Softing DataFEED edgeGate Fehlerbehebungshandbuch

dataFEED edgeGate

Quick Startup Guide

Version: EN-082017-1.40

Softing Industrial Automation GmbH

Richard-Reitzner-Allee 6

D-85540 Haar

http://industrial.softing.com

+ 49 89 4 56 56-0

+ 49 89 4 56 56-488

info.automation@softing.com

support.automation@softing.com

Die aktuelle Version dieses Handbuchs finden Sie auch im Softing-Downloadbereich unter

http://industrial.softing.com/de/downloads.html

The information contained in these instructions corresponds to the technical status at the time of

printing of it and is passed on with the best of our knowledge. The information in these

instructions is in no event a basis for warranty claims or contractual agreements concerning the

described products, and may especially not be deemed as warranty concerning the quality and

durability pursuant to Sec. 443 German Civil Code. We reserve the right to make any alterations or

improvements to these instructions without prior notice. The actual design of products may

deviate from the information contained in the instructions if technical alterations and product

improvements so require.

It may not, in part or in its entirety, be reproduced, copied, or transferred into electronic media.

Disclaimer of liability

Table of Contents

Chapter 1 ................................................................................... 4Introduction

................................................................................................................ 41.1 Intended use

................................................................................................................ 51.2 Scope of delivery

................................................................................................................ 51.3 Conventions

................................................................................................................ 61.4 Safety precautions

Chapter 2 ................................................................................... 8Hardware installation

................................................................................................................ 82.1 Mounting and dismounting

................................................................................................................ 102.2 Connecting the power supply

................................................................................................................ 112.3 Connecting to the network

................................................................................................................ 122.4 Powering up the device

................................................................................................................ 122.5 Inserting an SD card

................................................................................................................ 132.6 Resetting the device

Chapter 3 ................................................................................... 14Configuration and login

................................................................................................................ 143.1 IP address information

................................................................................................................ 143.2 IP connection to web server

................................................................................................................ 153.3 Login

................................................................................................................ 163.4 Completing your configuration

Chapter 4 ................................................................................... 17LED status indicators

Chapter 5 ................................................................................... 19Technical data

Chapter 6 ................................................................................... 20Declaration of the manufacturer

dataFEED edgeGate - Quick Startup Guide

1Introduction

Read this manual before starting

Softing Industrial Automation assumes no liability whatsoever under the

existing warranty obligations for damages incurred due to improper use,

connection, implementation or operation of the product.

1.1 Intended use

The dataFEED edgeGate is a gateway connecting industrial networks to IT applications

running on-premises or in the cloud. It connects OPC UA Servers and PLCs with

applications via OPC UA or the MQTT protocol. In addition, the gateway offers deep

integration into selected IoT hubs. With its OPC UA standard compliance, its simple

configuration and its security features, the gateway makes it easy to start with small

solutions and grow them over time.

Note

Faultless and safe operation of the product requires proper transport, proper

storage and installation, and expert operation and maintenance in accordance

with the manual.

Note

If the notes stated in this document are not observed or in case of

inappropriate handling of the device, our liability is waived. In addition, the

warranty on devices and spare parts does no longer apply.

For information about safety aspects refer to Safety precautions.

Chapter 1 - Introduction

1.2 Scope of delivery

dataFEED edgeGate comprises the following parts:

dataFEED edgeGate device (order number GAA-YY-145122)

Quick Startup Guide (this document)

1.3 Conventions

The following conventions are used throughout Softing customer documentation:

Keys, buttons, menu items, commands and

other elements involving user interaction are

set in bold font and menu sequences are

separated by an arrow

Open Start Control Panel

Programs

Buttons from the user interface are enclosed

in brackets and set to bold typeface

Press [Start] to start the application

Coding samples, file extracts and screen

output is set in Courier font type

MaxDlsapAddressSupported=23

File names and directories are written in italic

Device description files are located in

C:\<productname>\delivery\software

\Device Description files

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided,

may result in minor or moderate injury.

Note

This symbol is used to call attention to notable information that should be

followed during installation, use, or servicing of this device.

dataFEED edgeGate - Quick Startup Guide

Hint

This symbol is used when providing you with helpful user hints.

1.4 Safety precautions

CAUTION

This product contains a lithium backup battery. The lithium content is less than

1 g. The battery has been successfully tested by the manufacturer in

accordance with the "Manual of Tests and Criteria" of the United Nations (UN),

Part III: Classification procedures, test methods and criteria, sub-section 38.3.

If the product is handled properly, this battery does not need to be replaced

during the lifetime of the product. Therefore, opening the product is

unnecessary and not permitted. The product must only be operated within the

specified temperature range. Do not expose to heat above this temperature

range and keep away from open fire. Store in a dry place. Improper handling of

lithium batteries can cause the batteries to ignite or explode and pose a burn

hazard to users.

CAUTION

During operation, the device's surface will be heated up. Avoid direct contact.

When servicing, turn off the power supply and wait until surface has cooled

down.

Note

Do not open the housing of the dataFEED edgeGate. It does not contain any

parts that need to be maintained or repaired. In the event of a fault or defect,

remove the device and return it to the vendor. Opening the device will void the

warranty!

Chapter 1 - Introduction

Regulations, standards and directives

This manual does not supersede the relevant national regulations, standards

and directives. These must be observed and have to be applied according to the

national conditions!

dataFEED edgeGate - Quick Startup Guide

2Hardware installation

2.1 Mounting and dismounting

Note

Make sure the dataFEED edgeGate is mounted in a manner that the power

supply disconnecting device or interrupt facility can always be reached easily.

Note

Depending on the installation position, the maximum ambient operating

temperature may differ. Refer to Technical Data for detailed information.

Installation and inspection

Installation and inspection tasks are to be carried out by qualified personnel

only, i.e. personnel qualified according to TRBS 1203 or similar! The definition

of terms can be found in IEC 60079-17.

Mounting

1. For mounting the dataFEED edgeGate on a DIN rail (35 mm), attach the two upper

notches to the rail.

2. Press the device down towards the rail until it locks into place.

Chapter 2 - Hardware installation

Note

Do not put stress on the system by bending or torsion.

Dismounting

To dismount the dataFEED edgeGate from the DIN rail, slide a screw driver horizontally

underneath the housing into the locking bar, slide the bar downwards – without tilting the

screw driver - and fold the device upwards.

dataFEED edgeGate - Quick Startup Guide

2.2 Connecting the power supply

The supply voltage (18 VDC .... 32 VDC) is connected by a 4-pole terminal block. The power

supply is connected to the plug connector via flexible wires with a cross section of 0.75 to

1.5 mm². The ground connection wire must have a cross section of 1.5 mm².

Signal

Description

L2+

Redundant positive supply voltage

L+

Positive supply voltage

Functional Earth

GND

Ground

CAUTION

The Functional Earth (FE) connection of the device has to be connected at low

inductance with the Protective Earth (PE) of the system.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Softing Tor Handbücher

Softing

Softing FG-200 HSE/FF Fehlerbehebungshandbuch

Softing

Softing Modbus mbGate PA Bedienungsanleitung

Softing

Softing pnGate DP Bedienungsanleitung

Softing

Softing echocollect Installations- und Benutzerhandbuch

Softing

Softing uaGate MB Bedienungsanleitung

Softing

Softing echolink one2PROFINET Bedienungsanleitung

Softing

Softing Echochange Bedienungsanleitung

Softing

Softing mbGate PA Fehlerbehebungshandbuch

Softing

Softing FG-260 Fehlerbehebungshandbuch

Softing

Softing pnGate PA Fehlerbehebungshandbuch

Softing

Softing dataFEED uaGate 840D Installationsanleitung

Softing

Softing pnGate PA EX Bedienungsanleitung

Softing

Softing epGate PA Bedienungsanleitung

Softing

Softing echocollect Bedienungsanleitung

Softing

Softing edgeGate Fehlerbehebungshandbuch

Softing

Softing NETLink S7-Compact Bedienungsanleitung

Softing

Softing echolink S7-compact Bedienungsanleitung

Softing

Softing smartLink HW-DP Bedienungsanleitung

Softing

Softing Echochange Bedienungsanleitung

Softing

Softing uaGate SI Fehlerbehebungshandbuch

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

Softing dataFEED edgeGate Fehlerbehebungshandbuch

Beliebte Tor Handbücher anderer Marken