Snapper 7600053 Bedienungsanleitung

#7600053 TWIN BAG CATCHER FRAME STIFFENER KIT FOR

SNAPPER / SIMPLICITY RZT & JAVELIN TWIN BAG CATCHERS

WARNING

DO NOT attempt any adjustments, maintenance, repairs, or service with engine running. Stop engine. Engage

parking brake. Remove key. Remove spark plug wire and secure wire away from spark plug. Engine, muffler and

surrounding areas are extremely hot. Avoid serious burns; allow components to cool down before installing kit.

Replace worn or damaged parts prior to operating. Use approved fuel container. DO NOT smoke near open fuel

container. DO NOT fill fuel tank indoors or when engine is running. Allow engine to cool for at least ten minutes

before refilling. Make sure that fuel cap is tightened securely. Wipe off any spilled fuel before starting engine.

STEP 1: Remove the debris containers from the catcher

frame. Refer to the twin bag catcher instructions.

STEP 2: Remove the upper discharge tube from the hole in

the right front of the cover assembly. Refer to the twin bag

catcher instructions.

STEP 3: Remove the bridge pin and clevis pin from the

hinge on the cover assembly, and remove the cover

assembly from the catcher frame. Refer to the twin bag

catcher instructions.

STEP 4: Remove the hardware securing the U-tube (A,

Figure 1) to the channel assembly (B). Do not remove the

center support tube (not shown) from the channel assembly.

STEP 5: Reinstall the U-tube with the supplied stiffener

bracket (E) onto the channel assembly, securing with three

of the supplied carriage bolts (C) and flange nuts (D). Do not

tighten the hardware yet.

(Continued Other Side)

FIGURE 1

INSTRUCTION No. 7101366 (I.R. 3/27/2007)

TP 200-5265-IR-AT-SN

The Twin Bag Catcher Frame Stiffener Kit is designed to provide extra support to the catcher frame.

(Components removed for clarity)

Contents

1733432 - Stiffener Bracket (1) 1931338 - 5/16 x 1-3/4 Carriage Bolt (5) 1960686 - 5/16-18 Flange Nut (6)

1720452 - Tube Saddle Clamp (2) 7091318 - 5/16 x 3/4 Hex Capscrew (1)

STEP 6: Install the supplied hex capscrew (H) through the

hole in both the stiffener bracket and the channel assembly,

securing with a flange nut (D). Tighten the hardware

installed in Steps 5-6.

STEP 7: Using the hole in either end of the stiffener

bracket as a template, drill two 11/32” thru holes (G) down

through the U-tube.

STEP 8: Install the two remaining supplied carriage bolts

bracket and U-tube. Install one saddle bracket (F) up onto

each bolt thread, and secure with a flange nut (D). Tighten

securely.

STEP 9: Reassemble the twin bag catcher components

removed in Steps 1-3. Refer to the twin bag catcher

instructions.

ASSEMBLY IS COMPLETE

INSTRUCTION No. 7101366 (I.R. 3/27/2007)

TP 200-5265-IR-AT-SN

Inhaltsverzeichnis

Andere Snapper Rasenmäherzubehör Handbücher

Snapper

Snapper 75438 Bedienungsanleitung

Snapper

Snapper 1695464 Bedienungsanleitung

Snapper

Snapper 6-3125 Bedienungs- und Wartungshandbuch

Snapper

Snapper 907 Bedienungsanleitung

Snapper

Snapper 1687262 Bedienungsanleitung

Snapper

Snapper 6-0941 Bedienungsanleitung

Snapper

Snapper 6-3317 Bedienungsanleitung

Snapper

Snapper 6-0431 Bedienungsanleitung

Snapper

Snapper 7600030 Installationsanleitung

Snapper

Snapper HYT18 Series Bedienungs- und Wartungshandbuch

Snapper

Snapper 1694946 Bedienungsanleitung

Snapper

Snapper 1600202 Bedienungsanleitung

Snapper

Snapper Simplicity RZT Riding Mowers Bedienungsanleitung

Snapper

Snapper 6-3172 Bedienungsanleitung

Snapper

Snapper 6-1410 Bedienungsanleitung

Snapper

Snapper 1690170 Bedienungsanleitung

Snapper

Snapper 61200 Bedienungsanleitung

Snapper

Snapper 6-3041 Bedienungsanleitung

Snapper

Snapper 1690257 Bedienungsanleitung

Snapper

Snapper 7600069 - 7600070 Bedienungs- und Wartungshandbuch

Snapper

Snapper 1600312 Bedienungsanleitung

Snapper

Snapper EC13V Bedienungsanleitung

Snapper

Snapper 1690047 Bedienungsanleitung

Snapper

Snapper 7600036 Bedienungsanleitung

Beliebte Rasenmäherzubehör Handbücher anderer Marken

Ariens

Ariens 891008 Bedienungsanleitung

Rover

Rover 108 - 109 Bedienungsanleitung

Toro

Toro 112-5803 Bedienungsanleitung

Scag Power Equipment

Scag Power Equipment GC-F4 Bedienungsanleitung

RHINO

RHINO 800 Bedienungsanleitung

Exmark

Exmark Quest 126-7506 Bedienungsanleitung

Cub Cadet

Cub Cadet 19B70029100 Bedienungsanleitung

Stihl

Stihl AMK 043.1 Bedienungsanleitung

MTD

MTD 753-0873 Handbuch

Toro

Toro 30810 Bedienungsanleitung

Bush Hog

Bush Hog RG60 Bedienungsanleitung

Land Pride

Land Pride RCF2760 Bedienungsanleitung

Simplicity

Simplicity 211 Bedienungsanleitung

Toro

Toro Z Master 116-0231 Bedienungsanleitung

Exmark

Exmark ULTRAVAC QUICK DUMP SYSTEM Bedienungsanleitung

Excel

Excel Two Bag Catcher Bedienungsanleitung

Textron

Textron Jacobsen Pro12 DFS Bedienungsanleitung

Toro

Toro 145-3495 Bedienungsanleitung