SolarEdge SE3680H Bedienungsanleitung

Installation Guide

EV Charging Single Phase

Inverter

with SetApp Configuration

For Europe, APACand South Africa

Version 1.5

Revision History

Version 1.5, May 2020

Modified Power Optimizer Guidelines section: Length of home - run cabels

maximum values , Extension cables rules, Power optimizer clearance

'Creating an Ethernet (LAN) Connection' section- modified firewall destination

address and TCP port number

Modified RS485 terminology - Master is now Leader and Slave is Follower,

respectively

Modified the 'Replacing the Connection Unit' procedure

Modified the 'Connecting the Energy Meter To the Inverter' procedure

Version 1.4, January 2020 - modified image of Connection Unit AC terminals wires in

'To connect the AC grid and grounding to the Connection Unit' procedure

Version 1.3, December 2019 - added image of Connection Unit AC terminals wires in

the 'To connect the AC grid and grounding to the Connection unit ' procedure

Version 1.2, September 2019:

Modified EV charging level 2 to EV charging Mode 3 and added that is also

supports socket type 2.

Added Appendix 'Connecting an External Meter to an Inverter'

Added - For installations in the UK you must comply with BS7671:2018

sections 712 and 722 in 'Connecting the AC and the Strings to the Connection

Unit' section

Added possibility for connecting an inverter in parallel with a generator .

Version 1.1, May 2019 - editorial changes

Version 1.0 , March 2019 - first release

1

EV Charging Single Phase Inverter Guide MAN-01-00583-1.5

Contents

Revision History 1

Contents 2

HANDLING AND SAFETY INSTRUCTIONS 5

Safety Symbols Information 5

IMPORTANTSAFETYINSTRUCTIONS 6

Chapter 1: Introducing the SolarEdge Power Harvesting System 9

Power Optimizer 10

Monitoring Platform 10

EV Charging Single Phase Inverter 10

Installation Procedure 12

Installation Equipment List 12

Inverter Transport and Storage 13

EV Charging Safety Instructions 14

Chapter 2: Installing the Power Optimizer 15

Safety 15

Installation Guidelines 16

Step 1: Mounting the Power Optimizers 18

Step 2: Connecting a PV module to a Power Optimizer 20

Step 3: Connecting Power Optimizers in Strings 20

Step 4: Verifying Proper Power Optimizer Connection 21

Chapter 3: Installing the Inverter 22

Inverter Package Contents 22

Identifying the Inverter 22

Inverter Interfaces 22

Connection Unit Interface 23

Inverter Interface 24

DIPSwitches 25

Buzzer 26

Mounting the Inverter 26

Chapter 4: Connecting the AC and the Strings to the Connection Unit 30

Selecting a Residual Current Device (RCD) 34

Chapter 5: Activating, Commissioning and Configuring the System 35

Step 1: Activating the Installation 35

Step 2: Commissioning and Configuring the Installation 36

Setting Country, Grid and Language 36

Pairing 37

Communication 37

Power Control 38

EV Charging Single Phase Inverter Guide MAN-01-00583-1.5

2 Contents

Step 3: Verifying Proper Activation and Commissioning 38

Viewing System Status 39

Main Inverter Status 40

Site Status 42

Communication Status 43

Inverter Energy Status 44

Meter Status 45

EV Charging Status 46

Reporting and Monitoring Installation Data 46

The Monitoring Platform 46

Creating Logical and Physical Layout using Installation Information 47

Designer 47

Mapper Application 48

Physical Layout Editor 48

Using a Paper Template 48

Chapter 6: Setting Up Communication to the Monitoring Platform 49

Communication Options 49

Ethernet 49

RS485 49

Wi-Fi 50

Cellular 50

Communication Connectors 51

Removing the Inverter Cover 53

Removing the Connection Unit Cover 53

Creating an Ethernet (LAN) Connection 54

Creating an RS485 Bus Connection 57

Verifying the Connection 60

Appendix A: Errors and Troubleshooting 61

Identifying Errors 61

EV Charger-related Troubleshooting 63

Troubleshooting Communication 66

Troubleshooting Ethernet (LAN)Communication 66

Troubleshooting RS485 Communication 66

Additional Troubleshooting 67

Power Optimizer Troubleshooting 68

Appendix B: Replacing and Adding System Components 70

Fuse Replacement 70

Replacing an Inverter 71

Replacing the Connection Unit 73

Appendix C: Connecting the Energy Meter To the Inverter 77

Energy Meter DIPSwitches 77

Energy Meter ID DIPSwitches 77

3

EV Charging Single Phase Inverter Guide MAN-01-00583-1.5

Energy Meter Termination DIPSwitches 77

Appendix D: SafeDC™ 80

Technical Specifications - EV Charging Single Phase Inverter (Europe &

APAC) 81

Inverter Specifications 81

Default Trip Limits and Times According to IEEE1547 84

EV Charger and EV Charger Cable Specifications 85

Mechanical Specifications 87

Support Contact Information 88

EV Charging Single Phase Inverter Guide MAN-01-00583-1.5

4 Contents

HANDLING AND SAFETY INSTRUCTIONS

During installation, testing and inspection, adherence to all the handling and safety

instructions is mandatory. Failure to do so may result in injury or loss of life and

damage to the equipment.

Safety Symbols Information

The following safety symbols are used in this document. Familiarize yourself with the

symbols and their meaning before installing or operating the system.

WARNING!

Denotes a hazard. It calls attention to a procedure that, if not correctly

performed or adhered to, could result in injury or loss of life. Do not proceed

beyond a warning note until the indicated conditions are fully understood and

met.

CAUTION!

Denotes a hazard. It calls attention to a procedure that, if not correctly

performed or adhered to, could result in damage or destruction of the

product. Do not proceed beyond a caution sign until the indicated conditions

are fully understood and met.

NOTE

Denotes additional information about the current subject.

IMPORTANTSAFETYFEATURE

Denotes information about safety issues.

Disposal requirements under the Waste Electrical and Electronic Equipment (WEEE)

regulations:

NOTE

Discard this product according to local regulations or send it back to SolarEdge.

HANDLING AND SAFETY INSTRUCTIONS 5

EV Charging Single Phase Inverter Guide MAN-01-00583-1.5

IMPORTANTSAFETYINSTRUCTIONS

SAVETHESEINSTRUCTIONS

WARNING!

When using electric products, basic precautions should always be followed,

including the following. This manual contains important instructions that shall

be followed during installation, operation and maintenance of the unit.

a. Read all the instructions before using this product.

b. This device should be supervised when used around children.

c. Do not put fingers into the electric vehicle connector.

d. Do not use this product if the flexible power cord or EV cable is frayed, has

broken insulation, or any other signs of damage.

e. Do not use this product if the enclosure or the EV connector is broken,

cracked, open, or shows any other indication of damage.

1. An insulated grounding conductor that is identical in size, insulation

material, and thickness to the grounded and ungrounded branch-circuit

supply conductors, except that it is green with or without one or more

yellow stripes, shall be installed as part of the branch circuit that supplies the

device or system.

2. The grounding conductor described in item 1 shall be grounded to earth at

the service equipment or, when supplied by a separately derived system, at

the supply transformer.

WARNING!

The inverter cover must be opened only after switching the inverter ON/OFF/P

switch located at the bottom of the inverter to OFF. This disables the DC voltage

inside the inverter. Wait five minutes before opening the cover. Otherwise, there

is a risk of electric shock from energy stored in the capacitors.



EV Charging Single Phase Inverter Guide MAN-01-00583-1.5

6 IMPORTANTSAFETYINSTRUCTIONS



WARNING!

Before operating the inverter, ensure that the inverter AC power cable and wall

outlet are grounded properly. This product must be connected to a grounded,

metal, permanent wiring system, or an equipment-grounding conductor must

be run with the circuit conductors and connected to the equipment grounding

terminal or lead on the product.

WARNING!

Opening the inverter and repairing or testing under power must be performed

only by qualified service personnel familiar with this inverter.

WARNING!

Do not touch the PV panels or any rail system connected when the inverter

switch is ON, unless grounded.

WARNING!

SafeDC complies with IEC60947-3 when installing the system with a worst case

SafeDC voltage (under fault conditions) < 120V.

The worst case voltage is defined as: Voc,max+ (String Length-1)*1V, where:

Voc,max = Maximum Voc (at lowest temperature) of the PV modules in the

string (for a string with multiple modules, use the max value)

String Length = number of power optimizers in the string

CAUTION!

This unit must be operated according to the technical specification datasheet

provided with the unit.

CAUTION!

HEAVY OBJECT. To avoid muscle strain or back injury, use proper lifting

techniques, and if required - a lifting aid.

NOTE

Use PV modules rated according to IEC 61730 class A.

IMPORTANTSAFETYINSTRUCTIONS 7

EV Charging Single Phase Inverter Guide MAN-01-00583-1.5

NOTE

The symbol appears at grounding points on the SolarEdge equipment. This

symbol is also used in this manual.

NOTE

A SolarEdge inverter may be installed in a site with a generator. SolarEdge

requires installing a physical or electronic interlock, which will signal to the

inverter when the grid has been disconnected. Interlock procurement,

installation, maintenance and support are the responsibility of the installer.

Damage to the inverter due to incorrect interlock installation or use of an

interlock that is incompatible with the SolarEdge system will render the

SolarEdge warranty invalid.

For more information, refer to

https://www.solaredge.com/sites/default/files/se-inverter-

support-of-voltage-sources.pdf.

NOTE

The following warning symbols appear on the inverter warning label:

Risk of electric shock

Risk of electric shock from energy stored in the capacitor. Do not

remove cover until 5 minutes after disconnecting all sources of

supply.

Hot surface – To reduce the risk of burns, do not touch.

EV Charging Single Phase Inverter Guide MAN-01-00583-1.5

8 IMPORTANTSAFETYINSTRUCTIONS

Chapter 1: Introducing the SolarEdge Power

Harvesting System

The SolarEdge power harvesting solution maximizes the power output from any type of

solar Photovoltaic (PV) installation while reducing the average cost per watt. The

following sections describe each of the system’s components.

Figure 1: The SolarEdge power harvesting system components

Chapter 1: Introducing the SolarEdge Power Harvesting System 9

EV Charging Single Phase Inverter Guide MAN-01-00583-1.5

Andere Handbücher für SE3680H

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SolarEdge Wechselrichter Handbücher

SolarEdge

SolarEdge Home Hub Inverter Three Phase Bedienungsanleitung

SolarEdge

SolarEdge SE15K Bedienungsanleitung

SolarEdge

SolarEdge SE2500H Bedienungsanleitung

SolarEdge

SolarEdge SE K Series Bedienungsanleitung

SolarEdge

SolarEdge SE12.5k Bedienungsanleitung

SolarEdge

SolarEdge SE2200H Bedienungsanleitung

SolarEdge

SolarEdge BI-EU1P Bedienungsanleitung

SolarEdge

SolarEdge SE330K Bedienungsanleitung

SolarEdge

SolarEdge SE12.5k Bedienungsanleitung

SolarEdge

SolarEdge Home Battery 48V Bedienungsanleitung

SolarEdge

SolarEdge SEXXXXH-RWMBNBF54 Bedienungsanleitung

SolarEdge

SolarEdge SE66.6KUS Bedienungsanleitung

SolarEdge

SolarEdge 2.2KW Bedienungsanleitung

SolarEdge

SolarEdge Energy Bank Bedienungsanleitung

SolarEdge

SolarEdge BI-EU1P Bedienungsanleitung

SolarEdge

SolarEdge Dry-Contact switch Bedienungsanleitung

SolarEdge

SolarEdge SE5000H-US Bedienungsanleitung

SolarEdge

SolarEdge SE9KUS Bedienungsanleitung

SolarEdge

SolarEdge SE Series Bedienungsanleitung

SolarEdge

SolarEdge StorEdge SE7600A-USS Bedienungsanleitung

SolarEdge

SolarEdge EV Series Bedienungsanleitung

SolarEdge

SolarEdge SE50K Bedienungsanleitung

SolarEdge

SolarEdge StorEdge Interface SESTI-S4 Bedienungsanleitung

SolarEdge

SolarEdge SE K Series Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

Astrel Group

Astrel Group Power Reducer Kurzanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung