Softing SmartLink HW-DP Bedienungsanleitung

smartLink HW-DP

User Guide

Version: EN-082020-1.00

Softing Industrial Automation GmbH

Richard-Reitzner-Allee 6

85540 Haar / Germany

https://industrial.softing.com

+ 49 89 4 56 56-340

+ 49 89 4 56 56-488

info.idn@softing.com

support.automation@softing.com

Disclaimer of liability

The information contained in these instructions corresponds to the technical status at the time of printing of it and is passed on with the

best of our knowledge. Softing does not warrant that this document is error free. The information in these instructions is in no event a

basis for warranty claims or contractual agreements concerning the described products, and may especially not be deemed as warranty

concerning the quality and durability pursuant to Sec. 443 German Civil Code. We reserve the right to make any alterations or

improvements to these instructions without prior notice. The actual design of products may deviate from the information contained in

the instructions if technical alterations and product improvements so require.

Trademarks

HART® is a registered mark of the FieldComm Group, Texas, USA.

OpenSource

To comply with international software licensing terms, we offer the source files of open source software used in our products. For details

see https://opensource.softing.com/

If you are interested in our source modifications and sources used, please contact: info@softing.com

Scan the QR code to find the latest documentation on the product web page under Downloads.

Version EN-082020-1.00 3

Table of Contents

Chapter 1 ...................................................................................... 5

About this guide

............................................................................................................... 51.1 Read me first

............................................................................................................... 51.2 Target audience

............................................................................................................... 51.3 Typographic conventions

............................................................................................................... 61.4 Document history

............................................................................................................... 61.5 Related documentation and videos

............................................................................................................... 61.6 Document feedback

Chapter 2 ...................................................................................... 7

About smartLink HW-DP

............................................................................................................... 72.1 Intended use

............................................................................................................... 72.2 Specifications

............................................................................................................... 72.3 Supported features

............................................................................................................... 82.4 System requirements

............................................................................................................... 82.5 Safety precautions

Chapter 3 ...................................................................................... 9

Installation

............................................................................................................... 93.1 Hardware installation

.......................................................................................................... 9

Mounting and dismounting

3.1.1

.......................................................................................................... 10

Connection diagrams

3.1.2

.......................................................................................................... 11

Power and alarm connectors

3.1.3

.......................................................................................................... 12

Installation positions

3.1.4

.......................................................................................................... 13

Connecting to the network

3.1.5

.......................................................................................................... 13

Powering up the device

3.1.6

.......................................................................................................... 14

Factory reset

3.1.7

............................................................................................................... 153.2 Software installation

Chapter 4 ...................................................................................... 16

Configuration

............................................................................................................... 164.1 Prerequisites

............................................................................................................... 164.2 Changing the IP address of a smartLink HW-DP

............................................................................................................... 184.3 Setting the IP address of your PC

............................................................................................................... 194.4 Login to user interface

............................................................................................................... 194.5 Configuring PROFIBUS

Chapter 5 ...................................................................................... 20

Connecting with Emerson AMS

............................................................................................................... 205.1 Preparations

............................................................................................................... 205.2 Network configuration

Chapter 6 ...................................................................................... 24

LED status indicators

............................................................................................................... 256.1 Status LEDs startup phase

............................................................................................................... 256.2 Status LEDs – factory mode

............................................................................................................... 256.3 Status LEDs – normal mode

Version EN-082020-1.00

Table of Contents

Chapter 7 ...................................................................................... 26

Working with the user interface

............................................................................................................... 267.1 General functions

............................................................................................................... 267.2 Information

.......................................................................................................... 27

System

7.2.1

.......................................................................................................... 27

License

7.2.2

.......................................................................................................... 27

About

7.2.3

............................................................................................................... 287.3 Settings

.......................................................................................................... 28

Network

7.3.1

.......................................................................................................... 29

User accounts

7.3.2

.......................................................................................................... 31

Firmware update

7.3.3

.......................................................................................................... 33

Reset

7.3.4

.......................................................................................................... 33

HTTPS

7.3.5

.......................................................................................................... 35

Time & Date

7.3.6

.......................................................................................................... 36

Licensing

7.3.7

............................................................................................................... 387.4 Diagnosis

.......................................................................................................... 38

Settings

7.4.1

.......................................................................................................... 39

Logfile

7.4.2

.......................................................................................................... 40

Threads

7.4.3

.......................................................................................................... 40

Status

7.4.4

.......................................................................................................... 41

Live List

7.4.5

............................................................................................................... 427.5 HART IP

.......................................................................................................... 42

Settings

7.5.1

.......................................................................................................... 42

Log

7.5.2

............................................................................................................... 437.6 PROFIBUS

.......................................................................................................... 43

Configuration

7.6.1

.......................................................................................................... 44

Log

7.6.2

Chapter 8 ...................................................................................... 45

Declaration of conformity

Chapter 9 ...................................................................................... 46

Glossary

Chapter 1 - About this guide

Version EN-082020-1.00 5

1About this guide

1.1 Read me first

Please read this guide carefully before using the device to ensure safe and proper use. Softing does not

assume any liability for damages due to improper installation or operation of this product.

This document is not warranted to be error-free. The information contained in this document is subject to

change without prior notice. To obtain the most current version of this guide, visit the Download Center on

our website at: http://industrial.softing.com/en/downloads

1.2 Target audience

This guide is intended for experienced operation personnel and network specialists responsible for

configuring and maintaining field devices in process automation networks. Any person using a smartLink

HW-DP must have read and fully understood the safety requirements and working instructions in this

guide.

1.3 Typographic conventions

The following conventions are used throughout Softing customer documentation:

Keys, buttons, menu items, commands and other

elements involving user interaction are set in

bold font and menu sequences are separated by

an arrow

Open Start Control Panel Programs

Buttons from the user interface are enclosed in

brackets and set to bold typeface

Press [Start] to start the application

Coding samples, file extracts and screen output is

set in Courier font type

MaxDlsapAddressSupported=23

Filenames and directories are written in italic

Device description files are located in C:

\<Application name>\delivery\software

\Device Description files

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in

damage or injury.

Note

This symbol is used to call attention to notable information that should be followed during

installation, use, or servicing of this device.

Hint

This symbol is used when providing you with helpful user hints.

smartLink HW-DP - User Guide

6Version EN-082020-1.00

1.4 Document history

Document version

Changes since last version

1.00

First version

1.5 Related documentation and videos

The following links direct you to additional product information:

Manuals & Documentation

1.6 Document feedback

We would like to encourage you to provide feedback and comments to help us improve the

documentation. You can write your comments and suggestions to the PDF file using the editing tool in

Adobe Reader and email your feedback to support.automation@softing.com.

If you prefer to write your feedback directly as an email, please include the following information with

your comments:

document name

document version (as shown on cover page)

page number

Chapter 2 - About smartLink HW-DP

Version EN-082020-1.00 7

2About smartLink HW-DP

The Softing smartLink HW-DP provides access to the communication system and connects the higher-level

network structure with the field level.

The default configuration allows for a start-up in only a few minutes. In order to prevent network

disruptions by unauthorized configuration changes, all configuration functions are protected by user

administration.

The smartLink HW-DP can be used with the Emerson Asset Management System (AMS) to parameterize

HART field devices.

2.1 Intended use

The device is designed to be used as a secure access point to PROFIBUS networks. Any other use is deemed

non-intended use.

CAUTION

Do not use this device in hazardous areas! See Section Specifications for permissible

ambient conditions.

2.2 Specifications

Power supply

18 VDC...32 VDC; SELV/PELV supply mandatory, typical input current 200 mA

(max. 1 A, considering rush-in current at switch-on).

Ethernet

IEEE 802.3 100BASE-TX/10BASE-T, 10BaseTXHD, 10BaseTXFD, 100BaseTXHD,

100BaseTXFD, 1000BaseTHD, 1000BaseTFD

Minimum ambient

operating temperature

-40 °C (see Installation positions for the maximum ambient temperature

depending on the mounting position)

Storage temperature

-40 °C...+85 °C

Relative humidity

10 %...95 % (non-condensing)

Altitude

must not exceed 2000 m

Location

indoor use only; no direct sunlight

2.3 Supported features

smartLink HW-DP supports the following features:

Parameterization and asset management of HART devices via HART

smartLink HW-DP - User Guide

8Version EN-082020-1.00

2.4 System requirements

To parametrize PROFIBUS and HART devices with your smartLink HW-DP you will need:

access to the Emerson AMS

24V power supply

PC with web browser

Ethernet cable

PROFIBUS cable

2.5 Safety precautions

CAUTION

During operation, the device's surface will be heated up. Avoid direct contact. When servicing,

turn off the power supply and wait until surface has cooled down.

CAUTION

The electronic components of the smartLink HW-DP are sensitive to electrostatic discharges.

Damages due to electrostatic discharge can lead to premature failure of components or

intermittent faults at a later stage. Before installing the smartLink HW-DP, divert the

electrostatic discharge away from your body and the tools used.

Note

Do not open the housing of the smartLink HW-DP. It does not contain any parts that need to

be maintained or repaired. In the event of a fault or defect, remove the device and return it to

the vendor. Opening the device will void the warranty!

Chapter 3 - Installation

Version EN-082020-1.00 9

3Installation

3.1 Hardware installation

Note

With an ambient temperature above 55 °C at the place of installation it is very likely that the

temperatures of connecting cables will increase if the cables are installed in an unfavourable

position. In such cases, measure the temperature to ensure that the service temperature of

the cables is not exceeded or use cables sustaining high temperatures of at least 90 °C.

3.1.1 Mounting and dismounting

Note

Make sure the smartLink HW-DP is mounted in such a way that the power supply can be easily

disconnected. Depending on the installation position, the maximum ambient operating

temperature may differ. See Section Installation positions for details.

Installation and inspection

Installation and inspection must be carried out by qualified personnel only (personnel qualified

according to the German standard TRBS 1203 - Technical Regulations for Operational Safety).

The definition of terms can be found in IEC 60079-17.

Mounting

1. Hook the upper notch of the cut-out on the back of the

device into a 35 mm DIN rail.

2. Leverage the screwdriver upwards, pull the locking bar

downwards and move the device down towards the rail.

3. Press the gateway down towards the rail until it slides into

place over the lip of the locking bar.

Note

Do not put stress on the system by bending or torsion.

Dismounting

1. Slide a screwdriver diagonally under the housing into the

locking bar.

2. Leverage the screwdriver upwards, pull the locking bar

downwards and move the gateway upwards off the rail.

smartLink HW-DP - User Guide

10 Version EN-082020-1.00

3.1.2 Connection diagrams

The following diagram shows the input and output interfaces of the smartLink HW-DP . The device has one

10/100/1000 Base-T Ethernet port (ETH1) and one RS-485 link (DP 1) for PROFIBUS DP data

communication. The connectors on the top are reserved for the supply voltage and alarm output. The uSD

card slot is used for future service purposes and is not supported in the current version of the product.

Andere Handbücher für smartLink HW-DP

Inhaltsverzeichnis

Andere Softing Industrieanlagen Handbücher

Softing

Softing smartLink HW-DP Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Rioned

Rioned UrbanJet Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung