit and will cause
damage to the shade.
Use the UP and DOWN buons to adjust
the upper limit more accurately.
Hold the CONFIRM buon unl the shade
jogs & beeps. This locks in the upper limit.
Note: If you also desire to set a favorite
posion you should do so prior to
repairing other shades on that channel.
See SETTING & USING A FAVORITE
POSITION.
REMOTE BACK
LIMIT
BUTTON
CONFIRM
BUTTON
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL
RAIL
SELECTOR
REMOTE FRONT
17 18
smithandnoble.com
800.248.8888
SETTING & USING A FAVORITE POSITION
If there is only a single shade on the channel
proceed to SETTING A FAVORITE POSITION
below.
If there is more than one shade on the channel,
all shades on that channel will need to be
unpaired (see UNPAIR THE REMOTE).
Follow the steps in PAIR THE REMOTE to pair
only the shade that needs a favorite posion
set. Then proceed to SETTING A FAVORITE
POSITION.
Use the UP or DOWN buons to posion
the shade at the desired “favorite” posion.
While holding the LIMIT buon, quickly press
and hold the UP buon. Release both buons
when the shade jogs & beeps.
When complete, re-pair previously unpaired
shades by following the steps to PAIR THE
REMOTE.
With the shade at either the upper or lower
limit, simply press the STOP/FAVORITE
buon to bring the shade to the “favorite”
posion. To go to the “favorite” posion from
any other locaon, make sure the shade has
been stopped for at least three seconds before
pressing the STOP/FAVORITE buon.
Use the UP or DOWN buons to posion
the shade at the desired “favorite” posion.
While holding the LIMIT buon, quickly press
and hold the UP buon. Release both buons
when the shade jogs & beeps.
To erase a “favorite” posion, bring the shade
to the upper limit. Press and hold the LIMIT
buon on the back of the remote, then press
and hold the UP buon. Release both buons
when the shade jogs & beeps.
When complete, repair previously unpaired
shades by following the steps to PAIR THE
REMOTE.
REMOTE BACK
LIMIT
BUTTON
CONFIRM
BUTTON
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL
RAIL
SELECTOR
REMOTE FRONT
UNPAIR THE REMOTE
DISABLING UNUSED CHANNELS
To unpair a shade(s) from a selected
channel, press and release the CONFIRM
buon on the back of the remote.
Connue to press & release unl the
shade jogs & beeps.
Please note: All shades assigned to the
selected channel will be unpaired during
this process.
The 14 channel remote has the opon
of turning o unused channels, making
channel selecon easier.
Press and hold both UP and DOWN
buons for 3 seconds unl 00 Channel
displays. Release the buons and the 00
will start to ash.
Press the UP or DOWN buon to
select the required number of channels
(between 1-14).
Press and hold the CHANNEL and RAIL
selector buons at the same me to
conrm selecon. The display will go
back to channel 01.
Follow the same process if you need to
re-add channels.
Note: 00 will only show the rst me
you disable unused channels. Aer that,
the display will ash with the number of
acve channels set to the remote.
REMOTE BACK
LIMIT
BUTTON
CONFIRM
BUTTON
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL
RAIL
SELECTOR
REMOTE FRONT
Inhaltsverzeichnis
Andere Smith & Noble Jalousie Handbücher
Smith & Noble
Smith & Noble Board Bedienungsanleitung
Smith & Noble
Smith & Noble Motivia Motorization Bedienungsanleitung
Smith & Noble
Smith & Noble Rod Bedienungsanleitung
Smith & Noble
Smith & Noble Rod Bedienungsanleitung
Smith & Noble
Smith & Noble Faux Wood Blinds Bedienungsanleitung
Smith & Noble
Smith & Noble Metal Blinds Bedienungsanleitung
Smith & Noble
Smith & Noble Sheer Elegance Bedienungsanleitung
Smith & Noble
Smith & Noble Cellular Shades Bedienungsanleitung
Smith & Noble
Smith & Noble Metal Blinds Bedienungsanleitung
