Snap-On BK7000 Bedienungsanleitung

BK7000

High Definition Videoscope

Operating Manual

General Safety Information

Read and understand all instrucons. Failure to follow all instrucons listed below may result in

electric shock, re and/or serious personal injury.

Work Area Safety

•Keep your work area clean and well lit. Cluered benches and dark areas may cause accidents.

•Do not operate electrical devices or video scope tool in explosive atmospheres, such as in the presence of ammable

liquids, gases, or heavy dust. Electrical devices or visual inspecon tools create sparks which may ignite the dust or

fumes.

•Do not use the video scope around corrosive chemicals.

•Keep bystanders, children, and visitors away while operang visual inspecon tool. Do not let visitors contact the unit.

Personal Safety

•Stay alert, watch what you are doing and use common sense. Do not use video scope while red or under

the inuence of drugs, alcohol, or medicaons. A moment of inaenon while operang tools may result

in serious personal injury.

•Do not overreach. Keep proper foong and balance at all mes. Proper foong and balance enables beer control of

the tool in unexpected situaons.

•Use safety equipment. Always wear eye protecon (users and bystanders). Dust mask, non-skid safety shoes, hard

hat, or hearing protecon must be used for appropriate condions.

•Use proper accessories. Do not place this product on any unstable cart or surface.

•The product may fall causing serious injury to a person or serious damage to the product. Prevent object and liquid

entry. Never spill liquid of any kind on the video display unit. Liquid increases the risk of electrical shock and

damage to the product.

•Do not use this device for personal or medical use/inspecon in any way.

•The unit is not shock-resistant. Do not use it as a hammer or drop it.

To reduce the risk of serious injury, read these precautions carefully before using the battery

chargeror battery.

A/C Power Supply

•Do not probe A/C power supply with conducve objects. Shorng of baery terminals may cause sparking, burning

or electrical shock.

•Do not use A/C power supply if damaged. A damaged A/C power supply increases the risk of electrical shock.

•Use an appropriate power source. Do not aempt to use a step-up transformer or an engine generator. Doing so

may cause damage to the A/C power supply of the BK7000 resulng in electrical shock, re or burns.

•Do not allow anything to cover the A/C power supply while in use. Proper venlaon is required for correct

operaon of the A/C power supply. Allow a minimum of 4” (10 cm) of clearance around the charger for proper

venlaon.

•Unplug the A/C power supply when not in use. Reduces the risk of injury to children and untrained persons.

•Unplug the A/C power supply from outlet before aempng any maintenance or cleaning. Reduces the risk of

electrical shock.

•Do not use A/C power supply in a damp, wet or explosive environment. Do not expose to rain, snow or dirt.

Contaminants and moisture increase the risk of electrical shock.

•Do not open the A/C power supply or BK7000 housings. Have repairs performed only at authorized locaons. (See

Snap-on Service Center).

•Do not carry the A/C power supply by power cord. Reduces the risk of electrical shock.

Battery Safety

•The baeries in the BK7000 are NOT user replaceable. Call your Service Center if you believe the BK7000 baery is in

need of service.

•Properly dispose of the BK7000. Exposure to high temperatures can cause the baery to explode, so do not dispose

of in a re. Some countries have regulaons concerning baery disposal. Please follow all applicable regulaons.

•Charge baery in temperatures above 32 degrees F (0 degrees C) and below 113 degrees F (45 degrees C). Store

BK7000 in temperatures above -4°F (-20°C) and below 140°F (60°C). Storage for a long me at temperatures above

95°F (35°C) will reduce the capacity of the BK7000. It is recommended to store the BK7000 at 77°F (25°C) to

maximize baery life. Proper care will prevent serious damage to the baery. Improper care of the baery may

result baery leakage, electrical shock and burns.

Battery Safety continued

•If the BK7000 is damaged, do not plug the A/C power supply into it. Do not aempt to charge.

•Never disassemble the BK7000 unit. There are no user-serviceable parts inside.

•Disassembling the BK7000 may cause electrical shock or personal injury.

Avoid contact with uids leaking from the BK7000 unit. Fluids may cause burns or skin irritaon. Thoroughly rinse with

water in case of accidental contact with uid. Consult doctor if uid comes into contact with eyes.

Video Scope Use and Care

•Use video scope only as directed. Do not operate the inspection unit unless the owner’s manual has been read and

proper training has been completed.

•Do not immerse the handheld display unit in water. Store in a dry place. Such measures reduce the risk of electric

shock and damage. The imager head and the cable are water resistant when the unit is fully assembled, but the video

display unit/handle is not.

•Do not use the camera if condensation forms inside the lens. Let the water evaporate before using again.

•Do not use tool if ON/OFF switch is not properly working. Any tool that cannot be controlled with the switch is

dangerous and must be repaired.

•Store idle equipment out of the reach of children and other untrained persons. Equipment is dangerous in the hands

of untrained users.

•Maintain the video scope with care. Properly maintained tools are less likely to cause injury.

•If unit is dropped, check for breakage of parts, and any other conditions that may affect the tool’s operation. If

damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

•Use only accessories that are recommended by the manufacturer for your tool. Accessories that may be suitable for

one tool may become hazardous when used on another tool.

•Dry your hands before turning the unit ON or OFF.

•Protect against excessive heat. The product should be situated away from heat sources such as radiators, heat

registers, stoves or other products (including amplifiers) that produce heat. Do not use the unit near moving

machinery or areas where the temperature will exceed 140°F (60°C).

Service

•Do not aempt to take any pieces of this unit apart unless directed to by this manual.

•Follow instrucons for changing accessories. Accidents are caused by poorly maintained equipment.

•Provide proper cleaning. Do not use acetone to clean the unit. Instead, use isopropanol.

•Gently clean the LCD with a dry cloth.

•Stop using the unit if it starts smoking or eming noxious fumes.

•Refer video scope to qualied service personnel if any of the following condions are met:

–If liquid has been spilled or objects have fallen into product;

–If product does not operate normally by following the operang instrucons;

–If the product has been dropped or damaged in any way

–When the product exhibits a noceable change in performance.

If you have any questions regarding the service or repair of this machine, call or write to the appropriate repair center location (see

"Snap-on Service Center Locations”).

Technical questions can be directed to our toll free number at (877) 762-7664 Monday through Friday 6:30 am to 5:00 pm Central Time

(U.S. customers only).

Andere Handbücher für BK7000

Inhaltsverzeichnis

Andere Snap-On Diagnosegeräte Handbücher

Snap-On

Snap-On VERDICT D7 Bedienungsanleitung

Snap-On

Snap-On Zeus Bedienungsanleitung

Snap-On

Snap-On Ethos-Tech Bedienungsanleitung

Snap-On

Snap-On TRITON-D10 Bedienungsanleitung

Snap-On

Snap-On BK7000 Bedienungsanleitung

Snap-On

Snap-On MT-2500 Bedienungsanleitung

Snap-On

Snap-On APOLLO D8 Bedienungsanleitung

Snap-On

Snap-On Zeus Bedienungsanleitung

Snap-On

Snap-On TPMS5 Bedienungsanleitung

Snap-On

Snap-On Ultra Bedienungsanleitung

Snap-On

Snap-On Triton D8 Bedienungsanleitung

Snap-On

Snap-On Zeus Bedienungsanleitung

Snap-On

Snap-On SOLUS Edge Bedienungsanleitung

Snap-On

Snap-On BK8500 Bedienungsanleitung

Snap-On

Snap-On PRO-LINK EDGE Gebrauchsanweisung

Snap-On

Snap-On ETHOS Edge Bedienungsanleitung

Snap-On

Snap-On EEMS328 Bedienungsanleitung

Snap-On

Snap-On SVTSRAD272A Bedienungsanleitung

Snap-On

Snap-On TPMS4 Bedienungsanleitung

Snap-On

Snap-On MODIS Edge Bedienungsanleitung

Snap-On

Snap-On TRITON-D10 Bedienungsanleitung

Snap-On

Snap-On Apollo-D9 Bedienungsanleitung

Snap-On

Snap-On Triton D8 Bedienungsanleitung

Snap-On

Snap-On MODIS Series Bedienungsanleitung

Beliebte Diagnosegeräte Handbücher anderer Marken

Mindray

Mindray M7Vet Kurzanleitung

TEXA

TEXA TMD2 Bedienungsanleitung

Autel

Autel MaxiIM IM608 Bedienungsanleitung

Sealey

Sealey BT2012 Bedienungsanleitung

Diagnoptics

Diagnoptics Age Reader Bedienungsanleitung

LAUNCH TECH

LAUNCH TECH X-431 PRO5 Bedienungsanleitung

Hella Gutmann

Hella Gutmann Mega macs X Bedienungsanleitung

Foxwell

Foxwell I80TS Bedienungsanleitung

KaVo

KaVo 3D eXam Bedienungsanleitung

ATEQ

ATEQ VT46 Bedienungsanleitung

Hella Gutmann

Hella Gutmann mega macs X Bedienungsanleitung

Autel

Autel MaxiFlash VCMI Bedienungsanleitung

Qiagen

Qiagen QIAcube Connect MDx Bedienungsanleitung

Alber

Alber BDSU Bedienungsanleitung

St. Jude Medical

St. Jude Medical QUANTIEN Bedienungsanleitung

Bosch

Bosch DCU 100 Bedienungsanleitung

Launch

Launch CNC-602A Bedienungsanleitung

FujiFilm

FujiFilm ED-580XT Bedienungsanleitung