2. Introduction
The present document demonstrates detailed installation instructions for the solar collectors using
the support frames and accessories included in the supply.
Before proceeding with the installation of the collectors, read these instructions and make sure you
have understood. If you have questions about the materials or on the assembly process described
in this document, contact your supplier via telephone, fax or e-mail. Improper installation of the
collectors may cause an unsatisfactory operation of the solar system, compromising its durability
and even be dangerous for the people or the goods.
The instructions of this document do not exempt in any way the compliance with existing
regulations and provisions of technical and administrative application at the place where the facility
is located.
The installation of solar collectors without following the instructions in this document and / or
regulations will invalidate the warranty of the product.
The installer will check before starting the installation that he has all the necessary parts and all the
security measures have been taken in order to carry out the installation safely. The installer must
use protective gloves to avoid any risk of burns or cuts during handling of collectors or its support
frame.
3. Parts Included
The supply consists of:
One or more solar collectors
One or more support frames
One or more fitting and accessories.
3.1. Solar Collectors
3.1.1. Models
3.1.2. Packaging
The solar air collectors are supplied individually packaged in carton boxes. The collector model is
indicated on the outside of each box. Depending on the number of units ordered, collectors can be
supplied palletised in groups of up to 7 units.
