1. INTRODUCTION
The Solar Comfort by Sun Cloud infrared heating system is a
revolutionary concept offering more efficient heat at less cost.
Solar Comfort’s impressive air quality and effective heating
performance are the result of an innovative system design using
absorption of infrared energy by a unique heat exchanger to
produce, mix, circulate and recycle heated air at the proper
location. The resulting even distribution minimizes heat loss at
walls, windows, and ceilings; saving heat, energy, and money!
This system heats air in much the same way that the sun heats the
earth and its atmosphere by means of safe infrared absorption-
hence the name Solar Comfort.
UNLIKE kerosene, gas, or wood heating which must have
excessive ventilation, (cold air coming into the house) the Solar
Comfort permits the structure to be closed for efficient heating
with no danger of monoxide poisoning or asphyxiation.
Solar Comfort heaters are equipped with a lifetime washable static
filter system which will remove airborne particles as the air is
pulled into the Solar Comfort heating system.
The Solar Comfort is constructed of lifetime galvanized steel,
copper and aluminum metals.
3
7. PERFORMANCE SUGGESTIONS
To assure maximum performance of the Solar Comfort by Sun
Cloud heating system, please note the following recommendations:
1. To insure maximum efficiency, a 40% (minimum) relative
humidity level should be maintained in the heated
environment.
2. For maximum efficiency, locate the back of the Solar Comfort on
an inside wall, exhausting toward the outside wall.
3. If the Solar Comfort is used in an area with bare concrete floors,
position the unit a minimum of three feet above the floor.
4. For maximum efficiency, do not locate the Solar Comfort in an
area with a high rate of air filtration.
5. The Solar Comfort is designed to operate for maximum efficiency
up to the 70-72 degree range.
6. When the Solar Comfort is placed in an isolated area, i.e.
basement, recreation areas, the delivery register and return air
grills of the existing system should be closed in that area if
possible.
7. For efficiency, the Solar Comfort is not recommended for areas
with exposed, un-insulated concrete or metal walls.
8
