Snooper S7000 Bedienungsanleitung

1 • UK

Quick Start Guide

Kurzanleitung

Résumé du mode d’emploi

Verkorte Handleiding

Guía de inicio rápido

S7000

2 • UK

3 • UK

QUICK START GUIDE • UK

CONTENTS

Page 4 Start Up

Installing the SD Card

Page 5 Charging the Internal Battery

Page 6 Powering Ventura using the Built-in Battery

Page 7 Installing Ventura using the Windscreen

Suction Cup bracket

Page 8 Operating Instructions

Starting Up

Easy Set Up

Screen Settings

Page 10 Volume Control

Setting up Ventura

Page 12 Quick Start Guide to Navigation

Page 14 Quick Menu

Page 15 Using ACSI campsite search

Using the Multi-route function

Page 18 TMC (Traﬃc Message Channel)

Page 20 System Security Code

Page 21 System Requirements and Software Installation

Page 22 Downloading the AURATM Camera Database

Page 24 Accessories & Price List

Page 25 Vehicle Speciﬁc Professional Mounting Brackets

2 • UK

3 • UK

Restrictions

Height

Width

Length

Weight

No trailers

Warning

Steep road up ahead

Steep road down ahead

Tight bend ahead

Side winds

QUICK START GUIDE

Ventura has been designed to route your vehicle safely and legally, avoiding hazards

and legal restrictions such as low bridges and roads that are unsuitable for use by

larger vehicles. Ventura will create safe routes for you based on the attributes of your

vehicle and will alert you to any hazards if you should accidentally turn oﬀ that route for

any reason. However Ventura will also alert you to hazards if it is used without a route

programmed to ensure your chosen route is a safe one.

These are the hazards and restrictions Ventura will route you around and give you

advanced warning of:

4 • UK

5 • UK

To utilise the AURA™ Camera database you will need to register your Ventura and

perform a download. Please refer to‘System Requirements and Software Installation’

later in this Guide for further information.

Start Up

1. Installing the SD Card

Before using Ventura, you will need to install the SD Card included with the device. The

SD Card comes complete with a digital map of Western Europe and is also where the

AURATM camera database is stored if you choose to subscribe and download it.

Start by moving the ‘Batt. ON/OFF’ switch located on the back of the unit to the‘ON’

position, then remove the SD card from its packaging and insert it into the SD Card slot

as indicated. Switch on the device by pressing and holding the standby power button

located on the left hand side of the unit for 2 seconds. Press the‘Navi’icon from the menu

options. As soon as the ‘Navi’ icon is pressed, Ventura will automatically synchronise with

the SD Card. Once the synchronisation is completed, the SD Card will not function with

any other device. Your Ventura is now ready to navigate and the camera database can be

downloaded if necessary.

Please note that if the unit does

not activate when you press and

hold the standby power button for

2 seconds it may require charging.

Refer to the section‘Charging the

internal battery’ later in this guide.

SD Card

4 • UK

5 • UK

2. Charging the internal battery

Although Ventura can be charged using the

cigarette lighter in your vehicle, a complete

charge is more easily achieved by using the

240V AC mains charger included. When new,

the battery in your Ventura is approximately

20% charged.

To charge the unit fully, move the‘Batt. ON/

OFF’switch to the‘ON’position and connect

the 240V AC mains charger as indicated in

the picture on the right. The battery light

on the Ventura will illuminate and will take

approximately 3 hours to charge. When the

internal battery is fully charged, the red LED

will switch OFF. Once fully charged the battery

will last approximately 3 hrs during normal

use.

Note: The new battery’s full performance is

only achieved after two or three complete

charges and discharges.

CAUTION

THERE IS A RISK OF EXPLOSION IF THE BATTERY IS REPLACED WITH AN

UNAPPROVED TYPE. USING THE WRONG TYPE OF BATTERY MAY DAMAGE

YOUR UNIT AND INVALIDATE YOUR WARRANTY. ONLY SNOOPER AUTHORISED

PERSONNEL SHOULD REPLACE THE BATTERY. PLEASE DISPOSE OF USED BATTERIES

ACCORDING TO LOCAL WASTE MANAGEMENT RULES AND REGULATIONS.

FURTHER INFORMATION CAN BE FOUND IN THE USER MANUAL.

Plug the charger into a

240V AC mains socket

Plug the

charger cable into

the socket on the

back of the Ventura

6 • UK

7 • UK

3. Powering Ventura using the built-in battery

Once Ventura is fully charged, it is ready for use. Move the ‘Batt. ON/OFF’switch to the‘ON’

position and press and hold the standby/power switch on the left hand side of the unit

for 2 seconds to switch on the device.

WARNING

PLEASE DO NOT USE OR LEAVE THE VENTURA IN EITHER WET OR HUMID

CONDITIONS, OR IN EXTREME TEMPERATURES, AS THIS COULD PERMANENTLY

DAMAGE THE UNIT AND THE BATTERY. WHEN NOT IN USE DO NOT LEAVE THE UNIT

ATTACHED TO THE WINDSCREEN, ESPECIALLY WHEN THE WEATHER IS WARM, TO

AVOID DAMAGE TO THE UNIT AND ALSO REDUCE THE RISK OF THEFT

WARNING

THE DEVICE MAY RESTART IF EXPOSED TO STATIC ELECTRICITY, PLEASE AVOID

TOUCHING THE USB SOCKET ON THE SIDE OF THE UNIT.

ON/OFF

switch

6 • UK

7 • UK

4. Installing Ventura using the Windscreen Suction Cup bracket

You can mount your Ventura to the inside of your vehicles windscreen using the

windscreen bracket provided.

Clean the area where you wish to position



the bracket thoroughly with a good quality

glass cleaner. This allows a more secure seal

on the windscreen.

Place the suction cup and bracket on



the windscreen and push the locking

lever towards the windscreen to secure

the bracket.

Adjust the angle of the bracket so that



when the unit is attached to it you can

view the display and operate the controls

safely.

Position Ventura onto the bracket, by



inserting the bottom of the S7000 ﬁrst

and ﬁnally clipping the top of the bracket

into the slot on the back of the unit.

To remove Ventura simply unclip the unit,

by pushing the top of the bracket and taking

the unit from the holder.

Ventura can be powered directly either



from the internal battery if it is fully

charged or powered from the cigarette

lighter socket. To use the cigarette lighter

socket, plug the smaller plug on one

end of the power cable into the power

socket on the side of Ventura and plug

the larger plug into the cigarette

lighter socket of your vehicle.

Please Note: Only use the cigarette lighter power cable provided with Ventura.

Ventura operates on 9V and using any other cigarette lighter power cable will

damage your device and void the warranty.

Locking

lever

8 • UK

9 • UK

Operating Instructions

1. Starting Up

Once you have synchronised the SD Card it is time to perform the ﬁrst Start Up.

First make sure your vehicle is parked in as open a space as possible, clear of tall



trees and buildings so that the built in GPS antenna has a clear view of the sky above.

Next, switch the unit on by moving the‘Batt. ON/OFF’switch located on the back



of the unit to the‘ON’position, then press and hold the standby power switch on the

left hand side of the unit for 2 seconds.

Press the‘Navi’icon on the menu screen. Whilst the Ventura software is loading, a start-



up display will be shown for just a few seconds and then an ‘Information Screen’will be

displayed. Press the‘I Agree’button and the screen will display a section of a map.

Ventura needs to acquire a minimum of four satellites in order to work. Once this has



been achieved Ventura will ascertain your position and this will be indicated by a green

arrow icon on the on-screen map and the GPS signal strength will be shown to the

bottom right hand corner of the display. Your Ventura is now ready to navigate.

As the GPS engine and antenna have never been used before, the ﬁrst ‘Cold’ start

could take anywhere from 15 – 30 minutes to establish a satellite connection. Once

initialised, subsequent start ups will take less time and eventually should take only

a matter of minutes.

2. Easy Set Up

Screen settings - There are a number of map views or diﬀerent types of information that

can be displayed on the screen at any one time:-

3D 2D North

8 • UK

9 • UK

To modify the information shown access the Menu by simply touching Ventura in the

centre of the screen with your ﬁnger and then press the‘Conﬁgure’button.

Next press the icon where you will see the list of options

89 MILES

0:33LEFT 20:33PM

NW HOLLOWAY ROAD

Current time or vehicle speed

Direction and name of road

Estimated journey time or Estimated time of arrival

Distance to destination

GPS Signal strength Battery status

10 • UK

11 • UK

To change a setting press it with your ﬁnger and a list of the options available will be

shown next to a tick box. Simply press the tick box to indicate which option you would

like to choose.

Press‘OK’at the bottom of the screen. Your chosen settings will now be saved and will

appear on the screen each time you use your Ventura. If you want to switch between

your Current Speed and the Atomic Clock or the Estimated Time of Arrival and the Time

to Destination during your journey simply touch the LCD screen where either piece of

information is displayed and the unit will display the alternative setting and vice versa.

However, each time you switch on the device the original setting will be displayed.

Volume Control - The volume can be adjusted within the‘Conﬁgure’ Menu. To set this

function touch the screen in the centre with your ﬁnger and then press the ‘Conﬁgure’

button. The screen will then display a number of diﬀerent icons.

Press the icon. Press either the‘+’button to increase the volume or the‘–’button to

decrease the volume. Finally select the ‘OK’button to conﬁrm the setting.

Note: The arrow icon in the bottom right hand

corner of the display will return you to the

‘Conﬁgure’menu if pressed but will not store

any changes you have made. You need to select

the‘OK’button in order to save your changes.

Andere Handbücher für S7000

Inhaltsverzeichnis

Sprachen:

Andere Snooper Auto-Navigationssystem Handbücher

Snooper

Snooper Syrius Pro Bedienungsanleitung

Snooper

Snooper S1000 Bedienungsanleitung

Snooper

Snooper S1000 Bedienungsanleitung

Snooper

Snooper S5000 Bedienungsanleitung

Snooper

Snooper 2 Series Bedienungsanleitung

Snooper

Snooper 6 Series Bedienungsanleitung

Snooper

Snooper truckmate s7000 Bedienungsanleitung

Snooper

Snooper S81 Series Bedienungsanleitung

Snooper

Snooper S1000 Bedienungsanleitung

Snooper

Snooper 6 Series Bedienungsanleitung

Snooper

Snooper S7000 Bedienungsanleitung

Snooper

Snooper MY-SPEED XL G2 Bedienungsanleitung

Snooper

Snooper Truckmate Pro S6800 Bedienungsanleitung

Snooper

Snooper syrius s600 plus Bedienungsanleitung

Snooper

Snooper Syrius Bedienungsanleitung

Snooper

Snooper Syrius Pro Bedienungsanleitung

Snooper

Snooper 8100 SERIES Bedienungsanleitung

Snooper

Snooper AVN S7000 Bedienungsanleitung

Snooper

Snooper Syrius Truckmate S2000 Bedienungsanleitung

Snooper

Snooper S7000 Bedienungsanleitung

Snooper

Snooper TRUCKMATE LITE S6000 Bedienungsanleitung

Snooper

Snooper S8000 Bedienungsanleitung

Beliebte Auto-Navigationssystem Handbücher anderer Marken

Clarion

Clarion Navigation In-Car Entertainment Bedienungsanleitung

Rosen

Rosen DP-1001 Bedienungsanleitung

Alpine

Alpine INE-W970HD Bedienungsanleitung

Blaupunkt

Blaupunkt TravelPilot DX-N Bedienungsanleitung

Pioneer

Pioneer MZ360500EX Bedienungsanleitung

Sanyo

Sanyo NVM-4030 - Easy Street - Automotive GPS... Bedienungsanleitung

AvMap

AvMap Geosat 2C Bedienungsanleitung

Eonon

Eonon GE01B Bedienungsanleitung

Pioneer

Pioneer AVIC-Z920DAB Bedienungsanleitung

Nextar

Nextar M3-MX - Automotive GPS Receiver Bedienungsanleitung

Furrion

Furrion NV2200 Bedienungsanleitung

Mio

Mio MOOV 200-Series Bedienungsanleitung

Prestigio

Prestigio GeoVision 5150 Bedienungsanleitung

Magellan

Magellan Maestro 4210 - Automotive GPS Receiver Konfigurationshandbuch

Garmin

Garmin StreetPilot c510 Bedienungsanleitung

Garmin

Garmin nüvi 2200 Bedienungsanleitung

Garmin

Garmin 2610/2650 Bedienungsanleitung

Mazda

Mazda 107006AN Bedienungsanleitung