Snuza PICO Bedienungsanleitung
English
INSTRUCTION MANUAL
READ INSTRUCTIONS IN FULL BEFORE USE
English
IMPORTANT
Snuza Pico is a baby-care aid, not a medical device.
It is not intended for the diagnosis, prevention or
monitoring of a disease, injury or handicap. Pico is
also not suitable for co-sleeping.
SNUZA is a registered trademark of
Snuza International (Pty) Ltd
Unit 11 Roeland Square
Roeland Street
Cape Town 8001
South Africa
Made in South Africa
Patented
English
1. IMPORTANT – READ FIRST! .................................................................................................... 1.
5. Quick Start Guide ........................................................................................................................... 7.
7.8 Battery indications ............................................................................................................... 12.
7.3 Pause ........................................................................................................................................... 10.
9.2 Cleaning and Storage ................................................................................................ 14.
3. Precautions and Contra-indications ..................................................................................... 4.
7. Operation ............................................................................................................................................ 9.
7.1 Fitting your Snuza Pico ....................................................................................................... 7.1
9. Battery ................................................................................................................................................. 14.
8. Rouse Warning ................................................................................................................................ 14.
7.5 Indicator lights ......................................................................................................................... 11.
7.10 Charger indicator light ...................................................................................................... 13.
10. Maintenance ................................................................................................................................... 15.
11. Troubleshooting ............................................................................................................................ 15.
12. Disclaimer ........................................................................................................................................ 15.
14. Regulatory information .............................................................................................................. 16.
15. Technical Description ................................................................................................................. 17.
13. Guarantee ........................................................................................................................................ 16.
2. Introduction ....................................................................................................................................... 3.
6. Diaper (Nappy) Fitment ............................................................................................................... 9.
7.9 Alarm indications .................................................................................................................... 13.
7.4 Charging ..................................................................................................................................... 10.
4. Parts Identication ......................................................................................................................... 5.
7.7 Bluetooth Low Energy ......................................................................................................... 12.
7.2 Switch on/o ............................................................................................................................ 10.
9.1 Battery Indicator ........................................................................................................ 14.
7.6 Movement indicator light ................................................................................................... 12.
7.11 Clothing .................................................................................................................................... 13.
10.1 Disposal ......................................................................................................................... 15.
10.2 Charging the battery ................................................................................................ 15.
CONTENTS
English
1. IMPORTANT – READ FIRST!
The Snuza Pico is designed to be attached to the diaper during sleep so
that your babys movement rate, body temperature and body position can
be continuously monitored and the information is streamed to your smart
device via Bluetooth low energy technology.
Each user is limited to four Snuza Pico’s that can be registered to a single
smart device.
Only one smart device can be connected to a Snuza Pico at any one time.
ALWAYS:
Use the correct size diaper (nappy) to ensure that the
Snuza Pico sits securely on the diaper
Fold the top of the diaper over before attaching the
Snuza Pico to ensure a rm grip. Use the diaper
adjusters to provide a snug t around the tummy.
To attach the Snuza Pico, lift the front lever to release
the clip. Place the clip over the folded diaper to the full
extent of the clip. Close the clip and click the locking
lever closed. Ensure that the clip is closed properly once
placed on the diaper.
To start monitoring press the power button, a start-up
sound will indicate the Snuza Pico has started. Log in
to the app on your smart device. The Snuza Pico will
sync with the App on the Smart device and the data
will be displayed on the dashboard. Note: press the
refresh button on your smart device, if it doesn’t sync
automatically).
Page 1
English
NOTE:
Handle the Snuza Pico with care to prevent damage to clip and always store it
inside the charging cradle when travelling.
For accurate position information, please go to the settings page on the app and
indicate where the The Snuza Pico monitor is attached on the diaper. Ensure that
the Snuza Pico sits squarely on the diaper.
Always follow the above procedure to ensure your baby›s abdominal movement is
being monitored.
Page 2
English
2. INTRODUCTION
Intended user:
This equipment is intended to be operated by the baby’s caregiver. The caregiver
must have a good understanding of the instructions and safety measures within
the user manual.
Usage environment:
Home Safety
The Snuza Pico safely and conveniently monitors your baby’s abdominal
movement while sleeping to provide an early intervention opportunity in the event
of no movement detected.
The Snuza Pico should be clipped onto your baby’s diaper (nappy) for total
portability. No cords, wires, sensor pads, or external power are required.
The Snuza Pico is not suitable for co-sleeping or bed sharing.
The Snuza Pico detects even the slightest abdominal movement and will alert you
if your baby’s movement stops for a period of 20 seconds. The Snuza Pico will
rst vibrate gently after 15 seconds in an attempt to rouse the baby.
If the vibration succeeds in rousing the baby and breathing is detected after
such an event the Snuza Pico will continue to monitor movement. After three
vibration/rouse events, the Rouse Warning will alert you to the fact that your
baby’s abdominal movements have stopped for 15 seconds on three occasions.
The Rouse Warning is characterized by a short beep and ashing of the red
Movement Indicator Light (1) every 2 seconds. Monitoring will continue when the
Rouse Warning is active but will require the caregiver to attend to the baby to
investigate. The Rouse Warning alarm can be reset by briey turning the device
o and then back on. The repeat rouse warning feature can be disabled using the
smart phone application. Each 15 second Rouse warnings will always be notied
on the smart phone application.
The Snuza Pico will also measure the position your baby is in and your baby›s
skin temperature.
Intended Use:
The Snuza Pico is a portable baby movement monitor which safely and
conveniently monitors your baby’s abdominal movement while sleeping.
Page 3
English
3. Precautions and Contra-indications
• This device is not intended to prevent or monitor a disease or condition such as
Obstructive Apnea.
• Movement from external sources such as being pushed in a pram or travelling in
a vehicle or aircraft may be detected by Snuza Pico’s sensor. Snuza Pico should
not be relied upon where external sources of movement are present.
• The monitored baby must sleep in his/her own separate bed as the monitor may
detect the abdominal movement of any other person sharing the bed with the
baby, and will not alarm as long as it detects movement.
• Radio transmitters such as cell phones, audio and video baby monitors, cordless
phones, walkie-talkies, wireless routers, etc. may cause interference with the
monitor’s ability to detect movement. The monitor should not be placed within 2
meters of other transmitting devices or electrical cables.
• No modication of this device is allowed.
• A single device should be dedicated for use with one baby only.
• Small parts that have become detached for some unlikely reason may result in a
choking hazard.
• In case your baby develops skin sensitivity where the device makes contact with
your baby’s skin, refer to section 7.11. If the skin sensitivity persists, contact us
via www.snuza.com.
• Keep out of reach of pets, pests and other children as damage to the device
might cause it to not perform as intended.
• Do not insert anything into the Sound Emission Holes (5).
• Do not allow any liquid to enter the Sound Emission Holes.
• Do not use undue force to bend/open/close the clip (11).
Page 4
English
4. Parts Identication
Page 5
English
Page 6
English
.5 Quick Start Guide
Step 1: Charge your Snuza Pico
Attach the power cord to the charging doc. Ensure that the Snuza Pico is seated
on the charging doc and close the case lid shut. Leave your Snuza Pico charging
for 1 hour.
Step 2: Download the Snuza Connect App
Snuza Connect is available on iOS and Android.
View iOS App guide: http://www.snuza.com/manuals/
View Android App guide: http://www.snuza.com/manuals/
Smart device minimum requirements:
Must support:
• Bluetooth 4.0
• Apple devices: iOS 8.0 or later
• Android devices: Android 4.4 or later
Step 3: Register your Snuza Pico
Go to www.connect.snuza.com. Select the register new membership option and
complete the required elds.
A conrmation email will be sent to your selected email address. Once conrmed,
you will be taken to the Snuza Portal. Navigate to the ‘Device Registration’ tab in
the menu.
Enter your device serial number and complete the required detail elds. The serial
number can be found on the side of the Snuza Pico, or on the side of the Snuza
Pico packaging.
Step 4: Attach Your Snuza Pico
Fold over the top edge and t the diaper snugly.
Lift the clip to release and place the Snuza Pico on your baby’s diaper. Ensure
that the clip is properly closed once placed.
Step 5: Turn on Your Snuza Pico & Start Monitoring
Turn on the Snuza Pico by pressing the power button down until the start-up tone
is heard and all indicator lights ash simultaneously.
Immediately after the start-up sequence, the battery light will ash green to
indicate that the battery is fully charged.
Sync your smart device with the Snuza Pico by simply pressing the refresh icon
on the app screen. You can now start monitoring your baby from your smart
device.
Page 7
Andere Handbücher für PICO
1
Inhaltsverzeichnis
