Snapmaker 2.0 Bedienungsanleitung
DISTRIBUTOR
TECHNICAL SUPPORT V2.0
Troubleshooting Guide for
Snapmaker 2.0 3-in-1 3D Printers
CONTENTS
01 Hardware
02 Touchscreen
02 Touchscreen Shows "not responding"
03 Touchscreen Shows "Fabscreen has stopped"
03 Touchscreen Flashes
03 Touchscreen Is Black
04 Linear Module
04 Clunk Sound While the Y-axis Linear Modules are Moving
06 Linear Module Won’t Move Anymore
06 Linear Module Only Moves in One Direction
09 The Slider of Linear Module Comes Loose
12 Stainless Steel Strip of Linear Module Comes Loose
13 3D Printing
13 3D Printing Module Pushes into Print Sheet
17 3D Printing Module Isn't Detected
19 First Layer Doesn't Stick to Print Sheet
21 Touchscreen Keeps Showing Filament Runout
22 Filament Won't Load
25 Blobs of Filament on Nozzle
26 Touchscreen Shows a -30℃ or Abnormally High Nozzle Temp
27 Heated Bed Won't Heat up
28 Laser
28 Auto Focus Fails
31 Laser Module Emits Weak Laser
33 Stuck in “Processing” during Auto Focus
34 Camera Capture Doesn't Work
35 Laser Module Doesn't Emit Laser
38 Camera Sign Is Yellow on Touchscreen
40 Laser Won't Turn off
41 Rotary Module
41 Working with Cuboid Materials
41 Built-in Sample Models
42 Compatibility with Third-party Chucks
42 Using A350 Rotary Module on A250
43 Enclosure
43 Enclosure Isn't Detected or Recognized
45 Others
45 Power Module Doesn't Work
45 G-code File Wi-Fi Transfer Is Unsuccessful
46 Machine Can't Read the File of USB Flash Drive
49 None of the Toolheads Can Be Detected
50 Software
51 Luban Shows "The machine is not ready"
52 No Camera Capture Button in Luban
53 Luban Is Blank upon Launching
55 Appendix
56 Parts List
58 Specs Sheet
This is a troubleshooting guide that helps you locate where the problem is when you use the Snapmaker 2.0 3-in-1
Printer, and tells you what to do to solve it. It's divided into two chapters. The first chapter addresses hardware
problems, while the second addresses software problems.
If you have tried all the actions delineated in this guide and still aren't able to solve the problem, we are here to
help. Please contact support@snapmaker.com with a detailed description of the problem and a video of your
troubleshooting process, and send a carbon copy (cc.) to your sales representative( @snapmaker.
com)at Snapmaker. To ensure all the glossaries are consistent with each other, a parts list is included in
Appendix. You can also get more information about specifications in Appendix.
While we strive to provide correct information, Snapmaker doesn't in any way makes any warranty, express or
implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of the information
disclosed in this guide.
Snapmaker reserves the right to update this document without notice. In the meantime, you might also find the
following resources useful.
• For Quick Start Guides:https://snapmaker.com/product/snapmaker-2/downloads.
• For User Manuals: https://snapmaker.com/product/snapmaker-2/downloads.
• For the latest version of the firmware:
https://snapmaker.com/product/snapmaker-2/downloads.
https://forum.snapmaker.com/t/snapmaker-2-0-firmware-updates-and-downloads/5443/12.
• For the latest version of software:
https://snapmaker.com/product/snapmaker-2/downloads
https://luban.xyz/
https://github.com/Snapmaker/Luban/releases
https://forum.snapmaker.com/t/snapmaker-luban-downloads-and-updates/4949/21.
© 2021 Snapmaker. All Rights Reserved.
| 01
This chapter covers problems with the modules and
addons of the Snapmaker 2.0, which include the
Enclosure, the Touchscreen, the 3D Printing Module, the
Laser Module, the Rotary Module, and the Controller. For
problems regarding the Snapmaker Luban, go to the next
chapter.
Hardware
02 |
Hardware
Touchscreen
Touchscreen Shows "not responding"
The Touchscreen shows “the machine is not responding, would you like to reconnect”. This is likely to happen
pre- and mid-printing.
Possible Causes
• The Controller or the Power Module is malfunctioning.
• The Touchscreen cable is connected wrongly.
• The Touchscreen itself is malfunctioning.
Actions
1. Check if the status light at the back of the Controller is breathing regularly.
2. If it's not breathing, then the Controller or the Power Module is malfunctioning. Check if the voltage of the
Power Module is normal.
- Unplug the DC power cable from the Controller, and measure the voltage of the pins shown below.
• The voltage between Pin 4 and Pin 1 should be around 24V.
• The voltage between Pin 4 and Pin 3 should be around 3.3V.
If the voltage is normal, replace the Controller. If not, replace the Power Module.
Please contact us at support@snapmaker.com with the voltage results for replacement.
3. If it breathes as expected, launch Snapmaker Luban and connect your computer with the machine using the
USB cable. If Luban has no problem connecting with and controlling the machine, then the Controller is fine.
The cause might be on the Touchscreen cable and see step 4.
4. Unplug the Touchscreen cable from the Controller, flip the cable connector 180°, and plug it back in. If this
doesn't solve the problem, then the Touchscreen cable might be broken.
Please contact us at support@snapmaker.com for replacement.
| 03
Touchscreen Shows "Fabscreen has stopped"
Possible Causes
• The firmware is outdated.
• The G-code file is too large. This usually happens when you transfer the file from Snapmaker Luban to the
machine via Wi-Fi.
• The G-code file can't be parsed by the Touchscreen. This may happen if the G-code file is generated by
third-party software that Snapmaker isn't compatible with.
Actions
1. Download and install the latest version of the firmware.
2. Try a smaller G-code file.
3. Download the latest version of Snapmaker Luban, and try to generate the G-code file on Snapmaker Luban.
If the problem persists, please contact us at support@snapmaker.com for further assistance.
Touchscreen Flashes
The Touchscreen flashes as in this video.
Possible cause
• The Touchscreen might be malfunctioning.
Action
Replace the Touchscreen.
Please contact us at support@snapmaker.com for replacement.
Touchscreen Is Black
The Touchscreen is black and won't light up.
Possible Causes
• The Touchscreen itself is malfunctioning.
• The Controller is malfunctioning.
• The Power Module or DC power cable is malfunctioning.
Action
Please refer to this article.
04 |
Hardware
Linear Module
Clunk Sound While the Y-axis Linear Modules are Moving
The Y-axis Linear Modules make a clunk sound when moving back and forth.
Possible Cause
• The travel distances of the two Y-axis Linear Modules are not matched.
Actions
You can follow the steps below or refer to this video.
1.Turn off the machine.
2. Disassemble the Heated Bed and Support Platform from the two Y-axis Linear Modules.
3. Move the sliders to the front end of the Y-axis Linear Modules by hand.
4. Place a piece of the Laser Engraving and Cutting Platform next to the two sliders.
5. Make sure there is no gap between the sliders and the Laser Platform.
| 05
6. Turn on the machine. On the Touchscreen, control the Y-axis Linear Modules to the other end.
7. Check if there is a gap between the sliders and the Laser Platform.
8. Swap one of the Y-axis Linear Modules with the X-axis one. Then run the same test.
9. Choose those two that have the closest travel distance as the Y-axis Linear Modules.
If the problem persists, please contact us at support@snapmaker.com for further assistance.
Make sure the two sliders are flush
Make sure the two sliders are flush
06 |
Hardware
Linear Module Won’t Move Anymore
The Linear Module won’t move suddenly.
Possible Causes
• The Linear Module is malfunctioning.
• The Controller port is malfunctioning.
• The Converter is broken.
Actions
1. Turn off the machine, and then manually push the slider of the Linear Module back and forth.
2. If it takes more effort than other Linear Modules, then the Linear Module is malfunctioning.
3. If the slider can be moved smoothly, then the Controller port or the Converter might be the problem. Please
contact us at support@snapmaker.com for further assistance.
Linear Module Only Moves in One Direction
The Linear Module can only move in one direction.
Possible Cause
• The end-stop switch is stuck or broken.
Actions
1. Connect the machine to your computer with a USB cable.
2. Launch the Snapmaker Luban. Go to Workspace, input M119 in the Console panel, and then check the status
of the end-stop switch.
Andere Handbücher für 2.0
1
Inhaltsverzeichnis
Andere Snapmaker 3D-Drucker Handbücher
Snapmaker
Snapmaker Artisan Bedienungsanleitung
Snapmaker
Snapmaker J1 Bedienungsanleitung
Snapmaker
Snapmaker A350 Bedienungsanleitung
Snapmaker
Snapmaker A150 Bedienungsanleitung
Snapmaker
Snapmaker CAN Hub A150 Bedienungsanleitung
Snapmaker
Snapmaker A150 Bedienungsanleitung
Snapmaker
Snapmaker J1 Bedienungsanleitung
Snapmaker
Snapmaker J1 Bedienungsanleitung
Snapmaker
Snapmaker A250 Bedienungsanleitung
Snapmaker
Snapmaker A150 Bedienungsanleitung
Snapmaker
Snapmaker Dual Extrusion 3D Printing Module Bedienungsanleitung
Snapmaker
Snapmaker F350 Bedienungsanleitung
Snapmaker
Snapmaker J1s Bedienungsanleitung
Snapmaker
Snapmaker Snapmaker Bedienungsanleitung
Snapmaker
Snapmaker 2.0 Bedienungsanleitung
Snapmaker
Snapmaker Artisan Bedienungsanleitung
Snapmaker
Snapmaker Artisan Bedienungsanleitung
Snapmaker
Snapmaker Snapmaker Bedienungsanleitung
Snapmaker
Snapmaker A250 Bedienungsanleitung
Snapmaker
Snapmaker Ray Bedienungsanleitung
