Softing XpertClean Bedienungsanleitung

7209 Chapman Hwy

Knoxville, TN USA 37920

Tel: +1.865.251.5252

Fax: +1.865.579.4740

•Cleans connections on backplanes and jumpers

•Superior for FTTh, FTTt, and FTTn

•Effective for the widest range of contaminants

•Easy to use for quick and reliable cleaning

•Rugged and durable, great for all work sites

•Designed for 1st time cleaning of up to 600 cleanings per kit

2.5mm

CleanMachine for ST,SC,FC Fiber Optic End Faces

ST, SC, FC Connection Kit (Part #: XC-AC-CKIT-STSCFC)

Kit Contains:

1 CleanMachine tool for 2.5mm ST,SC, FC end faces

2 CleanWash fiber optic cleaning pen

1 CleanSwab 2.5mm foam swabs

1 Box of CleanStrip foam platen

1.25mm

CleanMachine for LC Fiber Optic End Faces

LC Connection Kit (Part #: XC-AC-CKIT-LC)

Kit Contains:

1 CleanMachine tool for 1.25mm LC end faces 2

CleanWash fiber optic cleaning pen

1 CleanSwab 1.25mm foam swabs

1 Box of CleanStrip foam platen

The XpertClean process is industry proven,

exceeding IEC 61300-3-35, IEC TR62627-01,

and meeting Telcordia GR-2923-CORE and SAE

Aerospace AIR6031.

Dry media can smear oils, not fully remove dry

particulates, and can create a static field that attracts

and holds onto additional debris. Wet cleaning can

oversaturate connectors, drawing up contamination

from around the ferrule as viewed in IEC 61300-3-35.

The result is unreliable cleaning processes that

provide unreliable results. Without XpertClean

additional cleaning passes, replacement jumpers or

connectors will be required.

CleanMachine

XpertClean For Optimal

Fiber Optic Cleaning

•Finger oils

•Mineral oils and grease

•Gels & pulling lubricants

•Dust, dirt & carbon

•Water & salt residue & more

Softing products are designed for optimal cleaning of

connectors using the XpertClean process. The last

thing you want performance degradation due to a

dirty fiber optic end face in the connector, or even

worse, dust on one end face ground into the end face

of the mating connector scratching the surface

causing permanent damage.

Instead, when disconnecting fiber optic connectors

or before connecting fiber optic cables, best practive

is always to clean the end face, save a picture of the

end face using your fiber optic microscope, and then

test the cable.

Features & Benefits

Precautions:

•Be sure to turn off any laser sources before inspecting any fiber connectors, optical

components, or bulkheads.

• Always wear the appropriate safety glasses. Be sure laser safety glasses meet federal and

state regulations and are matched to the lasers used in your environment.

•Never look into a fiber or bulkhead while the system lasers are on, and never connect a fiber

to a fiberscope while the system lasers are on.

•Never touch the end face of the fiber connectors.

Sales: [email protected]

Support: [email protected]

https://itnetworks.softing.com/us/xpertclean/

The CleanMachine with XpertClean

process gives first time cleaning for all

common soils:

Directions for use:

1 Extend the CleanMachine tip by pushing the

thumb notch and sliding the tip forward.

2 Depress the felt tip of the CleanWash pen on a

hard, clean surface to start cleaning solution flow.*

3 Moisten CleanMachine tip by:*

a) Removing the CleanMachine cap to expose cleaning tip

b) Touching CleanMachine opening to CleanWash pen tip

c) Depressing CleanMachine to first ‘stop’ or until resistance is felt

d) Hold for 3 seconds

Do not oversaturate the tip!

4 Insert the cleaning guide directly into the

bulkhead to be cleaned. Push in gently until

CleanMachine clicks. Recap CleanMachine

and CleanWash when finished.

5For cleaning a patch cord connector, place

cap back onto the CleanMachine tip. Flip open

top and push connector end face onto

moistened cleaning area. Depress

CleanMachine until clicking is heard. Remove

connector.

6Recap CleanMachine and CleanWash when

finished to maintain cleanliness.

*For optimal cleaning we recommend the Combination

End

Face

Wipe

Material

Wet

Dry

CleanMachine

Fast, Effective Bulk Fiber

Connector End-Face Cleaning

The CleanMachine provides a fast, simple

method of fiber optic cleaning. End faces in

bulkheads or on cable assembles are both

effortlessly cleaned the first time . . . every time.

The CleanMachine has an easy to use

mechanism that advances fabric over a

cleaning tip with just a short push and click of

the tool. Using the CleanMachine with the

CleanWash Pen is part of the fast, easy and

repeatable XpertClean process.

Remove cap for cleaning adapters and bulkheads

Flip open cap for cleaning connectors

slide connector

to the right

1. Lift cap

2. Move connector holder to the left

or right side for initial positioning

3. Insert connector into holder with

connector key turned to the left.

SC, FC, ST inserts into larger left

hole. MU and LC insert into

smaller right hole of holder.

4. Move holder only in one direction.

Do not push, only slide left or

right in one direction.

5. Do not use with cleaning liquid

6. When you see a color indicator on

cleaning material, the CleanSlide

is ready to be reordered.

CleanSlide

For hard to reach fiber

end face cleaning

Cleans connectors on back plane and on jumpers

Effective for the widest range of contaminants

Easy to use for quick and reliable cleaning

Rugged and durable, great for all work sites

Up to 600 cleanings per kit

Apply a drop of CleanWash on the cleaning tip fabric. Next, the CleanMachine

click passes the fabric over the end face, dissolving, removing and drying the end

face. This provides cleaning and drying in one simple step.

•

cap

holder

Andere Softing Prüfgeräte Handbücher

Softing

Softing PROFIBUS Tester 5 Bedienungsanleitung

Softing

Softing CableMaster CM500 Bedienungsanleitung

Softing

Softing BC-700-PB Bedienungsanleitung

Softing

Softing NetXpert XG2 PLUS Bedienungsanleitung

Softing

Softing WireXpert WX-4500 Bedienungsanleitung

Softing

Softing NEXPERT XG2-Plus Bedienungsanleitung

Softing

Softing WireXpert Cat6A+Adapters Bedienungsanleitung

Softing

Softing CableMaster 210 Bedienungsanleitung

Softing

Softing CableMaster CM800 Bedienungsanleitung

Softing

Softing CableMaster CM600 Bedienungsanleitung

Softing

Softing Wire Xpert WX Series Bedienungsanleitung

Softing

Softing NetXpert XG Bedienungsanleitung

Softing

Softing WireXpert WX-4500 Bedienungsanleitung

Softing

Softing NetXpert XG2 Bedienungsanleitung

Softing

Softing BC-600-PB Bedienungsanleitung

Softing

Softing CableMaster Bedienungsanleitung

Softing

Softing Wire Xpert WX Series Bedienungsanleitung

Softing

Softing PROFIBUS Tester 4 BC-600-PB Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung