Snooper DVR-4HD Bedienungsanleitung
EN • 1
User manual
Vehicle Drive Recorder
with Speed Camera Detection
DV R- 4HD
EN • 2
Contents
About this Guide 4
FCC Statement
Prohibition of co-location
Important note
WEEE Notice
CE Regulatory Notice
Battery warning 5
Notes on Installation
Caution
1 Introduction 6
1.1 Features
1.2 Package Contents
1.3 Product Overview 7
2 Getting Started 8
2.1 Inserting the Memory Card
2.2 Installing in Vehicles
2.2.1 Mount to Windshield
2.2.2 Adjust the device position 9
2.3 Connecting to Power 10
2.4 LED Indicator 11
2.5 Powering the Device On / Off
2.5.1 Auto Power On/Off
2.5.2 Manual Power On/Off and Reset
2.5.2.1 Manual Power On
2.5.2.2 Power Off
2.5.2.3 Reset the device
2.6 Initial Settings 12
2.6.1 Set Automatic Record
2.6.2 Set the Date / Time
2.7 Application 13
2.7.1 Application installation
2.7.2 Wi-Fi connecting
3 Using the DVR-4HD 14
3.1 Recording Videos
3.1.1 Record videos while driving 15
3.1.2 Emergency Recording
3.1.3 The Recording Screen 16
3.1.4 Add speed point 17
3.1.5 Taking Snapshot
3.1.6 Display Speed Cameras
3.2 Driving Safety 18
3.2.1 LDWS (Lane Departure
Warning Systems)
3.2.2 FCWS (Forward Collision
Warning System) 20
3.2.3 Front Vehicle Go 21
3.2.4 Headlight Warning 22
3.2.5 Speed Cam Alert 23
3.2.6 Speed Limit Alert 24
3.2.7 Driver Fatigue Alert 25
3.2.8 Motion Detection
3.2.9 Collision Detection 26
3.2.10 ACC/DEC Alert 27
3.3 Playing Videos and
Viewing Pictures 28
3.3.1 Playing Videos and
Emergency Recording
3.3.2 Viewing Pictures
3.3.3 The Playback Screen 29
3.3.4 Deleting Files 30
4 Adjusting the Settings 31
4.1 Using the Menu
4.2 Menu Items 32
5 Installing the Software 35
6 Snooper DVR 36
7 Specifications 37
8 Updating speed trap data 38
PAGE PAG E
EN • 3
About this Guide
The content in this document is for information purpose and is subject to change without prior notice. We made every effort
to ensure that this User Guide is accurate and complete.
However, no liability is assumed for any errors and omissions that may have occurred.
The manufacturer reserves the right to change the technical specifications without prior notice.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
Contains FCC ID: 2ACFIWM7911B
Prohibition of co-location
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
Important note
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body. To maintain
compliance with FCC exposure compliance requirements, please follow the operating instructions as documented in this
manual.
WEEE Notice
Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in private households in the European
Union
This symbol on the product or on the packaging indicates that this cannot be disposed of as a household
waste. You must dispose of your waste equipment and/or battery by handling it over to the applicable
take-back scheme for the recycling of electrical and electronic equipment and/or battery. For more
information about recycling of this equipment and/or battery, please contact your city office, the shop
where you purchased the equipment or your household waste disposal service. The recycling of materials
will help to conserve natural resources and ensure that it is recycled in a manner that protects human
health and environment.
CE Regulatory Notice
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/
EC, the R&TTE Directive 1999/5/EC and the RoHS Directive 2011/65/EC.
EU Health Protection: This equipment should be installed and operated with minimum distance 20cm between the radiator
& your body.
This product will meet the Basic Restriction limits of 1999/519/EC.
EN • 4
Battery warning
lAlways charge using the provided system. Improper handling of the battery may result in explosion.
lNever dismantle or pierce the battery or allow the battery to short-circuit.
lKeep the battery out of reach of children.
lBatteries may explode if exposed to naked fire. Never dispose of batteries in a fire.
lDisposed of used batteries observing local regulations.
lNever replace the battery on your own; have the dealer do it for you.
Notes on Installation
1. This product shall be installed near the rear view mirror, at the centre and top of windshield for optimal
viewing.
2. Make sure that the lens is within the wiping range of the windscreen wiper to ensure a clear view even
when it rains.
3. Do not touch the lens with your fingers. Finger grease may be left on the lens and will result in unclear
videos or snapshots. Clean the lens on a regular basis.
4. Do not install the device on a tinted window. Doing so may damage the tint film.
5. Make sure that the installation position is not hindered by the tinted window.
6. To use the products of the attached power charger only, please do not use other brand power charger, in
order to avoid equipment burn or cause the battery explosion.
Caution
lDue to local laws and vehicles safety considerations, do not operate the device while driving.
lSet up time and date accurately before you use this device.
lPlease use Snooper DVR software in condition that Google Map is function normally.
lThe firmware function in the device is for reference only, please follow the actual road condition.
lThe results of GPS positioning are only for reference, and should not affect the actual driving situation.
The system also cannot ensure the positioning accuracy.
lGPS positioning accuracy may differ depending on weather and location such as high buildings, tunnels,
undergrounds, or forests.
GPS satellite signals cannot pass through solid materials (except glass). Tinted window will also affect the
performance of the GPS satellite reception.
lGPS reception performance on each device may differ. The system cannot determine the accuracy of the
positioning results from different devices.
lThe values displayed in this system, such as speed, position, and the distance warning to the speed
camera set points, may be inaccurate due to the influence of surrounding environment. They are for your
reference only.
lThe system is used only for non-commercial use, within the maximum limits permitted by applicable law.
Our company does not accept any responsibility for any data loss during the operation.
lWi-Fi Signals are unable to pass through the building. The upper limit of signal transmission is 10m.
lWi-Fi Operation Channels List: Ch1~Ch11.
lThe product employs wireless data communication which may interfere, or be interfered by, a near-by
device.
lNever use this device in the vicinity of a microwave oven or at places where there is radio interference.
EN • 5
lRadio wave reception may be worsened in specific environments.
lPlease be advised that if another device is also using the same 2.4GHz band as this product, the
processing speed of both devices may slow down.
lThis product gets warm when in use; this is normal.
lImproper use or operation of the product may result in damage of the product or its accessories and void
the warranty.
lThe radio frequency (RF) generated by this RF electronic device may cause adverse effects on the
operation of other electronic devices and result in malfunctioning. Wireless transmitters and circuitry
may also interfere with other electronic devices. Therefore, do observe the following precautions:
lAircraft: Never use a radio transmitter when you are in an airplane. Please switch off the Wi-Fi function of
the device.
lVehicle: The radio frequency transmitted by this device may affect the electronic system in a motorized
vehicle. Please consult the manufacturer or dealer of your vehicle on the possible effect.
lPacemaker: In order to prevent any potential interference to a pacemaker, anyone who uses a pacemaker
should be advised, that, when using this device, a minimum distance of 15cm (6 inch) should be kept
between the device and the pacemaker; and never put this device in a chest pocket. In case of any doubt
of interference, switch off the device immediately.
lMedical Device: If you use a personal medical device, consult the device manufacturer or your physician
to confirm if your device is sufficiently shielded from the RF transmission of this device.
lMedical Facilities: Hospitals and medical institutes may use facilities that are sensitive to an external RF
energy. Observe such instructions when the medical care personnel or any posted sign requests you to
switch off any device that may interfere the radio frequency.
lExplosion sites or any location with a posted sign: In order to prevent interfering with an explosion
activity, observe all the signage and instructions in the Explosion Area or in a zone with a“Switch Off
2-way Radios”sign by switching off devices that may interfere with the radio frequency.
Before you start using the system, it is assumed that you agree to the
above statement.
EN • 6
1 Introduction
Thank you for purchasing this advanced DVR-4HD. This device is specifically designed for real time video and
audio recording when driving.
1.1 Features
l Full HD recording videos (1920x1080@30fps or 1280x720@60fps)
l 2.7” LCD color touch screen
l Wide angle lens
l Multifunction traffic safety reminder
l Automatic Emergency recording for collision detection
l Support SDHC Level 6 and above. Supports up to 32GB
1.2 Package Contents
The package contains the following items. In case there is any missing or damaged item, contact your dealer
immediately.
DVR-4HD Bracket
CD-ROM Quick start guide Car adapter
EN • 7
1.3 Product Overview
Top and Bottom Views
Side (Left and Right) Views
Front View
Rear View
9
10
11
4
5
7
6
8
1
2
3
No. Item No. Item
1 Bracket Socket 7 Wide Angle Lens
2 Memory Card Slot 8 Wi-Fi Transmission
3 Power Switch 9 Speaker
4 LED Indicator 10 Microphone
5 USB / Power Connector 11 LCD Touch Panel
6 GPS Antenna
EN • 8
2 Getting Started
2.1 Inserting the Memory Card
Insert memory card with the pins upward and the
screen of the device facing upward too, as illustrated.
Push the memory card in until a click sound is heard,
indicating the card is in position.
To remove the memory card
Push to eject the memory card out of the slot.
Note:
1. Do not remove or insert the memory card when the device is turned on. This may damage the memory
card.
2. Please use a Class 6 or higher rating Micro SD card, max. up to 32GB.
3. Please format the micro SD cards before the initial use.
4. When removing the memory card, be careful that the card may spring out and get lost. The memory slot
has this spring-out feature for easy removal of the card.
2.2 Installing in Vehicles
2.2.1 Mount to Windshield
1. Push the bracket into bracket slot on top of device, until a click sound
is heard.
EN • 9
2. With the suction-cup laying flat, position the suction-cup on
the windshield.
3. Hold the base firmly on the windshield and press down the
clamp to mount the car holder to the windshield. Make sure
the base is securely locked in place.
2.2.2 Adjust the device position
1. Loose the knob to swivel the device vertically.
2. Loose the knob to swivel the device horizontally up to
360°.
3. Then tighten the knob to make sure the device is
securely locked in place.
1
2
EN • 10
2.3 Connecting to Power
Use only the attached power connector for activating the device and
charging the built-in battery.
1. Connect one end of power connector to USB/Power connector
port on the device.
2. Plug the other end of the car adapter to the cigarette
lighter socket of your vehicle. Once the vehicle engine
is started, the device automatically turns on.
Note:
1. This product shall be installed near the rear view mirror, at the center and top of windshield for optimal
viewing.
2. This product contains functions such as LDWS (Lane Departure Warning Systems) (3.2.1)
FCWS (Forward Collision Warning System) (3.2.2) and Front Vehicle Go (3.2.3). Please refer to the alignment
measures given in the individual sections during their installation for improved accuracy.
3. Please connect your product to an external power source for operation, otherwise its LCD touch screen
may fail to operate properly. Battery Status Indicator:
Battery Status Indicator:
Icon Description
Full battery power.
2/3 battery power.
1/3 battery power.
Out of battery power.
Battery is charging.
Connect the car adapter to charge the battery, battery is full charged.
Note:
Please take note if the environment temperature reaches 45°C or above, the car adapter still can supply
power to device, but it will not charge the Lithium-ion battery. This is the characteristic of Lithium-ion and is
not a malfunction.
Andere Handbücher für DVR-4HD
2
Inhaltsverzeichnis
Andere Snooper Dashcam Handbücher
Snooper
Snooper DVR-5HD Bedienungsanleitung
Snooper
Snooper DVR-1HD Bedienungsanleitung
Snooper
Snooper DVR-PRO Bedienungsanleitung
Snooper
Snooper MY-SPEED DVR Bedienungsanleitung
Snooper
Snooper My-Speeed DVR Bedienungsanleitung
Snooper
Snooper DVR-4HD Bedienungsanleitung
Snooper
Snooper DVR-2HD Bedienungsanleitung
Snooper
Snooper Syrius Pro Bedienungsanleitung
Snooper
Snooper DVR-4HD Bedienungsanleitung
