!
!
!
Enabling multiple destinations
!
!
Each Source can have multiple Destinations assigned. As
explained earlier, just tick the checkbox in front of the
destinations that you want to use. In the example here, one
input will be recorded to ProRes and H.264 at the same time.!
!
!
WARNING!
We don’t limit the number of destinations that you can enable per source. But the limit is the
CPU of your computer. Make sure to monitor this and monitor the log window to make sure
that you don’t ask too much.!
!
!
!
About the window icons
!
!
Along the bottom of the MovieRecorder window, you will find a bar with multiple buttons: !
Here is a short description of what they do:!
!
Show or hide the Sources/Destinations pane !
!
Select the number of portals that you want to be displayed in the main window.
Depending on the size of your window, you will be able to select more or less portals.!
!
Turn on and offthe audio Vu-meters that appear in the portals. !
!
Allows you to turn on the display of the time information (Current TC as set in source
settings, Elapsed and Remaining recording times).!
!
Modify the Preview audio volume. Note that additionally you can turn on or off
the audio of each individual portal by clicking on the small audio icon at the
center top of each portal.!
!
Show or hide the “Scheduled Recordings” Panel.!
!
!
!
About the number of portals that you can display!
!
As said above, the number of portals (or viewers) that you can display at once on
your screen depend on the size of your MovieRecorder window. In the example at
the left here, you can see that :!
•The first icon (one portal) is blue. This is the currently selected view.!
•The second and third icons are in light grey. This means that you can display
a maximum of 4 Viewers in this window size. If you want to display more you
will need to make your window bigger.!
•The last 3 icons are greyed out, you can not select them.!
