SNBC BTP-3200E Betriebsanleitung
Product Specification
Label Printer
BTP-3200E/3300E
Shandong New Beiyang Information Technology Co., Ltd.
BTP-3200E/3300E Product Specification
- 1 -
Declaration
This manual applies to BTP-3200E/3300E Label printer, and the information in this document is subject to
change without notice. SHANDONG NEW BEIYANG INFORMATION TECHNOLOGY CO., LTD.
(hereinafter referred to as “SNBC”) reserves the right to improve products as new technology, components,
software, and firmware become available. If users need further data about these products, please feel free
to contact SNBC or your local dealer.
No part of this document may be reproduced or transmitted in any form or by any means, electronic or
mechanical, for any purpose without the express written permission of SNBC.
Copyright
Copyright © 2013 by SNBC
Trademark
Registered trademark: .
SNBC has been approved by the following certifications:
ISO9001 Quality Control System Certification
ISO14001 Environmental Management System Certification
OHSAS18001 Occupational Health and Safety Management System Certification
IECQ QC 080000 Hazardous Substance Process Management System Certification
Contact us
ADD: No.169 huoju road, high-tech zone, Weihai, Shandong
Technical support: +86—631—5675118 8008601368
Fax: +86—631—5656098
PC: 264209
Website: www.newbeiyang.com.cn
BTP-3200E/3300E Product Specification
- 2 -
Contents
1 Overview ...................................................................................................................................................1
1.1 Product name, model, version ............................................................................................................1
1.2 Product function..................................................................................................................................2
2 Function introduction .................................................................................................................................3
3 Physical features .......................................................................................................................................4
3.1 Component structures ........................................................................................................................4
3.2 Appearance and color.........................................................................................................................4
3.3 Overall size and weight.......................................................................................................................4
3.4 Trademark and nameplate ..................................................................................................................5
3.5 Mounting mode ...................................................................................................................................5
4 Human-machine interface .........................................................................................................................6
4.1 Medium installation .............................................................................................................................6
4.1.1Installing paper roll ........................................................................................................................6
4.1.2 Installing the ribbon ......................................................................................................................7
4.2 Power switch, button and LED............................................................................................................9
4.2.1Power switch………………………………………………………………………………………………9
4.2.2LED function……………………………………………………………………………………………….9
4.2.3Button function…………………………………………………………………………………………….9
4.2.4Error LED…………………………………………………………………………………………………10
4.3 Self-test page....................................................................................................................................10
4.3.1Printer configuration information .................................................................................................10
4.3.2Print head test information ..........................................................................................................12
5 Product performance index .....................................................................................................................13
5.1 Print specifications............................................................................................................................13
5.2 Character specification .....................................................................................................................14
5.3 Barcode specification........................................................................................................................15
5.4 Image specification ...........................................................................................................................16
5.5 Tear-off/peel-off/paper cutting module...............................................................................................16
5.6 Status detection ................................................................................................................................16
5.7 Print area ..........................................................................................................................................17
5.8 Print and paper out position ..............................................................................................................17
5.9 Memory.............................................................................................................................................18
6 Media specification..................................................................................................................................19
6.1 Paper or paper roll ............................................................................................................................19
6.2 Label and (or) marked paper ............................................................................................................19
7 Communication interface.........................................................................................................................20
BTP-3200E/3300E Product Specification
- 3 -
7.1 Interface parameters.........................................................................................................................20
7.1.1 USB interface .............................................................................................................................20
7.1.2 9-pin serial interface...................................................................................................................20
7.1.3 Parallel interface ........................................................................................................................21
7.2 Communication cable .......................................................................................................................24
7.2.1 9-pin RS-232 interface communication cable.............................................................................24
7.2.2 IEEE1284 parallel interface communication cable .....................................................................24
7.2.3 USB interface communication cable...........................................................................................24
8 Power ......................................................................................................................................................25
8.1 Power supply requirements ..............................................................................................................25
8.2 Power adapter ..................................................................................................................................25
8.3 Power cord........................................................................................................................................25
9 Easy to use..............................................................................................................................................26
9.1 Easy operation..................................................................................................................................26
9.2 Easy maintenance ............................................................................................................................26
9.2.1 Error alarm type .........................................................................................................................26
9.2.2 Printer status when an error occurs............................................................................................26
9.2.3 Re-print after an error occurs .....................................................................................................26
9.2.4 Maintenance of key parts ...........................................................................................................26
9.3 System updating ...............................................................................................................................26
10 Printer reliability.....................................................................................................................................27
10.1 Printer .............................................................................................................................................27
10.2 Print head .......................................................................................................................................27
11 Standard compliance .............................................................................................................................28
11.1 Business and quality standards.......................................................................................................28
11.2 Certification .....................................................................................................................................28
12 Deliveries...............................................................................................................................................29
12.1 Complete documents......................................................................................................................29
12.2 Package..........................................................................................................................................29
13 Storage and usage ................................................................................................................................30
13.1 Transportation characteristics .........................................................................................................30
13.2 Storage ...........................................................................................................................................31
13.3 Requirements in use .......................................................................................................................31
14 Routine maintenance ............................................................................................................................32
BTP-3200E/3300E Product Specification
- 1 -
1 Overview
1.1 Product name, model, version
Product name: 104mm thermal/thermal transfer printing label printer
Model:
BTP – 3200E X X X X X X X X
a b c d e f g h
BTP – 3300E X X X X X X X X
a b c d e f g h
Model description:
a: Paper out mode
Default: tear-off mode (standard configuration)
P: Peel-off/paper existence sensor module
C: Paper cutting/cutter module
b: Expanded FLASH
Default: None (standard configuration)
F2: 2MB FLASH
F4: 4MB FLASH
F8: 8MB FLASH
c: Interface
Default: USB interface+9-hole RS-232C
P: USB interface+36-pin byte parallel interface
E: USB interface+JK-E02 wired Ethernet interface
W: USB interface + wireless Ethernet interface
d: Character set
Default: Simplified Chinese, for domestic use
C: Traditional Chinese
E: English
Tu: Turkish
H: Hebrew
F: Farsi
e: Command set
Default: BPLA
B: BPLB
Z: BPLZ
f: Color
Default: Gray (standard configuration)
g: Resolution
Default: 203DPI (standard configuration)
3: 300DPI
BTP-3200E/3300E Product Specification
- 2 -
h: LCD
N: No LCD (standard configuration)
Y: LCD
Example: BTP-3200E F4PY
Take BTP-3200E barcode printer for example. Paper out mode: tear-off; 4MB expanded FLASH;
Communication interface: USB interface and parallel interface; Programming language: BPLA,
Resolution: 203DPI, LCD.
1.2 Product function
BTP-3200E label printer is an ideal label and barcode printing device for office use, with delicate
appearance and excellent performance. It can apply to many fields, such as real-time label printing,
product label batch printing, transportation and logistics label printing, medical label printing and
business label printing.
BTP-3200E label printer can be connected with external devices via serial or other interfaces. It can
provide common drivers for the operation systems such as Windows 2000/Windows XP/vista/Windows
7/Windows server 2008/Windows server2003 and the software developing kit based on DLL.
BTP-3200E/3300E Product Specification
- 3 -
2 Function introduction
1) Printing
¾High speed printing
203DPI model: 150mm/s (Max); low-noise, high-reliability thermal/thermal transfer printing;
¾Support continuous paper, label paper, marked paper and other types of paper;
¾Adopt thermal history and temperature self-adapting control, high print quality.
2) Optional configuration
¾Peel off / existence sensor module;
¾Cutter module;
¾LCD module;
¾Expanded FLASH memory card.
3) Application software
¾Character printing: The printer is equipped with abundant internal character library. The
expanded character library can be downloaded to expanded FLASH and main board
SDRAM for user to call; Characters can be enlarged 1-8 times in vertical and horizontal
direction, rotation print (0°, 90°, 180°, 270°), support mirror image and vertical typesetting
print;
¾Barcode printing: Support 20 kinds of 1D barcodes and 4 kinds of 2D barcodes printing;
¾Bitmap printing: Image files such as binary format, PCX, BMP, IMG, HEX can be downloaded
to expanded FLASH and main board SDRAM for user to call.
4) Printer maintenance
¾Replace paper roll easily;
¾Clean and disassemble print head and platen roller easily;
¾Position of reflective and transmissive sensor can be adjusted, support various types of
paper detection;
¾Firmware online updating.
BTP-3200E/3300E Product Specification
- 4 -
3 Physical features
3.1 Component structures
Component parts: housing, print mechanism, control board module, communication cable;
Function units: print part, paper holder, ribbon release and rewind module, and button module.
3.2 Appearance and color
¾This product is a desktop barcode printer, which basically belongs to office product. Its whole
appearance adopts streamline design, with the design new and fashionable;
¾The appearance color of the printer is mainly black and gray, supplemented by blue, and the
LOGO silk-screen of the product is printed on the front board of the printer;
¾The printer is configured with a transparent window, which not only adds aesthetic feeling of the
whole printer, but also makes it convenient for user to observe the status of paper roll;
¾The optional LCD configuration adopts the design of turning in several angles, which is
convenient for the user to use and also improves the technological feeling of printer.
3.3 Overall size and weight
1) For overall size, please refer to the following figure (unit: mm):
2) Weight: about 3.45Kg (excluding paper roll and ribbon)
BTP-3200E/3300E Product Specification
- 5 -
3.4 Trademark and nameplate
1) Product nameplate
2) Product trademark
3) Warning symbol
3.5 Mounting mode
Place the printer flat on the operation table, which must be waterproof, dampproof and dustproof.
Figure 3.5
Caution:
The incline angle should not exceed ±15°and only the paper feed direction is allowed. The incline
in other directions is not allowed;
Keep the printer far away from water source, electrical equipments with big power consumption
and heat resources;
Do not place the printer in the place exposed to vibration and impact;
Keep the printer safely grounded;
It is recommended to keep at least the space as shown in figure 3.5-1, in order to guarantee the
reliability and operational convenience of the printer.
BTP-3200E/3300E Product Specification
- 6 -
4 Human-machine interface
4.1 Medium installation
4.1.1 Installing paper roll
1) Press the cover open spanner with both hands and turn the top cover upwards to open it (see
figure 4.1.1);
Figure 4.1.1
2) Insert the caps of two paper holders into the central holes of left and right paper guides along the
guiding slot.
Caution:
There are two kinds of paper roll with ID 12.7mm (1/2 inch) and 25.4mm (1 inch). When the paper roll
ID is different, the method to insert the cap of paper holder is also different. For detailed operation
method, please refer to the following figure (see figure 4.1.2):
Figure 4.1.2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere SNBC Etikettendrucker Handbücher
