SnoMaster SM-26 Montageanleitung
SM-26 (BLACK) ICE-MAKER
USER MANUAL
AND PRODUCT
SPECIFICATIONS
CONTENTS
Before Using Your Appliance
Critical Safety Information For Your Safety
IMPORTANT SAFETY INFORMATION 02
05
10
11
INSTALLATION INSTRUCTIONS
Accessories Included
Structure
Operation Procedure
Control Panel
MAINTENANCE
Cleaning the Interior
Cleaning the Exterior
ENERGY SAVING TIPS
04
PRODUCT FEATURES
01
Warranty Registration
Service and Support
WARRANTY, SERVICE AND SUPPORT
12
TROUBLESHOOTING
THAN YOU FOR PURCHASING THE SM-26
(BLACK), 26KG PLUMBED-IN ICE-MAKER
This product is warranted for 5 years on the compressor, 3 years
on the unit and 1 year on all parts not listed from the date of
purchase. Warranty does not cover products that have not been
used in accordance with the user guide or are outside the warranty
terms and conditions, which can be found at the following url:
https://snomaster.co.za/warranty/
WARRANTY, SERVICE AND SUPPORT
WARRANTY REGISTRATION
Register your SnoMaster SM-26
(BLACK), 26Kg Plumbed-In
Ice-Maker now for warranty, and
allow us to provide you with the
best possible after sales service:
• Please log onto our website at
www.snomaster.co.za
• Click on the ‘Warranty’ tab.
• Enter warranty information and
upload proof of purchase at the
bottom of the page.
SERVICE AND SUPPORT
Should an instance arise where
you require assistance, contact
our service team:
• Please log onto our website at
www.snomaster.co.za
• Click on the ‘Support’ tab.
• Click ‘Find a Repair Agent Near You’
and enter your region.
• Alternatively contact us via email:
info@snomaster.co.za or contact
us on +27 11 392 5315.
ON THE UNIT
WARRANTY
ON COMPRESSOR
WARRANTY
01
This manual contains important information including safety,
installation, maintenance and warranty instructions of the
SnoMaster SM-26 (BLACK), 26Kg Plumbed-In Ice-Maker. Please
read this manual carefully before use and follow all safety
information and instructions. It is recommended to keep this
manual for easy reference so that you are familiar with the
operation and maintenance of your appliance.
CRITICAL SAFETY INFORMATION FOR YOUR SAFETY
Before using this appliance, ensure it is correctly positioned and
installed as outlined in this manual. Follow these basic precautions
to prevent the risk of fire, electrical shock, or injury:
• This appliance is designed for domestic indoor use only and is
exclusively intended for making ice.
• Ensure that the incline angle of the appliance is not more than 45°
during transportation or operation.
• Before using your appliance for the first time, you should wait about
12 hours after positioning it in a place.
• Ensure sucient personnel are available to move and install the
appliance to prevent damage or injuries.
• Installation of this appliance by a certified plumber is recommended.
• The appliance needs to be levelled for optimal operation. You can
adjust the appliance feet to level it +/- 10mm.
• For optimal drainage, ensure that the drain outlet is positioned at
least 100 millimeters below the ice maker's drainage tube outlet.
This arrangement facilitates ecient water outflow by
utilizing gravitational force.
• Ensure the plug is easily accessible after positioning the appliance.
• Avoid connecting or disconnecting the electric plug with wet hands.
• To disconnect the appliance, grip the plug and pull it from the wall
outlet. Never pull out the plug by the cord.
• It is advisable to use a dedicated power source and avoid using
extension cords.
IMPORTANT SAFETY INFORMATION
SM-26 (BLACK), 26KG PLUMBED-IN ICE-MAKER
02
• Please unplug the appliance or disconnect the power before
performing any cleaning, maintenance, or servicing.
• If the appliance power supply cord is damaged, it must be replaced by
SnoMaster, its approved agent, or a similarly qualified person to
prevent any hazard.
• It is recommended that the circuit breaker size should be no
more than 20 amps.
• This appliance operates on a single-phase voltage of 230V/50Hz, to
avoid electrical surges, it is advised to use a surge protector plug.
• Cleaning and maintenance should be supervised by adults, especially
if children are involved.
• The appliance should be placed on a flat surface and should be
completely unobstructed. Ensure to leave 150mm space around
the appliance to ensure proper ventilation for the appliance. Place the
appliance away from direct sunlight and heat sources (stove, heater,
radiator, etc.).
• Unless specifically recommended in this manual, do not attempt to
repair or replace any part of the appliance. All other servicing should
be referred to a qualified technician.
• Never clean appliance parts with flammable fluids as they may create
a fire hazard or explosion. Also, avoid storing or using petroleum or
other flammable vapours and liquids near this appliance.
• Avoid solvent-based cleaning detergents or abrasives on the interior
or exterior as they may damage or discolour it.
• Ensure all packaging materials, stickers and films are removed from
the product. Clean the appliance’s surfaces with a mild detergent and
a damp cloth before initial use.
• Before connecting the appliance to a dedicated power source, let it
stand upright for approximately 12 hours. This measure helps
minimise the risk of cooling-system malfunctions that might occur
due to handling during incorrect transportation.
• Ensure all electrical connections are clean and dry before switching
on the appliance.
• Ensure all parts are correctly assembled before operation.
03
BEFORE USING YOUR APPLIANCE
• Dimensions (mm) Unit: (H) 655 (W) 425 (D) 540
• Storage Volume: 6Kg
• Net Weight: 33Kg
• Ice Making Capacity: 26Kg/24h
• Voltage: 230V/50Hz
• Total Input Power: 300W
• Dimensions (mm) Packaged: (H) 695 (W) 485 (D) 585
• Rated Current: 1.1A
• Suggested Applications: Small Oce, Apartment, Kitchen,
B&B, Home Bar, Café , Cocktail Bar
• Design Criteria: Engineered for the African Climate
16 CUBES PER CYCLE | ICE TYPE: BULLET ICE | BULLET ICE SIZE
(MM): (H) 36 (D) 26 | “ICE FULL” SENSOR | REFRIGERANT: R600A
PRODUCT FEATURES
SPECIFICATIONS:
04
Please observe the following instructions:
• Always ensure the appliance is out of reach of
children. Before disposing of it, damage the body
to prevent children from climbing inside,
ensuring their safety.
• Follow the instructions of your local regulations
when disposing.
WHEN DISPOSING THE APPLIANCE
This appliance contains R600a refrigerant, which is
FLAMMABLE and may cause a fire or an explosion.
WATER INLET ~ WATER FILLING ~ ICE MAKING
~ WATER RELEASING ~ ICE DROPPING
All these processes are automatically controlled for
continuous ice-making.
Should the water supply deplete or the ice storage bin reach
capacity, the operational panel's indicator light will activate, and
the ice-maker will cease operation automatically. The insulated
design of the ice storage bin serves to maintain the ice in a solid
state for an extended period.
• Water treated with reverse osmosis purification often gives a false
water indicator, it is advised to fit an inline mineral filter for the
sensors to detect the water.
• Ice cycle time is dependent on water temperature. Clean and drain
the appliance at least one or twice a month. Lemon juice or 10ml
vinegar can be added to the water to help the cleaning process.
• To prevent lime build-up it is advised to clean the appliance with a
descaling liquid once a month, dependent on the water quality in
your area.
INSTALLATION INSTRUCTIONS
Before installing your new appliance, please read all safety
instructions in this manual and follow the installation
instructions below:
WATER
05
06
Please Check If All The Accessories Shown Below Are Included:
1 x ICE SCOOP 1 X FILTER HOUSING
BRACKET
1 x ICE BIN PROTECTOR
1 x FILTER CARTRIDGE
HOUSING
1 x FILTER CARTRIDGE
ACCESSORIES INCLUDED
1 x LONG WATER INLET
Water Inlet to Filter Housing
Water Inlet To Tap
Water Outlet From Filter Housing
Water Inlet To Ice-Maker Inlet Valve
1 x SHORT WATER INLET
2 x O RINGS TO
SEAL THE WATER
INLET/ OUTLET
PIPES
1 x DRAIN OUTLET PIPE
2 x WATER INLET /
OUTLET FITTINGS
4 x SCREWS FOR
FILTER CASING
BRACKET
1Power Switch
2 Display Panel
3 Front Panel
4Door
5Ice Grid
6Ice Storage Bin
7Ice Full Sensor
8Power Cord
9Water Inlet Valve
10 Drainage Outlet
11 Leveling Feet
2Water Filter Inlet Pipe
1Tap
3Water Filter
4Water Filter Outlet Pipe
5Water Inlet Valve
6Drain Outlet
(Drain Outlet Must Be 100mm
Lower Than The Appliance)
INSTALL THE WATER INLET
SYSTEM AS FOLLOWS:
07
STRUCTURE
1
23
4
5
6
8
9
11
10
7
3
2
4
5
6
1
*Arrows Indicate Direction Of Water Flow
Inhaltsverzeichnis
Andere SnoMaster Eiswürfelbereiter Handbücher
