Snoppa Vmate S191 Bedienungsanleitung
Introduction----------------------------------------------------------------------1
Product Maintenance-----------------------------------------------------------3
Power/Record Button-----------------------------------------------------------5
Insert the microSD card--------------------------------------------------------7
Charging------------------------------------------------------------------------9
Rotatable lens-------------------------------------------------------------------10
Operating the Touch Screen-------------------------------------------------11
Swipe Right---------------------------------------------------------------------13
Swipe Up------------------------------------------------------------------------16
Swipe Down--------------------------------------------------------------------19
Controlling camera movement on the touch screen------------------21
Media library management--------------------------------------------------23
Downloading the Vmate App------------------------------------------------24
App Connection----------------------------------------------------------------25
App Interface Introductio---------------------------------------------------27
Updating Firmware-----------------------------------------------------------31
Maintenance Notes-----------------------------------------------------------34
Specifications--------------------------------------------------------------35
Introduction
Snoppa Vmate is a palm-sized handheld 4k camera
integrated with a micro 3-axis stabilizing system. It is
remarkably compact, smart and easy to use—allowing
you to capture any moment with a professional touch.
Microphone 1
Tilt Motor
Roll Motor
Power/
Shutter Button
1
Camera
Rotatable lens
Touch Screen
Status LED
Microphone 2
Pan Motor/
Ventilation Area
Lanyard Hole
2
microSD Card Slot
Type-C Port
Product Maintenance
Follow the below instructions to put multi-functional
case on the Vmate; pay attention to the camera
orientation to avoid damage.
*Vmate camera will rotate to a certain direction for
15~20s which is easier to put upper cover on.
3
Storage
4
The multi-functional case can be a phone holder while
protecting Vmate, efficiently for one-handed operation.
Power/Record Button
1.Power On/Off
Power On: In the off state, press the Power/Record
button for around 1 second.
Power Off: In the power-on state, press and hold
Power/Record button for about 2 seconds.
*If your device isn’t working or won’t turn off/on, as
usual, you can force to restart it. Just press and hold
the Power/Record button for 15 seconds or longer.
5
2. Photo/video
Under the shooting interface, tap the power/record
button to take photos or videos.
3. Back to Camera View on the Touch Screen
On any pages on the touch screen can short press the
power/shutter button go back to camera view page in
an instant (exclude camera view page itself).
6
*There will be movement of Vmate three axes (roll,
pitch, and yaw) for self-test during booting up; Do not
touch the device during the period to avoid affecting
the equipment performance .
*Self-discharge in batteries will happen during storage;
please charge the device before turning it on if the
product cannot boot up normally.
Insert the microSD card
Insert the microSD card (Self-purchase) into the
microSD card slot as shown.
It is recommended to use a microSD card with or over a
UHS-1 Speed Class 3 (U3), the max capacity is 512 GB.
Be sure to format the microSD card via the device at the
first use before recording videos/pictures.
7
*Due to the complexity of SD card parameters, below
SD card brands and models are recommended:
1. SanDisk UHS-1 U3 - 64G and over
2. Lexar 667x and over
*A microSD card is required to update firmware and
Swipe up on the touch screen
to enter gimbal Settings page Tap Settings
Tap Available Tap Format SD
8
Charging
When the battery level is low, the red light is always on if
turned on the device. Charge the device in time in case it
running power out and shut down.
Using the Charger that Came with Your Device
1. Use the USB cable that came with your Vmate to
connect your Vmate and the adapter (User-supplied).
2.Plug the adapter into a power socket.
Charging time: Approx. 100 mins (when using a USB
adapter of 5V/2A).
Refer to the below for status LED instructions.
Status LED
Low battery：Solid red
Charing：Blinks green
Full battery/Normal：Solid green
9
Inhaltsverzeichnis
